Uploaded October 2026 | Updated November 2026, 7 hours ago
21 days to Raceweek 2026 and our Big Block 64 Chevelle has NO MOTOR in it. Parts are still on the way with a mountain of work ahead — can we thrash it together in time for a week of drag racing and 1000+ miles of street driving?
This is the final push for RMRW 2.0. Starting 21 days out, we go down to the wire to get Paige's 1964 Chevelle ready for drag-and-drive. We install our custom Circle D torque converter with billet housing and billet stator with lockup, wire-up the TCI EZ-TCU controller to operate our new TCI 4L80E 6X 6-speed transmission, finish the install of the Proform brushless fans and controller for cooling, and install a TPS on our carburetor with the kit by Innovate Motorsports for clean trans control.
Then the payoff — we get the first road miles on the freshly spiced up 460ci big block chevy with a Comp 274H hydraulic flat tappet cam breathing through old school 781 oval port heads. From empty engine bay to test driving a classic cars chevelle muscle car build, this is old-fashioned hot rodding — low budget, questionable methods, high stakes.
If you're into torque converter tech, transmission swaps, tci 6X overdrive, radiator fan upgrades, throttle position sensor setup on a carb, and real-world Big Block Chevy thrash to make Raceweek 2026, this one's for you guys.
Subscribe for the Road to Raceweek 2.0 — we still need test miles before we haul out.
#Raceweek2026 #64Chevelle #DragAndDrive
21 days to Raceweek 2026 and our Big Block 64 Chevelle has NO MOTOR in it. Parts are still on the way with a mountain of work ahead — can we thrash it together in time for a week of drag racing and 1000+ miles of street driving?
This is the final push for RMRW 2.0. Starting 21 days out, we go down to the wire to get Paige's 1964 Chevelle ready for drag-and-drive. We install our custom Circle D torque converter with billet housing and billet stator with lockup, wire-up the TCI EZ-TCU controller to operate our new TCI 4L80E 6X 6-speed transmission, finish the install of the Proform brushless fans and controller for cooling, and install a TPS on our carburetor with the kit by Innovate Motorsports for clean trans control.
Then the payoff — we get the first road miles on the freshly spiced up 460ci big block chevy with a Comp 274H hydraulic flat tappet cam breathing through old school 781 oval port heads. From empty engine bay to test driving a classic cars chevelle muscle car build, this is old-fashioned hot rodding — low budget, questionable methods, high stakes.
If you're into torque converter tech, transmission swaps, tci 6X overdrive, radiator fan upgrades, throttle position sensor setup on a carb, and real-world Big Block Chevy thrash to make Raceweek 2026, this one's for you guys.
Subscribe for the Road to Raceweek 2.0 — we still need test miles before we haul out.
#Raceweek2026 #64Chevelle #DragAndDrive










