Uploaded June 2026 | Updated November 2026, 3 hours ago
Emerson Tempest 52" ceiling fan in antique brass. This is another fan that I found in the trash during Cleanup Week 2026. When I saw this one, I almost didn't pick it up, and then almost gave up on it more than once. These have to be some of the most resilient pot metal blade arms ever made. It was absolutely mangled, one arm bent down more than 45° and another nearly as bad. Before even cleaning it I worked on bending them back because I was positive they would break. But they didn't! Had I tried to bend them back gently, they probably would have, but I used sharp hits to basically whack them back into place until I could safely make the small adjustments. I've discovered they seem to be stressed less if the motion is brisk, and if it breaks, it was going to anyway. Still not sure they're all quite in clock or exactly in correct pitch, but it didn't wobble so I stopped adjusting lol. After that, I just wasn't sure it was going to clean up really well. I did a few parts and almost stopped, but decided it's fine if it's not perfect and kept going. In the end, it's pretty good with only a couple really visible blemishes. Glad I kept with it. Operationally it's fine, just a bit of bearing noise that goes away after running for a while. As you can see in the video, the pull chain gets a bit dodgy every once in a while. That didn't present itself until filming, or I might've swapped it out beforehand. It's got the usual big cast Sheng Yuan/Alaska motor, performance is good. I've never been particularly into these and kind of prefer other variants of using this housing, like the Bay Breeze one for Builder's Square, but in antique brass I rather enjoy this one. The shown blade finish with gloss is a very 90s-contemporary combo with AB, that particular aspect takes it to a different level for me and I like it.
Visit My Website: vintagefansandmore.com
VF&M Merch: shop.spreadshirt.com/vintagefansandmore
VF&M LinkedIn: linkedin.com/company/vfandm
Like VF&M on Facebook: facebook.com/vintagefansandmore
Follow me on Instagram: instagram.com/vfandm
Follow me on TikTok: tiktok.com/@vfandm
Follow me on Bluesky: https://bsky.app/profile/vfandm.bsky.social
Consider shopping my Amazon Recommendations to support my channel*: amazon.com/shop/vintagefansmore
#CeilingFan
*As an Amazon Associate I earn from qualifying purchases.
Emerson Tempest 52" ceiling fan in antique brass. This is another fan that I found in the trash during Cleanup Week 2026. When I saw this one, I almost didn't pick it up, and then almost gave up on it more than once. These have to be some of the most resilient pot metal blade arms ever made. It was absolutely mangled, one arm bent down more than 45° and another nearly as bad. Before even cleaning it I worked on bending them back because I was positive they would break. But they didn't! Had I tried to bend them back gently, they probably would have, but I used sharp hits to basically whack them back into place until I could safely make the small adjustments. I've discovered they seem to be stressed less if the motion is brisk, and if it breaks, it was going to anyway. Still not sure they're all quite in clock or exactly in correct pitch, but it didn't wobble so I stopped adjusting lol. After that, I just wasn't sure it was going to clean up really well. I did a few parts and almost stopped, but decided it's fine if it's not perfect and kept going. In the end, it's pretty good with only a couple really visible blemishes. Glad I kept with it. Operationally it's fine, just a bit of bearing noise that goes away after running for a while. As you can see in the video, the pull chain gets a bit dodgy every once in a while. That didn't present itself until filming, or I might've swapped it out beforehand. It's got the usual big cast Sheng Yuan/Alaska motor, performance is good. I've never been particularly into these and kind of prefer other variants of using this housing, like the Bay Breeze one for Builder's Square, but in antique brass I rather enjoy this one. The shown blade finish with gloss is a very 90s-contemporary combo with AB, that particular aspect takes it to a different level for me and I like it.
Visit My Website: vintagefansandmore.com
VF&M Merch: shop.spreadshirt.com/vintagefansandmore
VF&M LinkedIn: linkedin.com/company/vfandm
Like VF&M on Facebook: facebook.com/vintagefansandmore
Follow me on Instagram: instagram.com/vfandm
Follow me on TikTok: tiktok.com/@vfandm
Follow me on Bluesky: https://bsky.app/profile/vfandm.bsky.social
Consider shopping my Amazon Recommendations to support my channel*: amazon.com/shop/vintagefansmore
#CeilingFan
*As an Amazon Associate I earn from qualifying purchases.










