Uploaded March 2025 | Updated September 2026, 3 hours ago
π Learn How to Make Concrete for Mold pouring. Fast-Curing mixture Recipe β go.lao2lab.com/You/concrete-guide
Modified Concrete Formula β 8 ingredients and their detailed description:
βοΈ Fast curing time (demolding after an hour)
βοΈ Ultra-strong, reinforced, and weighty
βοΈ Smooth, non-scratchable surface
βοΈ Water-resistant, non-toxic, and eco-friendly
βοΈ Pure white color + saturated tones
π‘ 3D-printing STL files to create your own silicone mold for x3 Tealight candles. One mold for 3 Π‘andles β go.lao2lab.com/You/Tealight-mold
This is the easiest way to start your silicone molds!
I Made a design of the most practical and simple mold for creating Tea-light candles β it requires a minimum of silicone (190 ml/6.5 oz) and only 35 grams of PLA to print the formwork!
My designs are not only modeled but also tested in real life β I am experimenting with the optimal sizes and shapes for printing and pouring.
You can make your own silicone mold by printing the master model and frame on your 3D printer using PLA.
Dimensions:
Diameter β 55mm
Height β 25mm
Walls β 4 mm
Volume β 30 ml (7 hours of soy wax burning)
Silicone required β 190 ml (6.5 oz)
PLA plastic for formwork β 35 g
π Learn How to Make Concrete for Mold pouring. Fast-Curing mixture Recipe β go.lao2lab.com/You/concrete-guide
Modified Concrete Formula β 8 ingredients and their detailed description:
βοΈ Fast curing time (demolding after an hour)
βοΈ Ultra-strong, reinforced, and weighty
βοΈ Smooth, non-scratchable surface
βοΈ Water-resistant, non-toxic, and eco-friendly
βοΈ Pure white color + saturated tones
π‘ 3D-printing STL files to create your own silicone mold for x3 Tealight candles. One mold for 3 Π‘andles β go.lao2lab.com/You/Tealight-mold
This is the easiest way to start your silicone molds!
I Made a design of the most practical and simple mold for creating Tea-light candles β it requires a minimum of silicone (190 ml/6.5 oz) and only 35 grams of PLA to print the formwork!
My designs are not only modeled but also tested in real life β I am experimenting with the optimal sizes and shapes for printing and pouring.
You can make your own silicone mold by printing the master model and frame on your 3D printer using PLA.
Dimensions:
Diameter β 55mm
Height β 25mm
Walls β 4 mm
Volume β 30 ml (7 hours of soy wax burning)
Silicone required β 190 ml (6.5 oz)
PLA plastic for formwork β 35 g
