Easy Solar Outdoor Weather Sensor with ESPHome and Home Assistant @TechDregs
Easy Solar Outdoor Weather Sensor with ESPHome and Home Assistant  @TechDregs
Uploaded February 2024 | Updated November 2026, 3 days ago
This will capture temperature, humidity, barometric pressure, and soil moisture. It uses a generic 5V 3W solar panel from Amazon (exact model no longer available), a 180mAh LiPo battery, a Seeed Xiao ESP32-C3, a BME280 sensor, and a capacitive soil moisture sensor.

YAML code for ESPHome, demo Lovelace code for Home Assistant, schematic, and STEP files for the enclosure here:
github.com/techdregs/Outdoor-Weather-Sensor

Lovelace card requires:
github.com/kalkih/mini-graph-card

Videos that may be helpful understanding code and setup:
OTA Updates: youtu.be/jfpaSAlecMk
Old soil moisture sensor: youtu.be/TFiI0tqjUzw

=== Timestamps ===
00:00 Introduction
00:16 Solar Panel
00:52 Parts
04:20 Enclosure and Internals
09:25 Two Compromises
14:38 Conclusion
Easy Solar Outdoor Weather Sensor with ESPHome and Home AssistantNvidia isnt a graphics company anymore...I found best use of generative AI...Looking at a couple of espresso controller projectsOpen Source Business SoftwareMy First Product...Proxmox/Home Assistant Battery Backup with Cyberpower/NUTPump the Brakes on the Steam MachineThe Losi Micro-T is a gateway drugAutoTrickler v4 Tuning GuideAscaso Dream PID Electronics (w/full schematics)DIY Server Part 2: Final Configuration
Tech Dregs |

Easy Solar Outdoor Weather Sensor with ESPHome and Home Assistant

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER