Uploaded October 2023 | Updated September 2026, 2 days ago
After shoveling the dirt away to uncover our septic tank lids in order to have the tank pumped out, I decided I did not want to do that again. After a lot of research, I decided to go with the Polylok Tank Riser kit. I purchased mine from septicsolutions.com but I am including the Amazon link to a similar Polylok tank riser kit below
Polylok 24" Septic Tank Riser Kit (14" Tall) https://a.co/d/3hrkfLR
The one main suggestion I have would be to locate the designated area in the base for the anchor and drill through the base into the concrete and install the anchor through the base. This method worked great for me and was much easier than installing the anchors and then trying to fit each hole in the base over an anchor.
Other tools used for this project
Ryobi ONE+ 18V Cordless 1/4 in. Impact Driver Kit with 1.5 Ah Battery and Charger (P235AK1) https://a.co/d/2bLrID2
RYOBI ONE+ 18V Cordless 1/2 in. Drill/Driver (Tool Only) PCL206B Black Green https://a.co/d/81O0r0M
Stanley 33-281 Leverlock Fractional Tape Rule with Magnetic Tip, 1-Inch X 25-Feet https://a.co/d/giclJr8
CRAFTSMAN Socket Set, 1/4-Inch & 3/8-Inch Drive, Standard and Metric, 105 Pieces (CMMT12023) https://a.co/d/1dmNaI9
LEXIVON Impact Grade Socket Adapter Set, 3" Extension Bit With Holder | 3-Piece 1/4", 3/8", and 1/2" Drive, Adapt Your Power Drill To High Torque Impact Wrench (LX-101) https://a.co/d/f1klGkA
After shoveling the dirt away to uncover our septic tank lids in order to have the tank pumped out, I decided I did not want to do that again. After a lot of research, I decided to go with the Polylok Tank Riser kit. I purchased mine from septicsolutions.com but I am including the Amazon link to a similar Polylok tank riser kit below
Polylok 24" Septic Tank Riser Kit (14" Tall) https://a.co/d/3hrkfLR
The one main suggestion I have would be to locate the designated area in the base for the anchor and drill through the base into the concrete and install the anchor through the base. This method worked great for me and was much easier than installing the anchors and then trying to fit each hole in the base over an anchor.
Other tools used for this project
Ryobi ONE+ 18V Cordless 1/4 in. Impact Driver Kit with 1.5 Ah Battery and Charger (P235AK1) https://a.co/d/2bLrID2
RYOBI ONE+ 18V Cordless 1/2 in. Drill/Driver (Tool Only) PCL206B Black Green https://a.co/d/81O0r0M
Stanley 33-281 Leverlock Fractional Tape Rule with Magnetic Tip, 1-Inch X 25-Feet https://a.co/d/giclJr8
CRAFTSMAN Socket Set, 1/4-Inch & 3/8-Inch Drive, Standard and Metric, 105 Pieces (CMMT12023) https://a.co/d/1dmNaI9
LEXIVON Impact Grade Socket Adapter Set, 3" Extension Bit With Holder | 3-Piece 1/4", 3/8", and 1/2" Drive, Adapt Your Power Drill To High Torque Impact Wrench (LX-101) https://a.co/d/f1klGkA
