Uploaded July 2013 | Updated November 2026, 2 days ago
The TdS equation is a combined statement of the first and second law of thermodynamics. It relates the entropy, enthalpy, and pressure changes in a system (for the form that we need for Crocco's theorem). To keep the big picture in mind, recall that I mentioned that Crocco's theorem is a combination of the thermodynamics and kinematics of a flow. This equation gives us the thermodynamics part.
The TdS equation is a combined statement of the first and second law of thermodynamics. It relates the entropy, enthalpy, and pressure changes in a system (for the form that we need for Crocco's theorem). To keep the big picture in mind, recall that I mentioned that Crocco's theorem is a combination of the thermodynamics and kinematics of a flow. This equation gives us the thermodynamics part.






![Calculating Stoichiometric Fuel-to-Air Ratio
How do you calculate the stoichiometric fuel-to-air ratio for a given fuel? In this video, Ill walk through how to balance the stoichiometric global reaction, and then go through an example for n-decane (C10H22), finally solving for the stoichiometric fuel-to-air ratio.
This fuel-to-air ratio will be important for my future videos on jet engine analysis.
THUMBNAIL CREDIT
By Olivier Cleynen (Own work) [CC BY-SA 3.0 (http://creativecommons.org/licenses/by-sa/3.0)], via Wikimedia Commons Calculating Stoichiometric Fuel-to-Air Ratio](https://i.ytimg.com/vi/P4aV1qbnXMs/mqdefault.jpg)
![Explained: Linspace [MATLAB]
In this video I show you how to use the linspace function in MATLAB to easily create arrays. Explained: Linspace [MATLAB]](https://i.ytimg.com/vi/PA4hJy48eJw/mqdefault.jpg)


![How To: Find Mach Number from a Picture (Part 3)
Want to look at a picture of a bullet/plane/etc. and be able to approximate the Mach number? In the previous videos on this topic (linked to below), I showed three different methods of approximating the Mach number from angles measured in a Schlieren image.
Part 1:
https://goo.gl/50saau
Part 2:
https://goo.gl/gqK19N
For this video, I have updated my Taylor-Maccoll code such that it takes the shock angle and cone angle as inputs (I find them using the Measure Tool from GIMP), and computes the freestream Mach number. This is best way to approximate the Mach number from an image (for conical flow).
I will be explaining and posting my code that I used here in a future video, when I get around to finishing up the derivation of the Taylor-Maccoll equation. If you want to be notified of future videos, please subscribe to my channel.
Photo Credits:
School of Aerospace, Mechanical and Mechatronic Engineering
University of Sydney, 1998-2004
By NASA Glenn Research Center [Public domain], via Wikimedia Commons
NASA photo
http://www.nasa.gov/centers/armstrong/features/shock_and_awesome.html How To: Find Mach Number from a Picture (Part 3)](https://i.ytimg.com/vi/QNcOo5WCR6Q/mqdefault.jpg)