Uploaded September 2026 | Updated November 2026, 2 days ago
Welcome, flip clock fans! In this video, I'm taking a close look at a Panasonic RC-6015 — the iconic flip clock that many collectors will recognize from Back to the Future.
I picked this one up on eBay for $94 including tax and shipping. While it was already in remarkably good condition, there were a few things that needed attention: the tuner dial was bent, the clock needed a thorough cleaning, the light needed replacement, the motor needed lubrication, and some of the flip-clock digits showed significant wear.
I'll take you through the restoration process and, just as importantly, point out some of the things you need to be careful about when working on one of these clocks. The plastic case posts can crack, the selector mechanism can be difficult to reassemble, and some of the components are getting increasingly difficult to replace.
One of the most interesting parts of this restoration is the decision to replace the worn flip tiles one at a time rather than completely disassemble the mechanism. It's a slower process, but it reduces the risk of damaging an otherwise exceptionally clean and original clock.
I'll also show you the inside of the clock, discuss the original light and blue filter, lubricate the motor, clean the controls, and straighten the radio dial.
By the end, this Panasonic RC-6015 is looking the way a great vintage flip clock should.
Thanks for watching, and as always, thanks for being a flip clock fan!
#FlipClock #Panasonic #RC6015 #VintageElectronics #ClockRestoration #BackToTheFuture #FlipClockFans
Chapters
00:00 Introduction – The Panasonic RC-6015
01:10 Initial Inspection
01:54 Testing the Alarm, Sleep Function & Light
02:49 A Diamond in the Rough
03:37 Cleaning & What Not to Damage
04:35 The Fragile Plastic Case Posts
05:50 Opening the Clock
06:19 Inspecting the Inside
07:10 Protecting the Speaker & Components
07:44 Removing & Replacing the Light
10:06 Fixing the Radio Dial
11:00 Straightening the Dial Mechanism
11:48 Lubricating & Cleaning the Clock
12:48 Cleaning the Controls
13:35 Installing the Replacement Bulb
14:00 Replacing the Worn Flip Tiles
14:34 Why Complete Disassembly Can Be Risky
15:32 How the Flip-Clock Mechanism Works
16:19 Choosing a Safer Way to Replace the Digits
17:08 Swapping the Digits One at a Time
18:04 The Finished Improvement
18:31 Final Look – The Panasonic RC-6015
CREDITS
Our Executive Producer
Robert Jagers - Well known and respected restorer of flip clocks. Find Robert at:
flipoclock.com
Thanks to all our supporters!
Robert Jagers
Johan de Jong
JW Hopkins
John from NH
Cipri Hosu
Reysic
Kristina Schlah
Gnemelf
Shelli Yoder
Eerchant
Ron Kellis
pategon
Klara Sprudle
Join this channel to get access to perks:
youtube.com/channel/UC0Dn3A3p02pyT0owaYVwZRg/join
Welcome, flip clock fans! In this video, I'm taking a close look at a Panasonic RC-6015 — the iconic flip clock that many collectors will recognize from Back to the Future.
I picked this one up on eBay for $94 including tax and shipping. While it was already in remarkably good condition, there were a few things that needed attention: the tuner dial was bent, the clock needed a thorough cleaning, the light needed replacement, the motor needed lubrication, and some of the flip-clock digits showed significant wear.
I'll take you through the restoration process and, just as importantly, point out some of the things you need to be careful about when working on one of these clocks. The plastic case posts can crack, the selector mechanism can be difficult to reassemble, and some of the components are getting increasingly difficult to replace.
One of the most interesting parts of this restoration is the decision to replace the worn flip tiles one at a time rather than completely disassemble the mechanism. It's a slower process, but it reduces the risk of damaging an otherwise exceptionally clean and original clock.
I'll also show you the inside of the clock, discuss the original light and blue filter, lubricate the motor, clean the controls, and straighten the radio dial.
By the end, this Panasonic RC-6015 is looking the way a great vintage flip clock should.
Thanks for watching, and as always, thanks for being a flip clock fan!
#FlipClock #Panasonic #RC6015 #VintageElectronics #ClockRestoration #BackToTheFuture #FlipClockFans
Chapters
00:00 Introduction – The Panasonic RC-6015
01:10 Initial Inspection
01:54 Testing the Alarm, Sleep Function & Light
02:49 A Diamond in the Rough
03:37 Cleaning & What Not to Damage
04:35 The Fragile Plastic Case Posts
05:50 Opening the Clock
06:19 Inspecting the Inside
07:10 Protecting the Speaker & Components
07:44 Removing & Replacing the Light
10:06 Fixing the Radio Dial
11:00 Straightening the Dial Mechanism
11:48 Lubricating & Cleaning the Clock
12:48 Cleaning the Controls
13:35 Installing the Replacement Bulb
14:00 Replacing the Worn Flip Tiles
14:34 Why Complete Disassembly Can Be Risky
15:32 How the Flip-Clock Mechanism Works
16:19 Choosing a Safer Way to Replace the Digits
17:08 Swapping the Digits One at a Time
18:04 The Finished Improvement
18:31 Final Look – The Panasonic RC-6015
CREDITS
Our Executive Producer
Robert Jagers - Well known and respected restorer of flip clocks. Find Robert at:
flipoclock.com
Thanks to all our supporters!
Robert Jagers
Johan de Jong
JW Hopkins
John from NH
Cipri Hosu
Reysic
Kristina Schlah
Gnemelf
Shelli Yoder
Eerchant
Ron Kellis
pategon
Klara Sprudle
Join this channel to get access to perks:
youtube.com/channel/UC0Dn3A3p02pyT0owaYVwZRg/join










