Getting Started with the Real Time Clock (RTC) in PIC32CM Devices – Part 2: RTC Configuration @MicrochipDeveloperHelp
Getting Started with the Real Time Clock (RTC) in PIC32CM Devices – Part 2: RTC Configuration  @MicrochipDeveloperHelp
Uploaded March 2026 | Updated November 2026, 6 days ago
The Real-Time Clock (RTC) is a widely-used feature in embedded projects all over the electronics landscape. It provides a practical and precise timing solution for all systems. In this video, where we’ll get some hands-on experience in setting up and developing applications with the RTC peripheral on Microchip's PIC32CM devices using Microchip tools like MPLAB Tools in VSCODE, MCC Harmony, and the MPLAB AI Coding Assistant. If you haven't seen Part 1 about the RTC Basics and Operation, we recommend you watch that first at this link: youtube.com/watch?v=e7vWSg0VBRU
Getting Started with the Real Time Clock (RTC) in PIC32CM Devices – Part 2: RTC ConfigurationThe Secret to Controlling High-Speed BLDC Motors (130K RPM  Demo)Dev Tool Bits | Unlock CMSIS-DAP on MPLAB® PICkit™ Basic & Our MPLAB® Tools In Just 2 CommandsMPLAB® Harmony in VS Code®: Creating a new 100ms Timer ProjectMCC in VS Code®: Introduction to the Video SeriesRelationship Between TIE and Phase NoiseCreate Your First Project with SAMD21 Using MPLAB® Harmony v3 and MCCImplementing Capacitive Touch in Your 32-Bit Design | Peripheral Touch Controller Deep Dive (Part 2)Create Your First Project with PIC32MZ EF Using MPLAB® Harmony v3 and MCCEasy Communication with UART | Peripheral Deep Dive: UARTMCC Melody Timer0 PLIB Driver: 100 ms TimerInstallation of CMSIS-Driver Packs Using the Arm® Keil® Studio Pack (MDK v6) with PIC32CM PL10
Microchip Developer Help |

Getting Started with the Real Time Clock (RTC) in PIC32CM Devices – Part 2: RTC Configuration

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER