Uploaded January 2026 | Updated November 2026, 2 days ago
Learn how to use the Loft command in Autodesk Fusion 360 to build smooth, complex forms by lofting between multiple profiles on different planes. You’ll start with a simple ellipse sketch, create offset construction planes, and project/offset profiles to control the shape. Then you’ll level up the result by using an Intersect extrude to carve a clean, symmetrical enclosure form, finishing it with fillets, shell, and chamfers.
This workflow is perfect for designing enclosures, cases, and product forms where a standard extrude or sweep won’t get you the curvature you want. By the end, you’ll have a glasses-case style model you can split into two halves and “open” with a pivot to preview the interior.
Chapters
00:00 Loft overview and what you’ll build
00:16 Create the first sketch and draw an ellipse
00:35 Set ellipse dimensions
00:52 Plan for loft: multiple sketches on different planes
01:04 Create an offset plane and project the ellipse
01:22 Offset the projected profile for variation
01:34 Add a second offset plane and project again
01:45 Create a loft through three profiles
01:58 Start the intersect workflow for a complex form
02:12 Sketch a slot and extrude with Intersect
02:34 Add fillets to soften edges
02:45 Split the body and begin shelling the halves
03:08 Finish details: shell + chamfer for a clean edge
03:33 Set a pivot and open the case to preview the interior
03:57 Wrap-up: using Loft + Intersect creatively
What you’ll learn
- How to loft between multiple profiles in Fusion 360
- Why offset planes matter for controlled loft shapes
- How projecting and offsetting sketches improves consistency
- Using Intersect extrude to create clean enclosure geometry
- Finishing steps: fillet (5mm), shell (1.5mm), chamfer (0.5mm), split body
#fusion360 #autodeskfusion #cad #3dmodeling #productdesign #loft
Learn how to use the Loft command in Autodesk Fusion 360 to build smooth, complex forms by lofting between multiple profiles on different planes. You’ll start with a simple ellipse sketch, create offset construction planes, and project/offset profiles to control the shape. Then you’ll level up the result by using an Intersect extrude to carve a clean, symmetrical enclosure form, finishing it with fillets, shell, and chamfers.
This workflow is perfect for designing enclosures, cases, and product forms where a standard extrude or sweep won’t get you the curvature you want. By the end, you’ll have a glasses-case style model you can split into two halves and “open” with a pivot to preview the interior.
Chapters
00:00 Loft overview and what you’ll build
00:16 Create the first sketch and draw an ellipse
00:35 Set ellipse dimensions
00:52 Plan for loft: multiple sketches on different planes
01:04 Create an offset plane and project the ellipse
01:22 Offset the projected profile for variation
01:34 Add a second offset plane and project again
01:45 Create a loft through three profiles
01:58 Start the intersect workflow for a complex form
02:12 Sketch a slot and extrude with Intersect
02:34 Add fillets to soften edges
02:45 Split the body and begin shelling the halves
03:08 Finish details: shell + chamfer for a clean edge
03:33 Set a pivot and open the case to preview the interior
03:57 Wrap-up: using Loft + Intersect creatively
What you’ll learn
- How to loft between multiple profiles in Fusion 360
- Why offset planes matter for controlled loft shapes
- How projecting and offsetting sketches improves consistency
- Using Intersect extrude to create clean enclosure geometry
- Finishing steps: fillet (5mm), shell (1.5mm), chamfer (0.5mm), split body
#fusion360 #autodeskfusion #cad #3dmodeling #productdesign #loft










