Uploaded July 2025 | Updated September 2026, 4 days ago
In this video, I demonstrate how Chute Tapping works to help with purges sticking inside the purge chute that can cause buildup leading to print failures. Up until now, foil tape has been the only inexpensive solution but its looks.. not so great and leaves residue behind when removed after being installed for a long time. Chute tapping, which is an option within SteinWipe Motion Control, can be enabled by adding the SteinSwitch Definition for it to the printer notes in the machine settings within Bambu Studio. The idea is to use the toolhead to move to the front of the purge chute of the X1C or P1S printers, and move into the chute on the Y axis causing the chute flap to tap the chute wall and it's this motion which is very effective at knocking the purge down if it is stuck.
Chute Tapping preset
leckiestein.com/products/steinwipe-motion-control-lite-chute-tapping?variant=47649131856023
SteinWipe Project Update Feb.2026 :
The project is now solid for P1S P1P X1C with AMS! This project is still active and you can find it here:
patreon.com/collection/1998704 (Original)
patreon.com/collection/1996041 (Pro)
There are tons of new features and Ive discovered many better ways to tackle everything from installing the wiper to SteinSwitches, if you want to go down the new and improved SteinWipe project rabbit hole, these videos and links below are the perfect place to start (in order)!
1) Stay up to date on everything thats been done for SteinWipe:
patreon.com/collection/1994746
2) (this video) No more pasting Gcodes! Everything needed for the slicer is now in a single 3MF file!
youtu.be/jahBdUJ94KI
3) No more editing Gcodes to changes the SteinSwitches, these are now controlled with SteinSwitch Definitions (SSD's). This doc shows you how to use SSD's and what each ones does:
docs.google.com/document/d/1540a3b_T8ESQ08lXcBy6db43X7J7yxPiT3bDuzWYge4/edit?tab=t.0#heading=h.ra1esgt7py0c
4) New pause routine trailer featuring SSD's. I show how to use SSD's at 30 seconds mark:
youtube.com/shorts/cHqVBoUvAgc
5) Get started with the SteinWipe project and basic manual wiper code on MakerWorld for FREE!
makerworld.com/en/models/1025501-steinwipe-nozzle-wiper-for-x1-and-p1-series?from=search#profileId-1050795
6) New wiper install method and new template deep dive:
youtu.be/DPtA6Nmu70I
8) Tune your wiper offsets to prevent a mid-wipe crisis
discord.com/channels/1327182397673832448/1353220347511574608
In this video, I demonstrate how Chute Tapping works to help with purges sticking inside the purge chute that can cause buildup leading to print failures. Up until now, foil tape has been the only inexpensive solution but its looks.. not so great and leaves residue behind when removed after being installed for a long time. Chute tapping, which is an option within SteinWipe Motion Control, can be enabled by adding the SteinSwitch Definition for it to the printer notes in the machine settings within Bambu Studio. The idea is to use the toolhead to move to the front of the purge chute of the X1C or P1S printers, and move into the chute on the Y axis causing the chute flap to tap the chute wall and it's this motion which is very effective at knocking the purge down if it is stuck.
Chute Tapping preset
leckiestein.com/products/steinwipe-motion-control-lite-chute-tapping?variant=47649131856023
SteinWipe Project Update Feb.2026 :
The project is now solid for P1S P1P X1C with AMS! This project is still active and you can find it here:
patreon.com/collection/1998704 (Original)
patreon.com/collection/1996041 (Pro)
There are tons of new features and Ive discovered many better ways to tackle everything from installing the wiper to SteinSwitches, if you want to go down the new and improved SteinWipe project rabbit hole, these videos and links below are the perfect place to start (in order)!
1) Stay up to date on everything thats been done for SteinWipe:
patreon.com/collection/1994746
2) (this video) No more pasting Gcodes! Everything needed for the slicer is now in a single 3MF file!
youtu.be/jahBdUJ94KI
3) No more editing Gcodes to changes the SteinSwitches, these are now controlled with SteinSwitch Definitions (SSD's). This doc shows you how to use SSD's and what each ones does:
docs.google.com/document/d/1540a3b_T8ESQ08lXcBy6db43X7J7yxPiT3bDuzWYge4/edit?tab=t.0#heading=h.ra1esgt7py0c
4) New pause routine trailer featuring SSD's. I show how to use SSD's at 30 seconds mark:
youtube.com/shorts/cHqVBoUvAgc
5) Get started with the SteinWipe project and basic manual wiper code on MakerWorld for FREE!
makerworld.com/en/models/1025501-steinwipe-nozzle-wiper-for-x1-and-p1-series?from=search#profileId-1050795
6) New wiper install method and new template deep dive:
youtu.be/DPtA6Nmu70I
8) Tune your wiper offsets to prevent a mid-wipe crisis
discord.com/channels/1327182397673832448/1353220347511574608
