Uploaded October 2025 | Updated September 2026, 2 weeks ago
📝 ASA filaments are often advertised as the outdoor-resistant alternative to ABS. In this video, I test the eSun ASA+ filament to see if it truly performs better under UV ☀️ and temperature 🌡️ stress while keeping good printability and mechanical strength. I go through all my standard tests 🧪 — from layer adhesion to creep and impact resistance — to find out if this filament is really made for the outdoors! 🌳
🛒 Product link:
eSun ASA+ Filament: esun3d.com/asa-pro-product
💖 Support me on Patreon:
If you’d like to support my work, check out my Patreon page:
👉 patreon.com/mytechfun
Patrons get early access to some of my videos 🎬 and access to a summary spreadsheet 📊 with all previous test results for easier comparison.
🔗 Mentioned in the video:
Windmill: makerworld.com/en/models/1893058-windmill-v2
3D printed object inside a car: youtu.be/QdAKd_YbsjI?si=5xH1z8DJkdu6e707
⏱️ Chapters:
0:00 Introduction
0:55 Specifications
1:39 Unboxing 📦
2:06 Slicer settings ⚙️
2:30 AMS compatibility 🎨
3:04 3D printing 🖨️
3:38 Practical application 🔩
4:14 Shrinking 📏
4:35 Tensile test 💪
4:43 Layer adhesion 🧱
5:06 Shear test ✂️
5:23 Torsion test 🔁
5:47 Creep test ⏳
6:29 Temperature test 🌡️
6:52 Bending test 🧰
7:26 Impact tests 💥
9:14 All results 📊
9:41 Conclusions ✅
#eSun #ASA #3DPrinting #FilamentTest #mytechfun #Outdoors #BambuLab #3DPrintingFilament
📝 ASA filaments are often advertised as the outdoor-resistant alternative to ABS. In this video, I test the eSun ASA+ filament to see if it truly performs better under UV ☀️ and temperature 🌡️ stress while keeping good printability and mechanical strength. I go through all my standard tests 🧪 — from layer adhesion to creep and impact resistance — to find out if this filament is really made for the outdoors! 🌳
🛒 Product link:
eSun ASA+ Filament: esun3d.com/asa-pro-product
💖 Support me on Patreon:
If you’d like to support my work, check out my Patreon page:
👉 patreon.com/mytechfun
Patrons get early access to some of my videos 🎬 and access to a summary spreadsheet 📊 with all previous test results for easier comparison.
🔗 Mentioned in the video:
Windmill: makerworld.com/en/models/1893058-windmill-v2
3D printed object inside a car: youtu.be/QdAKd_YbsjI?si=5xH1z8DJkdu6e707
⏱️ Chapters:
0:00 Introduction
0:55 Specifications
1:39 Unboxing 📦
2:06 Slicer settings ⚙️
2:30 AMS compatibility 🎨
3:04 3D printing 🖨️
3:38 Practical application 🔩
4:14 Shrinking 📏
4:35 Tensile test 💪
4:43 Layer adhesion 🧱
5:06 Shear test ✂️
5:23 Torsion test 🔁
5:47 Creep test ⏳
6:29 Temperature test 🌡️
6:52 Bending test 🧰
7:26 Impact tests 💥
9:14 All results 📊
9:41 Conclusions ✅
#eSun #ASA #3DPrinting #FilamentTest #mytechfun #Outdoors #BambuLab #3DPrintingFilament
