Uploaded December 2024 | Updated November 2026, 6 days ago
This video demonstrates how to create a web-enabled digital photo frame with Curiosity PIC32MZ EF or PIC32MZ DA MCUs using MPLAB® Harmony and MCC. The application uses the Legato Graphics library to display images from an SD Card to a WQVGA display and the TCP/IP Stack to enable a web server to show images in a web browser.
Links:
Curiosity PIC32MZ EF 2.0 Development Board page
microchip.com/en-us/development-tool/dm320209z
· PIC32MZ DA CURIOSITY DEVELOPMENT KIT
microchip.com/en-us/development-tool/ev87d54a
· SSD1963 LCD CONTROLLER GRAPHICS CARD
microchip.com/en-us/development-tool/AC320214
· HIGH-PERFORMANCE 4.3" WQVGA DISPLAY MODULE WITH MAXTOUCH® TECHNOLOGY | Microchip Technology
microchip.com/en-us/development-tool/ac320213
· 24-BIT pass through Graphics Card (AC320213)
microchip.com/en-us/development-tool/ac320213
· AC320004-6 - KSZ8061 PHY DAUGHTER BOARD
microchip.com/en-us/development-tool/AC320004-6
· microSD Click from Mikro (MIKROE-924)
mikroe.com/microsd-click
· USB I2C Click from Mikro (MIKROE-1985)
mikroe.com/usb-i2c-click
· Demo linked in “Software” section:
microchip.com/en-us/development-tool/ev87d54a
· GitHub Reference Apps Demo:
github.com/Microchip-MPLAB-Harmony/reference_apps/tree/master/apps/pic32mz_ef_curiosity_v2/pic32mzef_web_photo_frame
· MPLAB Discover:
mplab-discover.microchip.com/v2?dsl=PIC32CK+AND+SG
· How to Set up the Tools Required to Get Started with MPLAB® Harmony v3 and MCC
youtube.com/watch?v=0rNFSlsVwVw&t=1s
Timestamps:
0:00 – Introduction
0:12 – Prerequisite - Hardware
0:50 – Prerequisite - Software
1:10 – Project Scope
1:15 – Application Block Diagram
1:19 – Project Scope and Steps
1:51 – Step 1: Setup the Hardware
2:23 – Step 2: Download the project from the kit page
2:36 – Step 3: Open the project and launch MCC
2:48 – Step 4: Check the peripheral configurations in MCC
3:58 – Step 5: Compile the project and see the Output
5:07 – More application demos on Curiosity PIC32MZ EF 2.0 Development Board
5:22 – More information on MPLAB® Harmony
This video demonstrates how to create a web-enabled digital photo frame with Curiosity PIC32MZ EF or PIC32MZ DA MCUs using MPLAB® Harmony and MCC. The application uses the Legato Graphics library to display images from an SD Card to a WQVGA display and the TCP/IP Stack to enable a web server to show images in a web browser.
Links:
Curiosity PIC32MZ EF 2.0 Development Board page
microchip.com/en-us/development-tool/dm320209z
· PIC32MZ DA CURIOSITY DEVELOPMENT KIT
microchip.com/en-us/development-tool/ev87d54a
· SSD1963 LCD CONTROLLER GRAPHICS CARD
microchip.com/en-us/development-tool/AC320214
· HIGH-PERFORMANCE 4.3" WQVGA DISPLAY MODULE WITH MAXTOUCH® TECHNOLOGY | Microchip Technology
microchip.com/en-us/development-tool/ac320213
· 24-BIT pass through Graphics Card (AC320213)
microchip.com/en-us/development-tool/ac320213
· AC320004-6 - KSZ8061 PHY DAUGHTER BOARD
microchip.com/en-us/development-tool/AC320004-6
· microSD Click from Mikro (MIKROE-924)
mikroe.com/microsd-click
· USB I2C Click from Mikro (MIKROE-1985)
mikroe.com/usb-i2c-click
· Demo linked in “Software” section:
microchip.com/en-us/development-tool/ev87d54a
· GitHub Reference Apps Demo:
github.com/Microchip-MPLAB-Harmony/reference_apps/tree/master/apps/pic32mz_ef_curiosity_v2/pic32mzef_web_photo_frame
· MPLAB Discover:
mplab-discover.microchip.com/v2?dsl=PIC32CK+AND+SG
· How to Set up the Tools Required to Get Started with MPLAB® Harmony v3 and MCC
youtube.com/watch?v=0rNFSlsVwVw&t=1s
Timestamps:
0:00 – Introduction
0:12 – Prerequisite - Hardware
0:50 – Prerequisite - Software
1:10 – Project Scope
1:15 – Application Block Diagram
1:19 – Project Scope and Steps
1:51 – Step 1: Setup the Hardware
2:23 – Step 2: Download the project from the kit page
2:36 – Step 3: Open the project and launch MCC
2:48 – Step 4: Check the peripheral configurations in MCC
3:58 – Step 5: Compile the project and see the Output
5:07 – More application demos on Curiosity PIC32MZ EF 2.0 Development Board
5:22 – More information on MPLAB® Harmony










