Fix Damaged Solder Pad on Naze32 or Other Flight Controller 2 @Plan-C
Fix Damaged Solder Pad on Naze32 or Other Flight Controller 2  @Plan-C
Uploaded March 2016 | Updated November 2026, 4 days ago
The camera focus on the first video wasn't great and a few people commented so here is a close-up view of the traces that you need to solder onto if you accidentally lift a pad on the Naze32 or similar. It is filmed through one of those USB microscopes with some commentary and a 'mock-up' of the repair on a new board.

If you do need to do this then it is probably a good idea to re-enforce the join somehow, eg hotglue, or use a row of pin headers across all the remaining pads to help spread the force in any crash where the wire could get pulled again.

I have put a link in the original video to this one. You can see it working on one of my quads in the first video.

Good luck All.
Fix Damaged Solder Pad on Naze32 or Other Flight Controller 2Motor Dropout Tricopter KK2.1.5Ollie the dog at ChristmasPowering A Sinclair QL with an ATX Power SupplyArchimedes A3000 Repair Part 1 (Rough Audio)How to Flash FRSKY D4RII to 27ms Using FTDI Breakout Board and USB Only, No BatteryFixing a Faulty Amiga 500 Plus Board: The Hole StoryBreadboard DRAM Tester for Retro Computers Using ATX PSU + Spectrum StuffZMR250 Build & Weatherproofing VideoHow to fix Amiga 1200 (or other) keyboard ribbon connection (Older Video - Rough Audio)Easy Fix for Loose HDMI PortAcorn A3000 Extreme Refurb : Acid Damaged Acorn and a Magic POSTBox
Plan C |

Fix Damaged Solder Pad on Naze32 or Other Flight Controller 2

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER