Uploaded February 2026 | Updated September 2026, 15 hours ago
The HUD in the vid is purposely set for higher speed output, the beeping in background is the speed alarm set at around 38 kmh to warn I am approaching 40 kmh.
The HUD in the vid is purposely set for higher speed output, the beeping in background is the speed alarm set at around 38 kmh to warn I am approaching 40 kmh.
![(DIY) [Australia] MPPT Hybrid charge controller Results from MPPT start set at 12v](https://i.ytimg.com/vi/rlN81IA9Lx8/mqdefault.jpg "(DIY) [Australia] MPPT Hybrid charge controller Results from MPPT start set at 12v
[view in full screen in 720p HD if able or 480p resolution]
Like i wrote before, the turbine and charger behave similar to a car alternator and it voltage regulator through the magnet spindle to produce charge.
voltage builds as much as possible and may have some type of regulator feed to assist the magnetic rotor spindle to induce in the stator windings. When voltage is above battery level and rotation is constant, the amperage fed back is high, if it is only recent at the required voltage then current fed back is minimal.
Wind has been blowing less pulsing and less gusting, although it effectively never reached more than 4 m/s in the 5 days i had the turbine in place.")
