Uploaded January 2026 | Updated September 2026, 2 weeks ago
🔬 Can a compact filtration system really eliminate the unpleasant smell of ABS printing?
In this video, I test the Mintion 3D Printer Filtration System V1 during high-temperature printing, focusing on real-world performance rather than questionable sensor data.
Instead of relying on air quality numbers that don’t properly represent 3D printer emissions, I use a practical ABS/ASA smell test inside an enclosed printer to see how well the HEPA H13 filter and activated carbon bed actually work.
📌 Short answer: this is a realistic test, done the way most users would experience it at home.
🔗 Product link
👉 Mintion 3D Printer Filtration System V1 (affiliate):
tidd.ly/45VS36L
Discount Code: FiltrationV1 — 10% off
❤️ Support my work
If you like my work and want to support independent, long-term filament and hardware testing:
☕ Buy Me a Coffee: buymeacoffee.com/mytechfun
💙 Patreon: patreon.com/mytechfun
Your support helps me keep testing without marketing pressure. Thank you!
🧩 Mentioned in the video
🖨️ 3D printed hook used in this test:
printables.com/model/761881-desk-clamp-with-hook-topology-optimized
Mintion connectors: mintion.net/blogs/3d-printer-accessories-guidelines/compatible-connectors-for-3d-printer-filtration-system-v1
⏱️ Chapters
0:00 Introduction
1:30 Testing method
3:26 Unboxing
5:03 Installation
6:42 Preparing for 3D printing
7:20 3D printing
9:19 Conclusions
#mintion #3dprinting #airfiltration #abs #asa #hepa #voc #3dprinter #filtration #enclosure #healthandsafety #fumes #styrene #engineering #mytechfun
🔬 Can a compact filtration system really eliminate the unpleasant smell of ABS printing?
In this video, I test the Mintion 3D Printer Filtration System V1 during high-temperature printing, focusing on real-world performance rather than questionable sensor data.
Instead of relying on air quality numbers that don’t properly represent 3D printer emissions, I use a practical ABS/ASA smell test inside an enclosed printer to see how well the HEPA H13 filter and activated carbon bed actually work.
📌 Short answer: this is a realistic test, done the way most users would experience it at home.
🔗 Product link
👉 Mintion 3D Printer Filtration System V1 (affiliate):
tidd.ly/45VS36L
Discount Code: FiltrationV1 — 10% off
❤️ Support my work
If you like my work and want to support independent, long-term filament and hardware testing:
☕ Buy Me a Coffee: buymeacoffee.com/mytechfun
💙 Patreon: patreon.com/mytechfun
Your support helps me keep testing without marketing pressure. Thank you!
🧩 Mentioned in the video
🖨️ 3D printed hook used in this test:
printables.com/model/761881-desk-clamp-with-hook-topology-optimized
Mintion connectors: mintion.net/blogs/3d-printer-accessories-guidelines/compatible-connectors-for-3d-printer-filtration-system-v1
⏱️ Chapters
0:00 Introduction
1:30 Testing method
3:26 Unboxing
5:03 Installation
6:42 Preparing for 3D printing
7:20 3D printing
9:19 Conclusions
#mintion #3dprinting #airfiltration #abs #asa #hepa #voc #3dprinter #filtration #enclosure #healthandsafety #fumes #styrene #engineering #mytechfun
