Uploaded April 2025 | Updated November 2026, 2 days ago
DIY Ultrasonic Range Finder with RP2040-Zero & LVGL GUI
======================================
Altium Designer + Altium-365 (Free): altium.com/yt/MyVanitar
======================================
Article: embedded.com/ultrasonic-range-finder-with-rp2040-zero-lvgl-gui
======================================
Schematic/PCB/Gerber/Code: 365.altium.com/files/59630CE0-2343-443F-AA18-09905AEB1FC8
======================================
Other Videos: bit.ly/2N9OlPa
======================================
@AtiumOfficial
#altiumstories
🚀 Learn how to build a professional Ultrasonic Range Finder using the RP2040-Zero (Raspberry Pi Pico), a 3.2-inch TFT display, and the RCWL-1655 sensor (compatible with HC-SR04 and other similar modules too, with ECHO and TRIG Pins)! Perfect for DIY enthusiasts, robotics projects, or IoT applications!
📌 What You’ll Learn:
âś… Circuit Design With RP2040-Zero, TFT Display & Ultrasonic Sensor
âś… Explanation of the Schematic, PCB & Design Tips
âś… Adapting the Hardware for Similar Ultrasonic Modules
#RP2040 #UltrasonicSensor #DIYEelectronics
DIY Ultrasonic Range Finder with RP2040-Zero & LVGL GUI
======================================
Altium Designer + Altium-365 (Free): altium.com/yt/MyVanitar
======================================
Article: embedded.com/ultrasonic-range-finder-with-rp2040-zero-lvgl-gui
======================================
Schematic/PCB/Gerber/Code: 365.altium.com/files/59630CE0-2343-443F-AA18-09905AEB1FC8
======================================
Other Videos: bit.ly/2N9OlPa
======================================
@AtiumOfficial
#altiumstories
🚀 Learn how to build a professional Ultrasonic Range Finder using the RP2040-Zero (Raspberry Pi Pico), a 3.2-inch TFT display, and the RCWL-1655 sensor (compatible with HC-SR04 and other similar modules too, with ECHO and TRIG Pins)! Perfect for DIY enthusiasts, robotics projects, or IoT applications!
📌 What You’ll Learn:
âś… Circuit Design With RP2040-Zero, TFT Display & Ultrasonic Sensor
âś… Explanation of the Schematic, PCB & Design Tips
âś… Adapting the Hardware for Similar Ultrasonic Modules
#RP2040 #UltrasonicSensor #DIYEelectronics



![How to Design the Component Libraries in Altium Designer [Beginners Tutorial]
How to Design the Component Libraries in Altium Designer [From Scratch]
Altium Designer + License (Free): https://www.altium.com/yt/myvanitar
In this video, you will learn (Altium Designer beginners tutorial) how to design/create a schematic symbol and a PCB footprint (a component library) in Altium designer and attach a 3D model to the footprint. Basically, you will create an integrated library and then you will add a schematic symbol and the PCB footprint. Then you are ready to compile the library and use it. My selected component is the LM358 opamp with the DIP8 package.
CHAPTERS
00:00 - Introduction
00:24 - 4 Methods of importing the component libraries in your PCB project
01:10 - How to design a Schematic symbol in Altium Designer
11:17 - How to design a PCB Footprint in Altium Designer
18:04 - How to add an external 3D model to the PCB footprint
20:30 - How to compile the integrated library and use the pre-build library
Music by Atch
SoundCloud: https://bit.ly/AtchSoundCloud
Spotify: https://bit.ly/AtchSpotify
Instagram: https://instagram.com/atchmusic How to Design the Component Libraries in Altium Designer [Beginners Tutorial]](https://i.ytimg.com/vi/J_pZdNdJaAs/mqdefault.jpg)






