Uploaded December 2024 | Updated September 2026, 3 weeks ago
This video covers the first attempt to build the "Big Battery Box". The outer frame is made using the 3D drawings, but I got a feeling that it wasn't going to fit, so I took it to the boat to check.
And it doesn't. :/ Well, this is what prototypes are for.
-=] Patreon:
- patreon.com/TheDigitalMermaid
-=] Channels that have Helped Me;
* @ProjectBrupeg
* @OffGridGarageAustralia @OffGridGarageAustralia
* @AcornToArabella
* @BillCarlson
-=] References;
Getting Sheet Goods Home ... With a Hatchback!
- youtube.com/watch?v=Rz1hiqVaFtk
Cross cut sled
- finewoodworking.com/project-guides/shop-projects/crosscut-sled-for-large-panels
@SailLife - Hurricane damaged catamaran. Mini split AC and leaks
- youtu.be/fs9j9ZOf5rw?t=272
Veritas Bevel-Up Jointer Plane
- veritastools.ca/en-ca/shop/tools/hand-tools/planes/bevel-up/52414-veritas-bevel-up-jointer-plane
TDM - 012 - Boxes and Booms
- youtu.be/HhiEky64BLg?t=2160
Veritas Mk.II Standard Honing Guide
- leevalley.com/en-ca/shop/tools/sharpening/guides/101899-veritas-mk-ii-standard-honing-guide?item=05M0901
-=] Chapters
0:00 - Welcome Back to the Shop
2:20 - Measuring Tape Maintenance
2:59 - Marking Up Cut Boards
4:36 - Why Be Exact With a Prototype?
6:39 - When Metric Isn't Really Metric
8:38 - Mistakes and Mistakes
10:38 - Start Cutting!
13:47 - Offsets, Driers and a Brave Kitty
16:14 - Touching Off and Figuring Fence Offsets
20:33 - Trimming Some Fat With a Hand Plane
22:06 - Picking Back Up
27:09 - Congrats to Andy at the Off-Grid Garage!
29:38 - Cutting The Rebates, Table saw or Router?
31:42 - Cutting Shoulders with a Table Saw
34:02 - Cutting and Clearing the Rebate
36:30 - A Potentially Dangerous Mistake
37:31 - Finishing Cutting The Edge Steps
40:12 - Hand-Sharpening a Chisel
44:53 - Madi Goes to Church
48:17 - Test Assembly of the Outer Box
52:36 - Does It Fit In The Boat?
This video covers the first attempt to build the "Big Battery Box". The outer frame is made using the 3D drawings, but I got a feeling that it wasn't going to fit, so I took it to the boat to check.
And it doesn't. :/ Well, this is what prototypes are for.
-=] Patreon:
- patreon.com/TheDigitalMermaid
-=] Channels that have Helped Me;
* @ProjectBrupeg
* @OffGridGarageAustralia @OffGridGarageAustralia
* @AcornToArabella
* @BillCarlson
-=] References;
Getting Sheet Goods Home ... With a Hatchback!
- youtube.com/watch?v=Rz1hiqVaFtk
Cross cut sled
- finewoodworking.com/project-guides/shop-projects/crosscut-sled-for-large-panels
@SailLife - Hurricane damaged catamaran. Mini split AC and leaks
- youtu.be/fs9j9ZOf5rw?t=272
Veritas Bevel-Up Jointer Plane
- veritastools.ca/en-ca/shop/tools/hand-tools/planes/bevel-up/52414-veritas-bevel-up-jointer-plane
TDM - 012 - Boxes and Booms
- youtu.be/HhiEky64BLg?t=2160
Veritas Mk.II Standard Honing Guide
- leevalley.com/en-ca/shop/tools/sharpening/guides/101899-veritas-mk-ii-standard-honing-guide?item=05M0901
-=] Chapters
0:00 - Welcome Back to the Shop
2:20 - Measuring Tape Maintenance
2:59 - Marking Up Cut Boards
4:36 - Why Be Exact With a Prototype?
6:39 - When Metric Isn't Really Metric
8:38 - Mistakes and Mistakes
10:38 - Start Cutting!
13:47 - Offsets, Driers and a Brave Kitty
16:14 - Touching Off and Figuring Fence Offsets
20:33 - Trimming Some Fat With a Hand Plane
22:06 - Picking Back Up
27:09 - Congrats to Andy at the Off-Grid Garage!
29:38 - Cutting The Rebates, Table saw or Router?
31:42 - Cutting Shoulders with a Table Saw
34:02 - Cutting and Clearing the Rebate
36:30 - A Potentially Dangerous Mistake
37:31 - Finishing Cutting The Edge Steps
40:12 - Hand-Sharpening a Chisel
44:53 - Madi Goes to Church
48:17 - Test Assembly of the Outer Box
52:36 - Does It Fit In The Boat?
