Uploaded March 2017 | Updated November 2026, 2 hours ago
I was watching Scrivscribe's YouTube channel (link down below)the other day where he used epoxy putty to make various items for use around the shop. I was intrigued and decided to try and make a hand spinner fidget toy using the epoxy putty. I know that the balance is key to a good spinner. So I came up with a jig/template that I could reuse to make the fidget spinners. This would allow me to repeatedly make them if I chose too. I used all the parts from the roller blade wheels to construct the jig you see in the video. I am also using this video as my entry to the #SGSpinnerchallenge that was issued by Southern Ginger Workshop (link down below). These are nowhere near as good as 3D printed ones but they perform okay. They are slightly off balance but I think with continued practice this could be remedied. I also think they would perform much better if I had better bearings. I hoope you all find this helpful. Thanks for watching.
Link to Scrivscribe's channel:
youtube.com/channel/UC4qN2oI4MHjHxjJ2F1UtnbA/videos
Link to Scrivscribe's video:
youtube.com/watch?v=qsGqkqo86vM
Link to Southern Ginger Workshop:
youtube.com/channel/UCWjLRDjbQ9eey8G8oLCTxvg
Link to Spinner Challenge playlist:
youtube.com/watch?v=XPrbRnGBvF8&list=PLRo2-oLCRSD5UeeC4tz7XiPbWqVbpEPyv
Affliate links:
amazon.com/gp/product/B000786GLM/ref=as_li_tl?ie=UTF8&tag=dathmama-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B000786GLM&linkId=31629b18b1b4514569c27007d489482d
Bearings:
amazon.com/gp/product/B000FDRQ1S/ref=as_li_tl?ie=UTF8&tag=dathmama-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B000FDRQ1S&linkId=1009ee5394224463bc2b78bfac2ef1ba
I was watching Scrivscribe's YouTube channel (link down below)the other day where he used epoxy putty to make various items for use around the shop. I was intrigued and decided to try and make a hand spinner fidget toy using the epoxy putty. I know that the balance is key to a good spinner. So I came up with a jig/template that I could reuse to make the fidget spinners. This would allow me to repeatedly make them if I chose too. I used all the parts from the roller blade wheels to construct the jig you see in the video. I am also using this video as my entry to the #SGSpinnerchallenge that was issued by Southern Ginger Workshop (link down below). These are nowhere near as good as 3D printed ones but they perform okay. They are slightly off balance but I think with continued practice this could be remedied. I also think they would perform much better if I had better bearings. I hoope you all find this helpful. Thanks for watching.
Link to Scrivscribe's channel:
youtube.com/channel/UC4qN2oI4MHjHxjJ2F1UtnbA/videos
Link to Scrivscribe's video:
youtube.com/watch?v=qsGqkqo86vM
Link to Southern Ginger Workshop:
youtube.com/channel/UCWjLRDjbQ9eey8G8oLCTxvg
Link to Spinner Challenge playlist:
youtube.com/watch?v=XPrbRnGBvF8&list=PLRo2-oLCRSD5UeeC4tz7XiPbWqVbpEPyv
Affliate links:
amazon.com/gp/product/B000786GLM/ref=as_li_tl?ie=UTF8&tag=dathmama-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B000786GLM&linkId=31629b18b1b4514569c27007d489482d
Bearings:
amazon.com/gp/product/B000FDRQ1S/ref=as_li_tl?ie=UTF8&tag=dathmama-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B000FDRQ1S&linkId=1009ee5394224463bc2b78bfac2ef1ba










