Create Your First Project with PIC32MZ EF Using MPLAB® Harmony v3 and MCC @MicrochipDeveloperHelp
Create Your First Project with PIC32MZ EF Using MPLAB® Harmony v3 and MCC  @MicrochipDeveloperHelp
Uploaded December 2024 | Updated November 2026, 6 days ago
This video will guide you through setting up and running a "Getting Started" application on the Curiosity PIC32MZ EF 2.0 Development Board using MPLAB Harmony v3 and MCC.

The application reads the current room temperature from a sensor on the I/O1 Xplained Pro Extension. Temperature data is displayed on the serial console every 500 milliseconds by default. Pressing the switch SW1 on the Curiosity board cycles through various update intervals (1, 2, and 4 seconds, then back to 500 milliseconds). LED1 toggles with each update.


Links:
· Curiosity PIC32MZ EF 2.0 Development Board
microchip.com/en-us/development-tool/dm320209

· Microchip’s Microcontrollers and Microprocessors Product Page
microchip.com/en-us/products/microcontrollers-and-microprocessors

· MPLAB Reference Apps GitHub
github.com/Microchip-MPLAB-Harmony/reference_apps

· Demo Used Guide:
onlinedocs.microchip.com/oxy/GUID-370F882E-0FF7-40A0-92E4-07483A0ABC80-en-US-1/GUID-901B2A39-990A-4E35-9C8B-7520EB98741C.html

· GitHub Link:
onlinedocs.microchip.com/oxy/GUID-370F882E-0FF7-40A0-92E4-07483A0ABC80-en-US-1/GUID-901B2A39-990A-4E35-9C8B-7520EB98741C.html

· How to Set up the Tools Required to Get Started with MPLAB® Harmony v3 and MCC
youtube.com/watch?v=0rNFSlsVwVw

Timestamps:
0:00 – Introduction
0:12 – Software Requirements
0:32 – Hardware Setup
0:51 – Project Scope and Steps
1:21 – Step 1: Hardware Setup
1:25 – Step 2: Download Project from Kit Page
1:37 – Step 3: Open Project and Launch MCC
1:51 – Step 4: Check the Peripheral Configurations in MCC
3:09 – Step 5: Compile Project and View Output
3:43 – More Project Demos on Curiosity PIC32MZ EF
3:56 – Learn More about MPLAB Harmony
Create Your First Project with PIC32MZ EF Using MPLAB® Harmony v3 and MCCEasy Communication with UART | Peripheral Deep Dive: UARTMCC Melody Timer0 PLIB Driver: 100 ms TimerInstallation of CMSIS-Driver Packs Using the Arm® Keil® Studio Pack (MDK v6) with PIC32CM PL10Downloading, Installing, and Activating MPLAB® XC CompilersBuilding Block Solutions Applications: Electrochemical Gas Sensing DemoTrustZone® Getting Started Application with PIC32CK SG Curiosity Ultra Development BoardHigh-Precision Analog Sensing Made Easy with the PIC32CM ADC (Part 2)How does an e-Scooter Traction Motor Control work?Getting Started with the MCP3221 SAR ADC Evaluation Board (EV55L49A)Dev Tool Bits | Creating VS Code profiles for MPLAB® ToolsAutonomous Navigation: Smart RC Car with Obstacle Avoidance using PIC32CZ CA90 MCU
Microchip Developer Help |

Create Your First Project with PIC32MZ EF Using MPLAB® Harmony v3 and MCC

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER