Uploaded March 2025 | Updated September 2026, 1 day ago
Just a simple straight to the point video showing a firmware issue on the P1S and how to revert back to a previous version. This method works for all Bambu Lab printers!
✅On the side of SteinWipe Motion Control Macros featured in this video, the project continues to evolve based on feedback and support from the community.
Update Feb.2026 :
The project is now solid for P1S P1P X1C with AMS! This project is still active and you can find it here:
patreon.com/collection/1998704 (Original)
patreon.com/collection/1996041 (Pro)
There are tons of new features and Ive discovered many better ways to tackle everything from installing the wiper to SteinSwitches, if you want to go down the new and improved SteinWipe project rabbit hole, these videos and links below are the perfect place to start (in order)!
1) Stay up to date on everything thats been done for SteinWipe:
patreon.com/collection/1994746
2) (this video) No more pasting Gcodes! Everything needed for the slicer is now in a single 3MF file!
youtu.be/jahBdUJ94KI
3) No more editing Gcodes to changes the SteinSwitches, these are now controlled with SteinSwitch Definitions (SSD's). This doc shows you how to use SSD's and what each ones does:
docs.google.com/document/d/1540a3b_T8ESQ08lXcBy6db43X7J7yxPiT3bDuzWYge4/edit?tab=t.0#heading=h.ra1esgt7py0c
4) New pause routine trailer featuring SSD's. I show how to use SSD's at 30 seconds mark:
youtube.com/shorts/cHqVBoUvAgc
5) Get started with the SteinWipe project and basic manual wiper code on MakerWorld for FREE!
makerworld.com/en/models/1025501-steinwipe-nozzle-wiper-for-x1-and-p1-series?from=search#profileId-1050795
6) New wiper install method and new template deep dive:
youtu.be/DPtA6Nmu70I
8) Tune your wiper offsets to prevent a mid-wipe crisis
discord.com/channels/1327182397673832448/1353220347511574608
Just a simple straight to the point video showing a firmware issue on the P1S and how to revert back to a previous version. This method works for all Bambu Lab printers!
✅On the side of SteinWipe Motion Control Macros featured in this video, the project continues to evolve based on feedback and support from the community.
Update Feb.2026 :
The project is now solid for P1S P1P X1C with AMS! This project is still active and you can find it here:
patreon.com/collection/1998704 (Original)
patreon.com/collection/1996041 (Pro)
There are tons of new features and Ive discovered many better ways to tackle everything from installing the wiper to SteinSwitches, if you want to go down the new and improved SteinWipe project rabbit hole, these videos and links below are the perfect place to start (in order)!
1) Stay up to date on everything thats been done for SteinWipe:
patreon.com/collection/1994746
2) (this video) No more pasting Gcodes! Everything needed for the slicer is now in a single 3MF file!
youtu.be/jahBdUJ94KI
3) No more editing Gcodes to changes the SteinSwitches, these are now controlled with SteinSwitch Definitions (SSD's). This doc shows you how to use SSD's and what each ones does:
docs.google.com/document/d/1540a3b_T8ESQ08lXcBy6db43X7J7yxPiT3bDuzWYge4/edit?tab=t.0#heading=h.ra1esgt7py0c
4) New pause routine trailer featuring SSD's. I show how to use SSD's at 30 seconds mark:
youtube.com/shorts/cHqVBoUvAgc
5) Get started with the SteinWipe project and basic manual wiper code on MakerWorld for FREE!
makerworld.com/en/models/1025501-steinwipe-nozzle-wiper-for-x1-and-p1-series?from=search#profileId-1050795
6) New wiper install method and new template deep dive:
youtu.be/DPtA6Nmu70I
8) Tune your wiper offsets to prevent a mid-wipe crisis
discord.com/channels/1327182397673832448/1353220347511574608
