Uploaded January 2026 | Updated November 2026, 1 day ago
Learn how to model a practical print-in-place hinge in Autodesk Fusion by building a 3D printed cell phone holder that comes off the printer already assembled. You’ll sketch the hinge geometry, add printer-friendly “takeoff” angles, extrude the bodies, cut the clearance volume with Combine, then dial in real-world print tolerances using Offset Face. To finish, you’ll mirror the hinge so it locks in place, build the phone-stand profile, and apply clean fillets sized to common filament line widths.
This workflow is ideal if you want a fast, reliable way to prototype functional moving parts in Fusion without switching to assemblies or joints, while still keeping the model easy to refine later.
Chapters
00:00 What you’ll build: print-in-place hinged phone holder
00:12 Start the sketch: base rectangles and setup
00:49 Sketch the hinge circle and apply constraints
01:13 Add takeoff space and set the 55-degree print angle
02:00 Extrude the first hinge body (10 mm)
02:15 Project geometry, add the cone, and taper for support-free printing
02:51 Extrude the sides and confirm you have two bodies
03:28 Combine cut: create the print-in-place hinge cavity
03:56 Offset Face clearances for real print separation
04:52 Mirror the hinge to lock everything in place
05:13 Sketch the phone holder profile and dimension it
06:33 Extrude, mirror, and combine the holder geometry
07:18 Fillets for strength and comfort (0.8 mm radius tip)
08:51 Print orientation, final edge cleanup, and finishing notes
09:12 Customization ideas and where to take the design next
What you’ll learn in Autodesk Fusion
- Sketch setup with constraints (equal, collinear, tangent, horizontal/vertical)
- Print-in-place hinge geometry that avoids support material
- Extrude strategy for multiple bodies and correct operations (new body vs join)
- Combine tool workflow (target body vs tool body) to create moving clearances
- Offset Face tolerance for FDM printers (example clearances shown in-video)
- Mirror bodies to capture the hinge and keep it functional
- Fillet selection workflow and sizing fillets to filament multiples
#autodeskfusion #3dprinting #printinplace #cad #fusiontutorial
Learn how to model a practical print-in-place hinge in Autodesk Fusion by building a 3D printed cell phone holder that comes off the printer already assembled. You’ll sketch the hinge geometry, add printer-friendly “takeoff” angles, extrude the bodies, cut the clearance volume with Combine, then dial in real-world print tolerances using Offset Face. To finish, you’ll mirror the hinge so it locks in place, build the phone-stand profile, and apply clean fillets sized to common filament line widths.
This workflow is ideal if you want a fast, reliable way to prototype functional moving parts in Fusion without switching to assemblies or joints, while still keeping the model easy to refine later.
Chapters
00:00 What you’ll build: print-in-place hinged phone holder
00:12 Start the sketch: base rectangles and setup
00:49 Sketch the hinge circle and apply constraints
01:13 Add takeoff space and set the 55-degree print angle
02:00 Extrude the first hinge body (10 mm)
02:15 Project geometry, add the cone, and taper for support-free printing
02:51 Extrude the sides and confirm you have two bodies
03:28 Combine cut: create the print-in-place hinge cavity
03:56 Offset Face clearances for real print separation
04:52 Mirror the hinge to lock everything in place
05:13 Sketch the phone holder profile and dimension it
06:33 Extrude, mirror, and combine the holder geometry
07:18 Fillets for strength and comfort (0.8 mm radius tip)
08:51 Print orientation, final edge cleanup, and finishing notes
09:12 Customization ideas and where to take the design next
What you’ll learn in Autodesk Fusion
- Sketch setup with constraints (equal, collinear, tangent, horizontal/vertical)
- Print-in-place hinge geometry that avoids support material
- Extrude strategy for multiple bodies and correct operations (new body vs join)
- Combine tool workflow (target body vs tool body) to create moving clearances
- Offset Face tolerance for FDM printers (example clearances shown in-video)
- Mirror bodies to capture the hinge and keep it functional
- Fillet selection workflow and sizing fillets to filament multiples
#autodeskfusion #3dprinting #printinplace #cad #fusiontutorial










