Uploaded December 2023 | Updated November 2026, 1 day ago
A quick and dirty look at the wiring and control electronics of an Ascaso Dream PID. I've traced the PCB out and put up a schematic in the github below. This may be useful if you are ever repairing one of these machines, or if you are simply interested in how a professional espresso control board is laid out.
Github: github.com/techdregs/Ascaso_Dream_PID_Electronics
=== Thumbnail ===
00:00 Introduction
00:31 Wiring Overview
03:35 PCB (Power Supply)
04:50 MCU (STM32) and connectors
07:03 Programming port
07:15 Optoisolators and switching
08:50 Comparison with Breville's approach
10:20 Conclusion
A quick and dirty look at the wiring and control electronics of an Ascaso Dream PID. I've traced the PCB out and put up a schematic in the github below. This may be useful if you are ever repairing one of these machines, or if you are simply interested in how a professional espresso control board is laid out.
Github: github.com/techdregs/Ascaso_Dream_PID_Electronics
=== Thumbnail ===
00:00 Introduction
00:31 Wiring Overview
03:35 PCB (Power Supply)
04:50 MCU (STM32) and connectors
07:03 Programming port
07:15 Optoisolators and switching
08:50 Comparison with Breville's approach
10:20 Conclusion










