Fix Damaged Solder Pad on Naze32 or other Flight Contoller @Plan-C
Fix Damaged Solder Pad on Naze32 or other Flight Contoller  @Plan-C
Uploaded May 2015 | Updated November 2026, 2 hours ago
How to repair & re-inforce missing/lifted/damaged solder pads on Naze32.

Close up ciew of process here: youtu.be/H-rKV8jQEh4

Uses only solder, needle and a few header pins. Especially useful if cppm is desired/required and pin (1) is damaged (eg if RSSI or GPS is needed) or just if you want to save a damaged board... Part of full build video of weather resistant Blackout Mini H with GPS, OSD, decent loiter and RTH.
Fix Damaged Solder Pad on Naze32 or other Flight ContollerArchimedes Mouse for Virtually NothingCheap Jello Fix HQuadCompassmot APM 2.5 with no Power ModuleKK2.1/2.1.5 TriCopter Motor Dropout Fix and troubleshootingRescuing a C64 from Gumtree!Cupcake Quad V3 Changes Made and Lessons LearnedBlackout Mini H Quad Step-by-Step Full Build Log Part 1Cupcake Quad V3 - RTL Test and Flight with GoPro AttachedBeer Can StoveCup cake quad v2 (Superseded)Blackout Mini H Quad Step-by-Step Full Build Log Part 5
Plan C |

Fix Damaged Solder Pad on Naze32 or other Flight Contoller

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER