Uploaded May 2019 | Updated September 2026, 2 weeks ago
Learn how to upgrade your Creality Ender 5 (or any other Ender model) to a SeeMeCNC EZR Struder. Discover the right settings and slicer profile for printing TPU and related flexible filaments on your FFM printers.
The concepts discussed in this video apply to all Bowden style FFM printers.
I found the following slicer settings a great start for printing TPU on my Creality Ender:
Speed 20mm/Second (this is key)
Hot End Temperature 230c
Build Plate Temperature 55c
Retraction ON (yes on)
5mm Retraction at 40mm/sec
Combing OFF
Z Hop OFF
Printed on the Creality Ultra-Flexible Removable Magnetic Print Bed with Magigoo.
Let's continue to learn something together.
Irv
---
The following links are to products I have used, reviewed, or evaluated for the MakeWithTech community. Some of the links below are affiliate links that provide commissions, at no cost to you, and help support the MakeWithTech video production, purchase of products for reviews, lab, forum, and web site.
I have reviewed the following printers or similar printers:
➡︎ kit.co/makewithtech/3d-printers-reviewed-on-drvax-youtube-channel
These are some of the tools I use for 3d printing day-to-day:
➡︎ kit.co/makewithtech/basic-3d-printing-tools
I have reviewed or used the following 3d printer upgrades:
➡︎ kit.co/makewithtech/3d-printer-upgrades
Here are the 3d printer filaments I use to evaluate prints, software, and techniques:
➡︎ kit.co/makewithtech/3d-printing-filament-i-use-at-drvax
I will be covering basic electronics and software in future MakeWithTech segments and here are the products I am using:
kit.co/makewithtech/software-and-electronic-kits
Some of the Woodworking products I use:
kit.co/makewithtech/drvax-woodworking-tools-and-supplies
---
** Affiliate disclaimer: some of the above links in my videos may be affiliate links, which generate a sales commission for me. Your price is the same or less than if you go to the site directly. These sales commissions help to support the MakeWithTech channel. (https://makewithtech.com)
** MakeWithTech and the MakeWithTech videos are Copyright Cogitations, LLC. (https://cogitations.com)
** Equipment used in the MakeWithTech videos has the potential to cause injury if misused. Use all equipment and tools at your own risk and follow all manufacturer's safety recommendations.
** Cogitations, LLC licenses all music used in the MakeWithTech videos from Epidemic Sound. Cogitations, LLC uses only authorized or open source clip art and third party images. Images .
Learn how to upgrade your Creality Ender 5 (or any other Ender model) to a SeeMeCNC EZR Struder. Discover the right settings and slicer profile for printing TPU and related flexible filaments on your FFM printers.
The concepts discussed in this video apply to all Bowden style FFM printers.
I found the following slicer settings a great start for printing TPU on my Creality Ender:
Speed 20mm/Second (this is key)
Hot End Temperature 230c
Build Plate Temperature 55c
Retraction ON (yes on)
5mm Retraction at 40mm/sec
Combing OFF
Z Hop OFF
Printed on the Creality Ultra-Flexible Removable Magnetic Print Bed with Magigoo.
Let's continue to learn something together.
Irv
---
The following links are to products I have used, reviewed, or evaluated for the MakeWithTech community. Some of the links below are affiliate links that provide commissions, at no cost to you, and help support the MakeWithTech video production, purchase of products for reviews, lab, forum, and web site.
I have reviewed the following printers or similar printers:
➡︎ kit.co/makewithtech/3d-printers-reviewed-on-drvax-youtube-channel
These are some of the tools I use for 3d printing day-to-day:
➡︎ kit.co/makewithtech/basic-3d-printing-tools
I have reviewed or used the following 3d printer upgrades:
➡︎ kit.co/makewithtech/3d-printer-upgrades
Here are the 3d printer filaments I use to evaluate prints, software, and techniques:
➡︎ kit.co/makewithtech/3d-printing-filament-i-use-at-drvax
I will be covering basic electronics and software in future MakeWithTech segments and here are the products I am using:
kit.co/makewithtech/software-and-electronic-kits
Some of the Woodworking products I use:
kit.co/makewithtech/drvax-woodworking-tools-and-supplies
---
** Affiliate disclaimer: some of the above links in my videos may be affiliate links, which generate a sales commission for me. Your price is the same or less than if you go to the site directly. These sales commissions help to support the MakeWithTech channel. (https://makewithtech.com)
** MakeWithTech and the MakeWithTech videos are Copyright Cogitations, LLC. (https://cogitations.com)
** Equipment used in the MakeWithTech videos has the potential to cause injury if misused. Use all equipment and tools at your own risk and follow all manufacturer's safety recommendations.
** Cogitations, LLC licenses all music used in the MakeWithTech videos from Epidemic Sound. Cogitations, LLC uses only authorized or open source clip art and third party images. Images .
