Uploaded January 2024 | Updated November 2026, 2 days ago
Dynamic Temperature and Relay Control & Monitoring over WiFi using ESP 01, HTML, CSS, and AJAX
======================================
Article: eeweb.com/dynamic-temperature-and-relay-control-monitoring-over-wifi-using-esp-01-html-css-and-ajax
======================================
Altium Designer + Legal License (Free): altium.com/yt/myvanitar
======================================
Altium 365: altium.com/altium-365
======================================
OctoPart: octopart.com
======================================
Other Videos: bit.ly/2N9OlPa
======================================
ESP-01 is a tiny and useful piece of hardware. It has a 32-bit MCU, 2.4GHz 802.11 b/g/n WiFi, 1MB flash memory, and several other useful embedded features. Such specifications allow us to use it for a variety of remote controlling/monitoring projects. In this article/video, I designed a circuit to monitor the temperature and control a Relay over the local WiFi. You only need to visit the IP address of the board in your computer/mobile phone browser.
To design the schematic and PCB, I used Altium Designer, embedded a DS18B20 sensor to sense the temperature, and a small 5V-10A Panasonic Relay to control an external device. You can power the board using a 5V USB Type-C cable, such as a mobile phone charger or a power bank. I paid attention to supply filtering and decoupling to ensure the stable operation of the device.
The webpage data is stored in the flash memory of the ESP-01 module. Ajax coding allows the temperature value to get updated every second, without any need to refresh the webpage. Similarly, you can control the state of the Relay anytime.
Dynamic Temperature and Relay Control & Monitoring over WiFi using ESP 01, HTML, CSS, and AJAX
======================================
Article: eeweb.com/dynamic-temperature-and-relay-control-monitoring-over-wifi-using-esp-01-html-css-and-ajax
======================================
Altium Designer + Legal License (Free): altium.com/yt/myvanitar
======================================
Altium 365: altium.com/altium-365
======================================
OctoPart: octopart.com
======================================
Other Videos: bit.ly/2N9OlPa
======================================
ESP-01 is a tiny and useful piece of hardware. It has a 32-bit MCU, 2.4GHz 802.11 b/g/n WiFi, 1MB flash memory, and several other useful embedded features. Such specifications allow us to use it for a variety of remote controlling/monitoring projects. In this article/video, I designed a circuit to monitor the temperature and control a Relay over the local WiFi. You only need to visit the IP address of the board in your computer/mobile phone browser.
To design the schematic and PCB, I used Altium Designer, embedded a DS18B20 sensor to sense the temperature, and a small 5V-10A Panasonic Relay to control an external device. You can power the board using a 5V USB Type-C cable, such as a mobile phone charger or a power bank. I paid attention to supply filtering and decoupling to ensure the stable operation of the device.
The webpage data is stored in the flash memory of the ESP-01 module. Ajax coding allows the temperature value to get updated every second, without any need to refresh the webpage. Similarly, you can control the state of the Relay anytime.


![How to Design the Component Libraries in Altium Designer [Beginners Tutorial]
How to Design the Component Libraries in Altium Designer [From Scratch]
Altium Designer + License (Free): https://www.altium.com/yt/myvanitar
In this video, you will learn (Altium Designer beginners tutorial) how to design/create a schematic symbol and a PCB footprint (a component library) in Altium designer and attach a 3D model to the footprint. Basically, you will create an integrated library and then you will add a schematic symbol and the PCB footprint. Then you are ready to compile the library and use it. My selected component is the LM358 opamp with the DIP8 package.
CHAPTERS
00:00 - Introduction
00:24 - 4 Methods of importing the component libraries in your PCB project
01:10 - How to design a Schematic symbol in Altium Designer
11:17 - How to design a PCB Footprint in Altium Designer
18:04 - How to add an external 3D model to the PCB footprint
20:30 - How to compile the integrated library and use the pre-build library
Music by Atch
SoundCloud: https://bit.ly/AtchSoundCloud
Spotify: https://bit.ly/AtchSpotify
Instagram: https://instagram.com/atchmusic How to Design the Component Libraries in Altium Designer [Beginners Tutorial]](https://i.ytimg.com/vi/J_pZdNdJaAs/mqdefault.jpg)







