Uploaded December 2025 | Updated September 2026, 2 weeks ago
In this video I compare test objects printed by FibreSeek (on a FibreSeeker 3) that use continuous carbon fiber reinforcement with parts printed from traditional chopped carbon-fiber filaments. I did not test the FibreSeeker 3 printer — the focus is strictly on the printed specimens and their performance.
I requested my regular test objects for this comparison, but FibreSeek supplied a different set of parts — only 4 out of 10 were the specimens I asked for. In the video I present and test both the requested pieces and the different FibreSeek parts, and I show all results so you can judge how continuous fiber reinforcement performs compared to normal CF filaments.
Product link:
FibreSeeker 3 on KickStarter: kickstarter.com/projects/1763117873/fibreseeker-3-the-first-personal-continuous-fibre-3d-printer
If you like my work, feel free to like and subscribe. Donations are always welcome, and you can also become a Patreon supporter to help me stay independent:
patreon.com/mytechfun
Chapters:
0:00 Introduction
0:48 FibreSeeker 3 specifications (printer used for FibreSeek prints)
2:16 Requested test objects
3:26 FibreSeek test objects
6:21 3D printing own specimens
6:50 FibreSeek footages
7:25 Impact testing(s)
8:38 Bending tests
9:28 Hook test
10:02 Creep test
10:28 All results
10:41 Conclusions
#3Dprinting #carbonfiber #fibreseek #fibreseeker3
In this video I compare test objects printed by FibreSeek (on a FibreSeeker 3) that use continuous carbon fiber reinforcement with parts printed from traditional chopped carbon-fiber filaments. I did not test the FibreSeeker 3 printer — the focus is strictly on the printed specimens and their performance.
I requested my regular test objects for this comparison, but FibreSeek supplied a different set of parts — only 4 out of 10 were the specimens I asked for. In the video I present and test both the requested pieces and the different FibreSeek parts, and I show all results so you can judge how continuous fiber reinforcement performs compared to normal CF filaments.
Product link:
FibreSeeker 3 on KickStarter: kickstarter.com/projects/1763117873/fibreseeker-3-the-first-personal-continuous-fibre-3d-printer
If you like my work, feel free to like and subscribe. Donations are always welcome, and you can also become a Patreon supporter to help me stay independent:
patreon.com/mytechfun
Chapters:
0:00 Introduction
0:48 FibreSeeker 3 specifications (printer used for FibreSeek prints)
2:16 Requested test objects
3:26 FibreSeek test objects
6:21 3D printing own specimens
6:50 FibreSeek footages
7:25 Impact testing(s)
8:38 Bending tests
9:28 Hook test
10:02 Creep test
10:28 All results
10:41 Conclusions
#3Dprinting #carbonfiber #fibreseek #fibreseeker3
