Uploaded January 2026 | Updated November 2026, 9 hours ago
Learn how to create sweep features in Autodesk Fusion (Fusion 360) by building a profile and sweeping it along a path. This tutorial walks through the core sweep workflow, why your sketches should be perpendicular, and how to level up sweeps with a guide rail for more control when modeling complex, organic forms.
You’ll learn how to:
- Sketch a sweep path using a fit point spline
- Create a perpendicular construction plane using Plane Along a Path
- Sketch a custom profile and sweep it along your path
- Use Path + Guide Rail to shape and steer the sweep
- Understand full extent vs perpendicular sweep behavior
- Edit the original sketches to drive fast parametric changes
Chapters
00:00 Sweep basics in Autodesk Fusion
00:13 Why sweeps need two perpendicular sketches
00:24 Sketch the path (fit point spline on the ground plane)
00:39 Construct a plane along a path for a perpendicular profile
00:53 Create the profile sketch (custom shape, not just a circle)
01:14 Create Sweep: select profile, then select path
01:34 Sweep options overview and what they affect
01:49 Sweep example setup: path, profile, and a guide rail
02:02 Switch Type to Path + Guide Rail and select the rail
02:15 When guide rails matter (complex forms like ergonomic designs)
02:28 Full extent vs perpendicular to path behavior
02:46 Edit sketches to update the sweep (parametric workflow)
03:08 Practice tips and wrap-up
#Fusion360
#AutodeskFusion
#CADTutorial
Learn how to create sweep features in Autodesk Fusion (Fusion 360) by building a profile and sweeping it along a path. This tutorial walks through the core sweep workflow, why your sketches should be perpendicular, and how to level up sweeps with a guide rail for more control when modeling complex, organic forms.
You’ll learn how to:
- Sketch a sweep path using a fit point spline
- Create a perpendicular construction plane using Plane Along a Path
- Sketch a custom profile and sweep it along your path
- Use Path + Guide Rail to shape and steer the sweep
- Understand full extent vs perpendicular sweep behavior
- Edit the original sketches to drive fast parametric changes
Chapters
00:00 Sweep basics in Autodesk Fusion
00:13 Why sweeps need two perpendicular sketches
00:24 Sketch the path (fit point spline on the ground plane)
00:39 Construct a plane along a path for a perpendicular profile
00:53 Create the profile sketch (custom shape, not just a circle)
01:14 Create Sweep: select profile, then select path
01:34 Sweep options overview and what they affect
01:49 Sweep example setup: path, profile, and a guide rail
02:02 Switch Type to Path + Guide Rail and select the rail
02:15 When guide rails matter (complex forms like ergonomic designs)
02:28 Full extent vs perpendicular to path behavior
02:46 Edit sketches to update the sweep (parametric workflow)
03:08 Practice tips and wrap-up
#Fusion360
#AutodeskFusion
#CADTutorial










