Fusion 360 - Case Study 6 @Fusion360School
Fusion 360 - Case Study 6  @Fusion360School
Uploaded August 2020 | Updated November 2026, 1 hour ago
All complex models begin as relatively simple shapes. So how did we get from this basic building block to this screwdriver handle?

You can download the file from the following link:
a360.co/2RYyLaH

Take note that the modelling of this was purely conceptual. The dimensions would not make sense for an actual screwdriver.

If you have found this video useful and would like to support me, you can buy me a coffee at
buymeacoffee.com/fusion360school
or you can also support me on Patreon at
patreon.com/fusion360school?fan_landing=true

Any contribution can go towards improving the quality of the channel. Thank you.

#fusion360school
#fusion360casestudy

0:00 Intro
0:40 Replace faces
2:10 Delete faces
2:42 Ruled surface
3:10 Lofted surface
3:50 Trim surface
4:37 Stitch to create a solid body
5:21 Offset face
5:35 Circular pattern
6:29 Combine
Fusion 360 - Case Study 6Fusion 360 - Case Study 9Autodesk Fusion | Rib?Fusion 360 | V-groove on non-planar frameFusion 360 | Stationery HolderFusion 360 - Hole Callout (Oct 2020 Update)Fusion 360 - 3 Pipe Problem (follow-up)Fusion 360 | Spiral cuts on non-uniform cross sectionAutodesk Fusion | Constrain ComponentsFusion 360 | Case Study 33Fusion 360 - Insert CanvasFusion 360 | Rib Pattern (Follow-up)
Fusion 360 School |

Fusion 360 - Case Study 6

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER