Fusion 360 - 3 Pipe Problem (follow-up) @Fusion360School
Fusion 360 - 3 Pipe Problem (follow-up)  @Fusion360School
Uploaded May 2021 | Updated November 2026, 1 hour ago
A follow-up to the 3 pipe problem.

Model from previous video:
a360.co/2RO1FgA

Model with pipes split in the middle:
a360.co/3hMUu3k

Model with different cross-sections:
a360.co/3oD0qNI


If you have found this video useful and would like to support me, you can buy me a coffee at
buymeacoffee.com/fusion360school
or you can also support me on Patreon at
patreon.com/fusion360school?fan_landing=true

Any contribution can go towards improving the quality of the channel. Thank you.

#fusion360school

0:00 Intro
0:39 Adjust curvature weight
1:15 Patch rail
3:09 Adjust offset planes
3:29 Split pipes in the middle
5:53 Blend between different cross sections
9:10 Secondary operations
Fusion 360 - 3 Pipe Problem (follow-up)Fusion 360 | Spiral cuts on non-uniform cross sectionAutodesk Fusion | Constrain ComponentsFusion 360 | Case Study 33Fusion 360 - Insert CanvasFusion 360 | Rib Pattern (Follow-up)Fusion 360 | How many ways? (Groove only)Fusion 360 | Shell, Web and Rib?Fusion 360 | Solid Extruded Cut/Intersect on Surface BodiesHow I modelled this in Autodesk FusionFusion 360 | Capture HookFusion 360 | Embossing on complex faces (July 2023 update)
Fusion 360 School |

Fusion 360 - 3 Pipe Problem (follow-up)

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER