Forged Feather Pen - No Lathe Pen Challenge @danthemakerman
Forged Feather Pen - No Lathe Pen Challenge  @danthemakerman
Uploaded January 2017 | Updated November 2026, 14 hours ago
Let me start by saying I am not a blacksmith and I did everything wrong and used all the wrong tools. And no one should ever try to make this or anything else I make ever.

This is my entry for the "No Lathe Pen Challenge" put out by One Car Workshop You tube Channel. Thanks Bill for organizing the challenge and huge thank you and shout out to Rockler for donating the prizes.


I made a feather quill out of flat stock mild steel and a 3/16 inch brass rod. First I cut out the rough shape of the feather but found that it was too wide for my mini forge so I trimmed it further. Then I hammered out the shape of the feather. I added the detail to the feather using various parts of my vice anvil and a chisel. I refined the shape with files and a hacksaw blade. I didnt' include footage of the hacksawing but basically I just made a few random cuts along the edge to try and make it look more like a feather. I then shaped the feather body a little more to give it a rounded look. Then using my belt sander I shaped the brass rod so that it would fit in the groove of the feather. I used plumber's solder to attach the brass rod to the feather. Then I sanded and filed a lot more until it looked relatively clean. Then I made the nib or writing portion of the quill by drilling in to the end of the brass rod. Then using my small belt sander I shaped the nib to a point. While it does write this is a completely impractical pen mainly because of its unbalanced weight. But it was fun to make. Thanks for watching I hope you enjoyed the video.

No Lathe Pen Challenge Playlist:
youtube.com/playlist?list=PLHoCZ7LR6hNrJHIlhZxW876wEhs9ReQTt

One Car Workshop link:
youtube.com/user/johnnyatropos/featured

Rockler:
rockler.com
Forged Feather Pen - No Lathe Pen ChallengeBlack Panther Comic Book Corner Art #laserengraver #marvel #comicbooks #lasercutting #blackpantherOklahoma University Logo - pallet wood DIYHow to Make a Marking Knife for Fine Woodworking JoineryWand/Pen.  I thought this would be a cool idea for making a wand that doubles as a pen.Packaging the Tools I SellHow to Make a Wand Without a LatheFloating Pen Stand #custompen #handmade #maker  #craftfair #pendisplay #woodturning1,000 Subscribers Thank you!!!!!!!Flip Top Tool Stand - Up-cycled Desk - Making It YourselfMagic or magnets?!Easy Recipe Holder - Limited Tools  - Making It Yourself
Daniel Quiroz |

Forged Feather Pen - No Lathe Pen Challenge

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER