Uploaded July 2017 | Updated September 2026, 1 hour ago
So these videos were from an opportunity I had to fly back home in Victoria. Weather hasn’t been too good here so time was of the essence to get testing in.
The 3” was really fun to fly and with a bit of work I think it will make a formidable race platform and general fun flyer. Honestly I think 3” racing should be a more common occurrence as they handle very similar to a full 5” frame but have less mass, are cheaper to maintain and open the door for making more crazy courses. Paired with LEDs I think they would also make for an awesome night show and race DRL style. Right now I only have three batteries for it so will have have to wait to get more :)
Hope you enjoy it. Comments and Questions down below :)
Setups:
Flight 1:
Frame: JS 131 “Raptor” prototype
Motors: F20ii 3750kv
ESCs: Sunrise Cicada 10a (2-3s)
Props: HQ3x3x3, will be trying HQ 3x3x4 soon hopefully
FC: Piko BLX (using BF 3.0.1)
VTX: INNOVA VTX/OSD
Battery: Dinogy 600mah 4s
Flight 2:
Frame: Helix
Motors: F40iii 2600kv (really loving these motors)
ESCs: F30a (2-6s) (custom fairings required to fit them on a Helix)
Props: HQ 5x4.5x3 v3
FC: Built in Helix FC
VTX: Built in Helix FC
Battery: Dogcom 1300mah 4s
Flight 3:
Frame: Helix ZX5
Motors: F40ii 2400kv (11 months old and still going)
ESCs: Aikon 30a (2-6s)
Props: HQ 5x4.5x3 v3
FC: Built in Helix FC
VTX: Built in Helix FC
Battery: Dogcom 1300mah 4s
Song:
ODESZA - IPlayYouListen
youtube.com/watch?v=nlF74VhoQKY
So these videos were from an opportunity I had to fly back home in Victoria. Weather hasn’t been too good here so time was of the essence to get testing in.
The 3” was really fun to fly and with a bit of work I think it will make a formidable race platform and general fun flyer. Honestly I think 3” racing should be a more common occurrence as they handle very similar to a full 5” frame but have less mass, are cheaper to maintain and open the door for making more crazy courses. Paired with LEDs I think they would also make for an awesome night show and race DRL style. Right now I only have three batteries for it so will have have to wait to get more :)
Hope you enjoy it. Comments and Questions down below :)
Setups:
Flight 1:
Frame: JS 131 “Raptor” prototype
Motors: F20ii 3750kv
ESCs: Sunrise Cicada 10a (2-3s)
Props: HQ3x3x3, will be trying HQ 3x3x4 soon hopefully
FC: Piko BLX (using BF 3.0.1)
VTX: INNOVA VTX/OSD
Battery: Dinogy 600mah 4s
Flight 2:
Frame: Helix
Motors: F40iii 2600kv (really loving these motors)
ESCs: F30a (2-6s) (custom fairings required to fit them on a Helix)
Props: HQ 5x4.5x3 v3
FC: Built in Helix FC
VTX: Built in Helix FC
Battery: Dogcom 1300mah 4s
Flight 3:
Frame: Helix ZX5
Motors: F40ii 2400kv (11 months old and still going)
ESCs: Aikon 30a (2-6s)
Props: HQ 5x4.5x3 v3
FC: Built in Helix FC
VTX: Built in Helix FC
Battery: Dogcom 1300mah 4s
Song:
ODESZA - IPlayYouListen
youtube.com/watch?v=nlF74VhoQKY
![Canon R8 Vlog Test - Going to La Porchetta in Christchurch, New Zealand
Exactly as the title says, a bit of a learning experience/experiment for me!
Setup:
Canon R8 with RF 28mm f/2.8 STM
Song: Lilac - Catmint [Royalty Free]
Hope you enjoy it. Comments and Questions down below :)
Our website: bmsfpv.com
BMSThomas Youtube: https://www.youtube.com/channel/UCxgr5RBxmJjY8xfMQznt-dQ?
BMSRacing Youtube: https://www.youtube.com/user/BMSWEB
BMSThomas Instagram: https://www.instagram.com/bmsthomas_/
BMSRacing Instagram: https://www.instagram.com/bmsweb/ Canon R8 Vlog Test - Going to La Porchetta in Christchurch, New Zealand](https://i.ytimg.com/vi/byvpsKerVfM/mqdefault.jpg)


![FPV Racing - 2024 Eastside FPV Summer Season Round 1
2024 Eastside FPV Summer Season Round 1: Its been a moment but Im glad to be back! This is my first race of the year and first race in Australia pinching and sitting! To cut a long story short, in late 2021 I incurred a repetitive strain injury in my wrist (from overuse flying and simming), and since then havent had the capacity to train or really go through daily life as I did before. Things didnt really get better over the two years, and I took a month off after my last race to figure out what I want to do with my future.
I came to the conclusion Im either no longer racing competitively, or going to make some serious change to my methodology and try to keep pushing upwards at a fast enough pace to continue to be competitive at the elite level.
I started doing physio and working on a plan to stay in the game, and made the decision to switch to pinching and sitting to reduce wrist strain. Nick from @melbourne.hand.rehab has worked miracles and Im regaining strength again to be able to train properly! Its going to be a long battle to fast track 11 years of thumbing experience to a totally new grip style, but through some good circumstance I managed to kick off the year with a win! Its going to be a lot of work, but in 2024 Im focusing on my piloting how I dreamed of doing as an 18 year old in 2017.
Sending you best wishes for whatever youre pursuing and/or maintaining in 2024, lets do our best!
Hope you enjoy it. Comments and Questions down below :)
BMSThomas Youtube: https://www.youtube.com/channel/UCxgr5RBxmJjY8xfMQznt-dQ?
BMSRacing Youtube: https://www.youtube.com/user/BMSWEB
BMSThomas Instagram: https://www.instagram.com/bmsthomas_/
BMSRacing Instagram: https://www.instagram.com/bmsweb/
Setup used in this video:
Frame: BMS Racing JS-3 Tiger (available at www.bmsfpv.com)
Motors: BMS Racing Raptor V2
ESC: Foxeer 60A Slim
FC: Foxeer H7
VTX: HDZero Race V3
Cam: HDZero 90fps with 1.7mm lens
Props: Gemfan 51366
Battery: Tattu R-Line V5 1400mah 6s
Controller: Radiomaster TX16s Max
Song: Track: T & Sugah - For You (ft. Snnr) [NCS Release]
Music provided by NoCopyrightSounds.
Watch: http://ncs.lnk.to/TSForYouAT/youtube
Free Download / Stream: http://ncs.io/TSForYou FPV Racing - 2024 Eastside FPV Summer Season Round 1](https://i.ytimg.com/vi/cYR8PUyfrHA/mqdefault.jpg)






