DIY board for storage charging and discharging BT2.0 and PH2.0 1S LiPo batteries - QUICK GUIDE @muteFPV
DIY board for storage charging and discharging BT2.0 and PH2.0 1S LiPo batteries - QUICK GUIDE  @muteFPV
Uploaded February 2020 | Updated September 2026, 2 weeks ago
πŸ‘ If you LIKE what you see and want to SUPPORT the channel, you can join my PATREON mutefpv.com/patreon or tip my 'piggy bank' via PAYPAL mutefpv.com/paypal
----
πŸ”Ά You can also use the following affiliate links and BOOKMARK the links at the end of this description - I get a small kickback if you decide to buy something and it costs NOTHING extra to you.
----
πŸ”” SUBSCRIBE for more unique content! mutefpv.com/subscribe
_________

Just to be clear: this is not a simple series-charging thingy. You can scale it up to 8S and charge / discharge / storage charge any number of 1S batteries in between, just by plugging the loose PH2.0 connector to the next free PH2.0 slot. Mine works from 1S to 5S. The reasons why I went for 5S, connected in series, are in the video.

If necessary, you can also mix PH2.0 and BT2.0 packs, or even populate all the slots (in my case five pairs of 2x 1S in parallel) but in this case you need to make sure that starting voltage and capacity must be the same for all packs. In general, when connecting cells in series, the capacity needs to be the same.

If you already have series charging boards or harnesses, you could make a similar XT60 to XT60 adapter with a loose cable for the (+) side and use it in a similar way.

Let me know how it goes if you make one!


πŸ‘‰ PCB strip board:
mutefpv.com/mlclj (BG)
geni.us/hC3b7lw (paid link to Amazon)
mutefpv.com/p64tt (EB)
mutefpv.com/g0z5p (AE)

πŸ‘‰ PCB double sided:
mutefpv.com/z5eii (BG)
mutefpv.com/yipdr (EB)
mutefpv.com/ui7oc (AE)
mutefpv.com/71x1n (AE)
mutefpv.com/h5kar (AE)

πŸ‘‰ PCB single sided:
mutefpv.com/w3eq3 (EB)
mutefpv.com/t2oz2 (AE)
mutefpv.com/nb17q (AE)

πŸ‘‰ TS100 soldering iron:
mutefpv.com/wnyz1 (BG)
mutefpv.com/mgrxt (GET)
geni.us/RZtfJh6 (paid link to Amazon)
mutefpv.com/mb7gm (EB)
mutefpv.com/32ngc (AE)

πŸ‘‰ TS-D24 tip:
mutefpv.com/9kuos (BG)
mutefpv.com/8xyi1 (GET)
geni.us/dD7HX (paid link to Amazon)
mutefpv.com/onh6u (EB)
mutefpv.com/et56t (AE)

My favorite TS100 accessories: mutefpv.com/h5xhn (YT)

πŸ‘‰ Adhesive vinyl:
mutefpv.com/fww8i (BG)
mutefpv.com/k6x4t (EB)
mutefpv.com/ut68k (AE)

πŸ‘‰ XT60 (black):
mutefpv.com/vadz1 (BG)
mutefpv.com/wb25j (EB)
mutefpv.com/g32bt (GET)
mutefpv.com/7unkg (AE)
mutefpv.com/ud10a (AE)

πŸ‘‰ 3x1S to 6x1S charging harness (I cannot find mine, some may need mods):
mutefpv.com/ub0tg (BG)
mutefpv.com/bzpgt (BG)
mutefpv.com/ro8bq (BG)
mutefpv.com/782ne (BG)
mutefpv.com/8mkwm (Makerfire)

πŸ‘‰ BT2.0 connectors:
mutefpv.com/r4j0c (BF)
mutefpv.com/ppdhz (GET)
geni.us/KAQbUBo (paid link to Amazon)
mutefpv.com/dgly9 (AE)
mutefpv.com/bbtpy (GET)
mutefpv.com/x25aa (BF)

