Uploaded October 2026 | Updated November 2026, 4 hours ago
Expand your stereo productions into a full 3D immersive experience using the Dolby Atmos tools in Samplitude Suite & Sequoia.
In this video we explain how we made the mix for the Immersive Audio Explained video:
youtu.be/5upINvDggfI
Transforming a standard stereo mix into a spatial audio environment allows for a deeper, more engaging listening experience. This walkthrough demonstrates how to navigate that transition using Samplitude Suite and Sequoia, focusing on the configuration of the ADM Editor to support 7.1.4 Dolby Atmos workflows. You will see how to establish binaural monitoring for headphone-based production, enabling you to place, pan, and size audio objects within a 3D space effectively.
Beyond basic setup, the process explores how to animate your mix through automation. Whether you prefer manually writing parameter movements or using the 3D panel's drawing tools to dictate spatial trajectories—including both linear and time-based automation—these techniques provide the necessary control to bring movement and depth to your soundscapes. This session covers the essentials for mixing engineers looking to move beyond two channels and embrace the possibilities of immersive audio.
Explore more about Samplitude Suite:
borisfx.com/products/samplitude
Explore more about Sequoia:
borisfx.com/products/sequoia
// D I S C O R D C H A N N E L //
borisfxdiscord.com
// K E Y P O I N T S //
• Configuring the ADM Editor for immersive 7.1.4 monitoring and output.
• Setting up binaural headphone mixing to hear 3D spatial positioning without a full speaker array.
• Manipulating 3D objects with control over spread, elevation, and snap-to-speaker features.
• Creating dynamic movement using linear and timing-based automation in the 3D panel.
/ / C H A P T E R L I S T / /
00:00 Introduction
00:12 The Mono to Immersive Video
00:41 The Stereo Mix
01:06 Using the ADM Editor
01:42 Setting Up the Monitoring
02:09 Surround Formats Supported
02:30 Binaural Mixing
03:46 The Spatial Panner
06:22 Binaural Render Modes
07:16 Using Automation to Create Movement
08:25 Draw Automation in the Spatial Panner
09:46 Conclusion
#DolbyAtmos #Samplitude #AudioEngineering
Expand your stereo productions into a full 3D immersive experience using the Dolby Atmos tools in Samplitude Suite & Sequoia.
In this video we explain how we made the mix for the Immersive Audio Explained video:
youtu.be/5upINvDggfI
Transforming a standard stereo mix into a spatial audio environment allows for a deeper, more engaging listening experience. This walkthrough demonstrates how to navigate that transition using Samplitude Suite and Sequoia, focusing on the configuration of the ADM Editor to support 7.1.4 Dolby Atmos workflows. You will see how to establish binaural monitoring for headphone-based production, enabling you to place, pan, and size audio objects within a 3D space effectively.
Beyond basic setup, the process explores how to animate your mix through automation. Whether you prefer manually writing parameter movements or using the 3D panel's drawing tools to dictate spatial trajectories—including both linear and time-based automation—these techniques provide the necessary control to bring movement and depth to your soundscapes. This session covers the essentials for mixing engineers looking to move beyond two channels and embrace the possibilities of immersive audio.
Explore more about Samplitude Suite:
borisfx.com/products/samplitude
Explore more about Sequoia:
borisfx.com/products/sequoia
// D I S C O R D C H A N N E L //
borisfxdiscord.com
// K E Y P O I N T S //
• Configuring the ADM Editor for immersive 7.1.4 monitoring and output.
• Setting up binaural headphone mixing to hear 3D spatial positioning without a full speaker array.
• Manipulating 3D objects with control over spread, elevation, and snap-to-speaker features.
• Creating dynamic movement using linear and timing-based automation in the 3D panel.
/ / C H A P T E R L I S T / /
00:00 Introduction
00:12 The Mono to Immersive Video
00:41 The Stereo Mix
01:06 Using the ADM Editor
01:42 Setting Up the Monitoring
02:09 Surround Formats Supported
02:30 Binaural Mixing
03:46 The Spatial Panner
06:22 Binaural Render Modes
07:16 Using Automation to Create Movement
08:25 Draw Automation in the Spatial Panner
09:46 Conclusion
#DolbyAtmos #Samplitude #AudioEngineering
![Quick Tip : Control Multiple Tracks in Samplitude with Submix Buses [Boris FX]
This quick tutorial focuses on a powerful and efficient workflow: controlling and adding effects to multiple tracks simultaneously. Learn the essential technique of creating and utilizing submix buses to streamline your audio mixing process.
Watch the longer Getting Started with Samplitude video here : https://youtu.be/Ok5tRkj8hHs
Create a submix bus, re-route audio tracks from the master output, and apply group-level adjustments. See how a single bus can control the volume, panning, and effects chain for an entire set of tracks, such as sound effects or background vocals.
Using submix buses is fundamental for maintaining an organized and efficient project, allowing for faster automation and the ability to export stems for advanced versioning.
Download a free trial of Samplitude at borisfx.com : https://borisfx.com/products/samplitude/
// K E Y P O I N T S //
⦁ Learn how to create a submix bus to group multiple audio tracks together.
⦁ Discover how to re-route individual tracks to the new bus using the mixer view.
⦁ Apply global effects, such as reverb and EQ, to all grouped tracks at once.
⦁ Control the overall volume and solo state for your entire track group from a single fader.
⦁ Understand the benefits of using buses for an efficient, non-destructive workflow and for exporting stems.
Learn more about Boris FX Samplitude here: https://borisfx.com/products/samplitude/
// D I S C O R D C H A N N E L //
https://www.borisfxdiscord.com/
#mastering #samplitude #audioediting
/ / C H A P T E R L I S T / /
00:00 Intro
00:19 Adding submix buses
01:21 Routing tracks in Samplitude
02:12 Adding effects to a submix bus
03:55 Conclusion Quick Tip : Control Multiple Tracks in Samplitude with Submix Buses [Boris FX]](https://i.ytimg.com/vi/i60j3oBNzgo/mqdefault.jpg)


![Automatic Face Masking with Face ML & Cryptomatte in Silhouette [Boris FX]
In post-production and beauty work, creating masks for facial features is essential. Silhouettes AI-assisted Face ML tool is designed to streamline this process, saving you valuable time and effort.
Join Ben Brownlee as he shows how to get the best from this powerful tool. Face ML automatically generates accurate alpha channels for skin, eyes, eyebrows, and lips, even on challenging footage with diffusion and movement. This tutorial covers foundational techniques, from generating your first mask to refining it with Matte Repair for smoother, more professional results.
Learn sample workflows to fill gaps in your matte and a clever method to preserve realistic skin texture when performing beauty enhancements. Youll also learn how to output multiple, separate masks from a single Face ML node.
// K E Y P O I N T S //
⦁ Use Face ML to automatically generate precise masks for skin, eyes, lips, and more.
⦁ Use the Matte Repair node to blur, grow, or shrink your masks for seamless compositing and effects work.
⦁ Preserve Realistic Skin Texture with these sample professional workflows to smooth skin while retaining its natural texture.
⦁ Dramatically speed up your workflow by using a single Face ML node with Cryptomatte to extract multiple masks, saving significant system resources.
Learn more about Silhouette here: https://borisfx.com/products/silhouette/
// D I S C O R D C H A N N E L //
https://www.borisfxdiscord.com/
#retouching #VFX #videoeffects
/ / C H A P T E R L I S T / /
00:00 Intro
00:21 Basics of Face ML
02:29 Automated Skin Smoothing #1
04:30 Automated Skin Smoothing #2
08:16 Face ML Fails Automatic Face Masking with Face ML & Cryptomatte in Silhouette [Boris FX]](https://i.ytimg.com/vi/j8nSSgi4Gg8/mqdefault.jpg)






