Uploaded March 2025 | Updated November 2026, 3 hours ago
In yesterday's Decent Factory Livestream Mark and John demonstrated how the Decent Espresso machine can now tolerate you fiddling your cup even while using the “stop at weight” scale feature
The problems that John is trying to resolve are:
- after starting to make espresso, the barista notices that the espresso is not being completely captured by the cup, because the cup was not placed correctly. In moving the cup to the right position, they accidentally trigger an early “stop at weight” and the espresso is ruined.
- after starting to make espresso, the barista realizes they forgot to put the cup under the portafilter. They put the cup on, but it weighs so much more than an espresso, that the shot immediately has a “stop at weight” occur, ruining the espresso.
John demonstrated two new features, that are now available in the de1app:
- stop-at-weight now will ignore weight changes during preinfusion. The assumption is that preinfusion should never be enough to be considered a complete espresso (hence, the name “preinfusion” !). This feature fixes problem #1, so you can now move your cup around during preinfusion, even while using the stop-at-weight feature.
- profiles can now be set to “tare” (zero) the scale during their preinfusion cycle. If no espresso is expected to be dripping it out, then this lets the barista place the cup onto the scale, even after the START button has been pressed, and the cup weight be noticed and zeroed out. This feature fixes problem #2, where you forgot to put a cup on the scale and already started to make espresso.
In yesterday's Decent Factory Livestream Mark and John demonstrated how the Decent Espresso machine can now tolerate you fiddling your cup even while using the “stop at weight” scale feature
The problems that John is trying to resolve are:
- after starting to make espresso, the barista notices that the espresso is not being completely captured by the cup, because the cup was not placed correctly. In moving the cup to the right position, they accidentally trigger an early “stop at weight” and the espresso is ruined.
- after starting to make espresso, the barista realizes they forgot to put the cup under the portafilter. They put the cup on, but it weighs so much more than an espresso, that the shot immediately has a “stop at weight” occur, ruining the espresso.
John demonstrated two new features, that are now available in the de1app:
- stop-at-weight now will ignore weight changes during preinfusion. The assumption is that preinfusion should never be enough to be considered a complete espresso (hence, the name “preinfusion” !). This feature fixes problem #1, so you can now move your cup around during preinfusion, even while using the stop-at-weight feature.
- profiles can now be set to “tare” (zero) the scale during their preinfusion cycle. If no espresso is expected to be dripping it out, then this lets the barista place the cup onto the scale, even after the START button has been pressed, and the cup weight be noticed and zeroed out. This feature fixes problem #2, where you forgot to put a cup on the scale and already started to make espresso.



![How to replace the DE1 wand with the BengleWand on V1.1 DE1 models
In this video, we guide you through the process of replacing the original DE1 steam wand with the new BengleWand on v1.1 Decent Espresso (DE1) models.
Chapters:
[00:08] Tools required
[00:12] Powering down & preparing the machine
[00:41] Removing the main cover
[01:01] Disconnecting and removing the DE1 steam wand
[01:27] Removing the flow meter and bracket
[01:57] Removing the tube from the uptake pipe
[02:11] Connecting the pump tube
[02:21] Preparing and routing the new steam tube
[02:43] Installing and securing the BengleWand
[03:06] Connecting the tube to the wand & Final Lock
[03:20] Contact us if you have any questions
If you run into any difficulties or have questions during the replacement process, please feel free to reach out to us directly through our tech support channel. How to replace the DE1 wand with the BengleWand on V1.1 DE1 models](https://i.ytimg.com/vi/X3H9ouvUyvo/mqdefault.jpg)






