Uploaded December 2023 | Updated November 2026, 21 hours ago
It's a rare issue, but occasionally a Decent machine might need a replacement of a tiny part known as an "O-ring." So what's an O-ring? It's a small, flexible ring that's inserted inside the teflon water tubing of our Decent Espresso machines. Its function is to prevent leaks from thermal cycling or leaks that could occur where the tubing attaches to the next part of the machine. If your DE1 does get a leak, we can send you a replacement O-ring. You probably don't need a new water tube. This video shows you how to remove and replace the O-ring in your Decent machine's water tubing.
A pair of common tweezers are all you need: to pull out the metal pin, and remove the small silicone o-ring. Often, all you need to do is wash the oring, to remove a bit of calcium that might have adhered to it, or other dirt. Or, if the o-ring is damaged, you would put a new one on. Or... the silicone can get harder over time (it can take a decade) and leak due to that.
This connector system was developed by Nestle for Nespresso machines, and is extremely reliable. It does not leak due to temperature cycling, which is a common and big problem with welded or threaded water connectors. However, problems can occur, which is why we show you (in this video) how easy it is to take the connector apart and rebuild it.
It's a rare issue, but occasionally a Decent machine might need a replacement of a tiny part known as an "O-ring." So what's an O-ring? It's a small, flexible ring that's inserted inside the teflon water tubing of our Decent Espresso machines. Its function is to prevent leaks from thermal cycling or leaks that could occur where the tubing attaches to the next part of the machine. If your DE1 does get a leak, we can send you a replacement O-ring. You probably don't need a new water tube. This video shows you how to remove and replace the O-ring in your Decent machine's water tubing.
A pair of common tweezers are all you need: to pull out the metal pin, and remove the small silicone o-ring. Often, all you need to do is wash the oring, to remove a bit of calcium that might have adhered to it, or other dirt. Or, if the o-ring is damaged, you would put a new one on. Or... the silicone can get harder over time (it can take a decade) and leak due to that.
This connector system was developed by Nestle for Nespresso machines, and is extremely reliable. It does not leak due to temperature cycling, which is a common and big problem with welded or threaded water connectors. However, problems can occur, which is why we show you (in this video) how easy it is to take the connector apart and rebuild it.






![How to replace the DE1 wand with the BengleWand on V1.1 DE1 models
In this video, we guide you through the process of replacing the original DE1 steam wand with the new BengleWand on v1.1 Decent Espresso (DE1) models.
Chapters:
[00:08] Tools required
[00:12] Powering down & preparing the machine
[00:41] Removing the main cover
[01:01] Disconnecting and removing the DE1 steam wand
[01:27] Removing the flow meter and bracket
[01:57] Removing the tube from the uptake pipe
[02:11] Connecting the pump tube
[02:21] Preparing and routing the new steam tube
[02:43] Installing and securing the BengleWand
[03:06] Connecting the tube to the wand & Final Lock
[03:20] Contact us if you have any questions
If you run into any difficulties or have questions during the replacement process, please feel free to reach out to us directly through our tech support channel. How to replace the DE1 wand with the BengleWand on V1.1 DE1 models](https://i.ytimg.com/vi/X3H9ouvUyvo/mqdefault.jpg)



