Uploaded November 2020 | Updated September 2026, 3 weeks ago
In my first look video of the Eachine Razor, one of the main bad points for me was the small connectors for the servos on the wing joiners. In that video I said that when I find the appropriate connector, I'll let you guys know. Well, I've found them. I have included a link in the original video. But I decided to make another video too, so that people don't miss it.
These plugs in this link fit the small servo connector on the joiner. It's a sung fit, but all works fine. Buy a 1.25 female to 1.25 female pack and cut the wire in half. This will give you the connectors for both wings. With the one I received, I found that swapping the red and black wires gave the correct wiring order. But check with the etching on the in side of the connector.
Buy the connector here bit.ly/MrD_3983DPz
If you found the video useful, I'd appreciate a thumbs up. This will help YouTube share this video with other RC pilots who may find it helpful. If you would like to get more videos when they become available, please subscribe and click the notifications bell icon. If there are links above, they may be affiliate links. If you click them, it will help me and my channel at no additional cost to you.
There are more tutorials on my web site at https://www.MrD-RC.com. You can also join like-minded people at the Fixed Wing RC Rebels group on Facebook. Also, if you found my videos useful, and would like to leave me a little tip, you could always buy me a Coffee at mrd-rc.com/go/ko-fi
Thank you for your time, and don't forget to fly it like you stole it!
In my first look video of the Eachine Razor, one of the main bad points for me was the small connectors for the servos on the wing joiners. In that video I said that when I find the appropriate connector, I'll let you guys know. Well, I've found them. I have included a link in the original video. But I decided to make another video too, so that people don't miss it.
These plugs in this link fit the small servo connector on the joiner. It's a sung fit, but all works fine. Buy a 1.25 female to 1.25 female pack and cut the wire in half. This will give you the connectors for both wings. With the one I received, I found that swapping the red and black wires gave the correct wiring order. But check with the etching on the in side of the connector.
Buy the connector here bit.ly/MrD_3983DPz
If you found the video useful, I'd appreciate a thumbs up. This will help YouTube share this video with other RC pilots who may find it helpful. If you would like to get more videos when they become available, please subscribe and click the notifications bell icon. If there are links above, they may be affiliate links. If you click them, it will help me and my channel at no additional cost to you.
There are more tutorials on my web site at https://www.MrD-RC.com. You can also join like-minded people at the Fixed Wing RC Rebels group on Facebook. Also, if you found my videos useful, and would like to leave me a little tip, you could always buy me a Coffee at mrd-rc.com/go/ko-fi
Thank you for your time, and don't forget to fly it like you stole it!