πŸ‘‰ PH2.0 pre-crimped cable:
mutefpv.com/kcb2x (BG)
mutefpv.com/8222r (BG)
mutefpv.com/y8tz2 (EB)
mutefpv.com/zrf9b (AE)
mutefpv.com/e81qt (AE)

πŸ‘‰ Balance connector (up to 8S):
mutefpv.com/5xyyf (BG)
mutefpv.com/lcnlg (BG)
mutefpv.com/qu0vc (EB)
mutefpv.com/wrlet (HK)
mutefpv.com/avjka (GET)
mutefpv.com/swv4s (AE)

πŸ‘‰ PH2.0 connectors & crimps:
mutefpv.com/38t0v (BG)
mutefpv.com/12oer (EB)
mutefpv.com/bueg9 (AE)
mutefpv.com/6i4gw (AE)

πŸ‘‰ Open barrel crimping tool:
mutefpv.com/wxmg1 (EB)
geni.us/59pG (paid link to Amazon)

πŸ‘‰ Automatic wire stripper:
mutefpv.com/rbq1l (BG)
geni.us/LTzb1A (paid link to Amazon)
mutefpv.com/mqyyf (EB)

My favorite FPV tools: mutefpv.com/9gvrs (YT)

How to crimp PH2.0 connectors: mutefpv.com/8yf7r (YT)


Legend:
AE = AliExpress
BF = BetaFPV
BG = Banggood
EB = Ebay
GB = Gearbest
GET = GetFPV
HK = HobbyKing
YT = Youtube



πŸ‘ πŸ‘ πŸ‘ PLEASE SUPPORT the MuteFPV channel:
-------
πŸ‘ You can tip my 'piggy bank' via PAYPAL, here: mutefpv.com/paypal

πŸ‘ You can also save and use these convenient BOOKMARKS before purchasing new goodies (please bookmark the SHORTLINKS in your browser):
BANGGOOD: mutefpv.com/banggood
AMAZON (paid link): mutefpv.com/amazon
GETFPV: mutefpv.com/getfpv
EBAY: mutefpv.com/ebay
ALIEXPRESS: mutefpv.com/aliexpress
HELINATION: mutefpv.com/helination
HOBBYKING: mutefpv.com/hobbyking
HORUSRC: mutefpv.com/horusrc
GEARBEST: mutefpv.com/gearbest

πŸ‘ πŸ‘ πŸ‘ THANK YOU in advance for your support!


(As an Amazon Associate I earn from qualifying purchases.)


-------
Music: " Le Chat Noir " by Lucas Pittman
You can find the track on Epidemic sounds: mutefpv.com/epidemic



#muteFPV
#storage1S
#discharge1S
DIY board for storage charging and discharging BT2.0 and PH2.0 1S LiPo batteries - QUICK GUIDECinewhoop propellers comparison: Gemfan vs HQprop vs HSKRC (feat. iFlight Megabee V2.1)Cheap and USEFUL gadgets for FPVISDT Q6 Nano cheap & reliable LiPo battery chargerFolding props for FPV drones : DALprop Fold F5 vs Gemfan Floppy Proppy F5135Use any* DC LiPo charger as a simple battery cell checker - EASY FIXRCinPower GTS V3 2107plus 2480KV FPV motors on 4S (feat. Azure HQprop Gemfan Ethix Tmotor)Tinyhawk case insert organizer for the Emax Tinyhawk I, Tinyhawk 2 and Tinyhawk S - Useful 3D PrintsFoxeer Predator V2 Mini & Micro: Overview & Comparison with version 1 - BEST FOR LESSTwo Trees magnetic PEI coated Spring Steel 3D print bed surface vs Creality Cmagnet flexible surfaceEachine US65 UK65 brushless 1S tiny whoop alternative - BNF TESTINGBUILD THIS QUAD: Five33 Tiny Trainer step-by-step Build Guide & Flights (micro FPV racing)
muteFPV |

DIY board for storage charging and discharging BT2.0 and PH2.0 1S LiPo batteries - QUICK GUIDE

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER