Uploaded July 2026 | Updated November 2026, 1 day ago
DIY Safe USB Passkey Circuit
======================================
Altium Develop (Free Legal License): altium.com/yt/MyVanitar
======================================
Schematic & PCB: 365.altium.com/files/60DA24B3-FD3C-4BFE-89CA-700E8491FD3D
======================================
Other Videos: bit.ly/2N9OlPa
======================================
@AtiumOfficial
#altiumstories
The market is filled with many USB PassKey (hardware key) products. But can you really trust them and connect any to your workplace computer or any computer that might contain sensitive data? The answer is no. You know electronics and how to build a device yourself, so why not build one for yourself?
That way, you know exactly how it works and can program the passkey yourself. In the end, you can be confident that your device does not contain any hidden or malicious code running in the background.
In this video, I use my modified Digispark board to design a custom USB passkey PCB. The CAD software used is Altium Develop (Altium Designer Develop), and I demonstrate several useful design techniques for creating a high-quality Schematic and PCB layout.
The initial setup—including flashing the bootloader, configuring the Digispark board in the Arduino IDE, and setting the fuse bits—was covered in the previous video. Those steps are identical for this design.
DIY Safe USB Passkey Circuit
======================================
Altium Develop (Free Legal License): altium.com/yt/MyVanitar
======================================
Schematic & PCB: 365.altium.com/files/60DA24B3-FD3C-4BFE-89CA-700E8491FD3D
======================================
Other Videos: bit.ly/2N9OlPa
======================================
@AtiumOfficial
#altiumstories
The market is filled with many USB PassKey (hardware key) products. But can you really trust them and connect any to your workplace computer or any computer that might contain sensitive data? The answer is no. You know electronics and how to build a device yourself, so why not build one for yourself?
That way, you know exactly how it works and can program the passkey yourself. In the end, you can be confident that your device does not contain any hidden or malicious code running in the background.
In this video, I use my modified Digispark board to design a custom USB passkey PCB. The CAD software used is Altium Develop (Altium Designer Develop), and I demonstrate several useful design techniques for creating a high-quality Schematic and PCB layout.
The initial setup—including flashing the bootloader, configuring the Digispark board in the Arduino IDE, and setting the fuse bits—was covered in the previous video. Those steps are identical for this design.
![12V Flyback DC-DC Converter Circuit Using UCC28881
12V Flyback DC-DC Converter Circuit Using UCC28881 | Wide Input Range (70V–230V) | Design, PCB & Test Results
Altium Develop (Free Legal License): https://www.altium.com/yt/MyVanitar
Article:
Schematic & PCB: https://365.altium.com/files/9AE78C4D-C20F-4442-BF5C-AF20FD354121
Other Videos: http://bit.ly/2N9OlPa
@AtiumOfficial
#altiumstories
This video walks through the complete design, layout, and testing of a non-isolated flyback DC-DC converter built around the Texas Instruments UCC28881 controller. I designed the schematic and PCB using Altium Develop.
You’ll learn how to design a 12V output converter that operates from a 70V to 230V DC input, with a continuous output current of up to 400mA. This project covers every design detail—from schematic explanations, snubber network, and PCB layout best practices to transformer winding and real-world lab testing.
It’s a great reference for power electronics hobbyists, SMPS designers, and engineers looking to understand DC-DC converters built around integrated high-voltage controllers.
Topics covered:
UCC28881 architecture and key features
Full schematic explanation
PCB layout tips for low EMI and high stability
RCD snubber design for MOSFET protection
Transformer design and placement
Bench testing and oscilloscope waveforms
📘 Resources, Tools, and Instruments Used:
Texas Instruments UCC28881 Datasheet: [TI Official Website]
Siglent SDS1104X-E oscilloscope
Altium Develop Software
Siglent SDL1020X-E DC Load
Siglent SDM3045X Multimeter
Variable AC Transformer (Variac)
🔔 Subscribe for more electronics design and PCB layout tutorials! 12V Flyback DC-DC Converter Circuit Using UCC28881](https://i.ytimg.com/vi/3G_nNjnJmqE/mqdefault.jpg)


![Differential Signal Measurement Using A Digital Oscilloscope [ADSL2+]
Differential Signal Measurement Using A Digital Oscilloscope [Examining the ADSL2+]
in this video, you gonna learn to how to measure differential signals using an oscilloscope. You can apply this method to examine other differential signals as well.
Article source: http://bit.ly/2Z7sDTt
Support me on Patreon: https://www.patreon.com/myvanitar
Check other videos: http://bit.ly/2N9OlPa
Single-Ended Transmission
Single-ended signaling is a simple and common way of transmitting electrical signals from a sender to a receiver. The signal is ground referenced (0 Volt) and one conductor (wire) carries the signal and one conductor carries the common reference potential. The current associated with the signal travels from sender to receiver and returns to the power supply through the shared ground connection. If multiple signals are transmitted, the carrier requires one wire for each transmission line plus one shared ground reference. Figure-1 shows the single-ended signaling topology.
Differential Signaling
Differential transmission is less common than single-ended transmission. It uses two transmission lines which sometimes accompanies with a third reference (ground) line. One transmission line of the differential pair is used to carry the signal and another line is used to carry the inverted signal. The receiver extracts the information by calculating the potential difference between the inverted and non-inverted signals. Both inverted and non-inverted signals are balanced, it means they carry the same potential, but with opposite polarity. By this strategy, the majority of the induced external noise on the transmission lines will be subtracted and canceled on the receiver side.
With differential signaling, the sender and receiver dont necessarily share a common ground reference. However, the use of differential signaling does not mean that using a ground reference has no positive effect on the line quality. When several transmission lines are used, it is absolutely beneficial to use a ground reference, in accompany with a pair for each differential signal. Figure-2 shows the differential signaling topology.
#differential_signal_measurement Differential Signal Measurement Using A Digital Oscilloscope [ADSL2+]](https://i.ytimg.com/vi/4SYRt3eMn8k/mqdefault.jpg)

![H Bridge DC Motor Driver/Control Circuit [40A PWM, Power MOSFETs]
H Bridge DC Motor Driver Circuit/Control [40A PWM, Power Mosfets] using IR2104 Mosfet Driver and IRF3205
Altium Designer + License (Free): https://www.altium.com/yt/myvanitar
Article: https://www.pcbway.com/blog/technology/Powerful_H_Bridge_DC_Motor_Driver.html
Check other videos: http://bit.ly/2N9OlPa
An H-Bridge (Full-Bridge) driver is quite popular in driving loads such as brushed DC motors and it is widely used in robotics and industry. The main advantages of using an H-Bridge driver are high efficiency, rotation direction change, and breaking the motor. In this article/video, I have introduced a complete H-Bridge DC motor driver using four IR3205 power MOSFETs and two IR2104 MOSFET drivers. Theoretically, the above-mentioned MOSFET can handle currents up to 80A, however, in practice we can expect to get currents up to 40A if the MOSFET temperature is kept as low as possible, using a big heatsink or even a fan.
Inspired by: DroneBot Workshop, Controlling DC Motors with the L298N H Bridge and Arduino, URL: https://youtu.be/dyjo_ggEtVU
Inspired by: ElectroBOOM, Brushed DC Motors and How to Drive Them, URL: https://youtu.be/yO9xIVv8ryc
Inspired by: Circuit Magic, How to control DC motor with L298N driver and Arduino, URL: https://youtu.be/dyZolgNOomk H Bridge DC Motor Driver/Control Circuit [40A PWM, Power MOSFETs]](https://i.ytimg.com/vi/4cxWFa4kg_o/mqdefault.jpg)




