Uploaded December 2016 | Updated September 2026, 2 weeks ago
FULL WAVE RECTIFIER
The full wave rectifier circuit consist of a two diodes connected with transformer which having AC input and the output shown across the load resistor.
Basically full wave rectifier classified into two parts that is:-Bridge rectifier and center tap rectifier
Center tapped full wave rectifier
In this rectifier positive terminal of diode D1 connected with the transformer and negative terminal connected with center tap through the resistor, similar for diode D2. For the positive half cycle of input. Diode D1 is in forward bias because P-junction of a diode D1 is connected with positive terminal of transformer and diode D2 is in reverse bias because P-junction of diode D2 is connected with negative terminal of transformer. So the current flows through the D1 and diode D2 is in inactive state. Now for the negative cycle of a input diode D2 is in forward bias becauseP-junction of a diode D2 is connected with positive terminal of transformerand D1 is in reverse bias because P-junction of diode D1 is connected with negative terminal of transformer.S0 the current flows through the D2 and D1 is in inactive state. But for both the conditions direction of current across the resistor is same at the center of the transformer. Therefore, for the input negative cycle we will get positive cycle at the output.
Advantages and Disadvantages of Center Tapped Full Wave Rectifier
The main advantage is that the output and efficiency is high because an AC supply delivers power during the both half cycles.
The Disadvantages of the Center tapped full wave rectifier are as follows:-
Each diode utilizes only one-half of the voltage developed in the transformer secondary and thus the DC output obtained is small.
It is difficult to locate the center on the secondary for the tapping.
The diode used must be capable of bearing high peak inverse voltage. Because the peak inverse voltage coming across each diode is twice the maximum voltage across the half of the secondary winding.
____________________________________________
JJD - Adventure [NCS Release]
this music is provided by NCS, the link to the track is
https://www.youtube.com/watch?v=f2xGx...
_________________________________
Download Files From Link:-
mediafire.com/file/dbmsvfyxglfjp7b/full_wave_rectifier_proteus_file.rar
___________________________________
TISHITU
ISO: 9001-2008
RESEARCH AND CONSULTANCY CELL OF INDUSTRIAL APPLICATION
A Joint Accreditation System of Australia and New Zealand
Copyright © All Rights Reserved tishitu.org Reg No.08122629691/SSI
Accreditation No. M3111204IN
-~-~~-~~~-~~-~-
Please watch: "Lifi Communication by Arduino UNO Download Project"
youtube.com/watch?v=c4gC8dbaiZg
-~-~~-~~~-~~-~-
FULL WAVE RECTIFIER
The full wave rectifier circuit consist of a two diodes connected with transformer which having AC input and the output shown across the load resistor.
Basically full wave rectifier classified into two parts that is:-Bridge rectifier and center tap rectifier
Center tapped full wave rectifier
In this rectifier positive terminal of diode D1 connected with the transformer and negative terminal connected with center tap through the resistor, similar for diode D2. For the positive half cycle of input. Diode D1 is in forward bias because P-junction of a diode D1 is connected with positive terminal of transformer and diode D2 is in reverse bias because P-junction of diode D2 is connected with negative terminal of transformer. So the current flows through the D1 and diode D2 is in inactive state. Now for the negative cycle of a input diode D2 is in forward bias becauseP-junction of a diode D2 is connected with positive terminal of transformerand D1 is in reverse bias because P-junction of diode D1 is connected with negative terminal of transformer.S0 the current flows through the D2 and D1 is in inactive state. But for both the conditions direction of current across the resistor is same at the center of the transformer. Therefore, for the input negative cycle we will get positive cycle at the output.
Advantages and Disadvantages of Center Tapped Full Wave Rectifier
The main advantage is that the output and efficiency is high because an AC supply delivers power during the both half cycles.
The Disadvantages of the Center tapped full wave rectifier are as follows:-
Each diode utilizes only one-half of the voltage developed in the transformer secondary and thus the DC output obtained is small.
It is difficult to locate the center on the secondary for the tapping.
The diode used must be capable of bearing high peak inverse voltage. Because the peak inverse voltage coming across each diode is twice the maximum voltage across the half of the secondary winding.
____________________________________________
JJD - Adventure [NCS Release]
this music is provided by NCS, the link to the track is
https://www.youtube.com/watch?v=f2xGx...
_________________________________
Download Files From Link:-
mediafire.com/file/dbmsvfyxglfjp7b/full_wave_rectifier_proteus_file.rar
___________________________________
TISHITU
ISO: 9001-2008
RESEARCH AND CONSULTANCY CELL OF INDUSTRIAL APPLICATION
A Joint Accreditation System of Australia and New Zealand
Copyright © All Rights Reserved tishitu.org Reg No.08122629691/SSI
Accreditation No. M3111204IN
-~-~~-~~~-~~-~-
Please watch: "Lifi Communication by Arduino UNO Download Project"
youtube.com/watch?v=c4gC8dbaiZg
-~-~~-~~~-~~-~-
