Uploaded November 2020 | Updated September 2026, 2 hours ago
Second gen Tacomas always have this issue! The resistor goes bad and the blower motor only works on the highest setting. This is an easy way to fix it and only costs about $20 to fix. I chose to solder the connections, but you can use the wire crimps provided in the replacement if you prefer. Comment below if you have any questions. Links to everything I used below!
Come hang out with me here too!
Instagram: instagram.com/braxenmcconnell
Facebook: facebook.com/Braxen-McConnell-1717711761619453/?ref=bookmarks
Twitter: twitter.com/BraxenMcConnell
TikTok: tiktok.com/@braxenmcconnell?lang=en
Link to the Resistor:
amzn.to/3pDNQhh
Link to Soldering Iron:
amzn.to/2HaImt0
Socket Kit:
amzn.to/2UFFRBW
Main Camera: amzn.to/3aXgUbD
Main Lens (Fav): amzn.to/38OhaIl
Favorite Drone: amzn.to/2vgAuQH
My 2nd Fav Drone: amzn.to/39OVcWO
Gorillapod that holds my main camera: amzn.to/2IKEITX
Cheaper Joby Gorilla pod: amzn.to/33pr7uV
My smaller camera: amzn.to/2TJqRDE
Second gen Tacomas always have this issue! The resistor goes bad and the blower motor only works on the highest setting. This is an easy way to fix it and only costs about $20 to fix. I chose to solder the connections, but you can use the wire crimps provided in the replacement if you prefer. Comment below if you have any questions. Links to everything I used below!
Come hang out with me here too!
Instagram: instagram.com/braxenmcconnell
Facebook: facebook.com/Braxen-McConnell-1717711761619453/?ref=bookmarks
Twitter: twitter.com/BraxenMcConnell
TikTok: tiktok.com/@braxenmcconnell?lang=en
Link to the Resistor:
amzn.to/3pDNQhh
Link to Soldering Iron:
amzn.to/2HaImt0
Socket Kit:
amzn.to/2UFFRBW
Main Camera: amzn.to/3aXgUbD
Main Lens (Fav): amzn.to/38OhaIl
Favorite Drone: amzn.to/2vgAuQH
My 2nd Fav Drone: amzn.to/39OVcWO
Gorillapod that holds my main camera: amzn.to/2IKEITX
Cheaper Joby Gorilla pod: amzn.to/33pr7uV
My smaller camera: amzn.to/2TJqRDE
