Uploaded September 2024 | Updated November 2026, 4 days ago
This video introduces the PIC32CK SG01 Curiosity Ultra Development Board using MPLAB Harmony and MCC. The project demonstrates TrustZone by separating Secure and Non-Secure applications.
This project highlights TrustZone's security isolation for embedded systems. The Secure application reads room temperature every 500 milliseconds from the I/O1 Xplained Pro Extension Kit, displaying it on a serial console and toggling an LED (LED0). The interval changes with each press of the SW0 switch.
Also, temperature readings are stored in EEPROM. The Non-Secure application requests and displays these readings, toggling a second LED (LED1) when accessing the EEPROM.
Links:
· PIC32CK SG01 Curiosity Ultra Development Board page:
microchip.com/en-us/development-tool/ea14v17a
· Microchip’s Microcontrollers and Microprocessors product page:
microchip.com/en-us/products/microcontrollers-and-microprocessors
· MPLAB Reference Apps GitHub:
github.com/Microchip-MPLAB-Harmony/reference_apps
· MPLAB Reference Apps Gitee:
gitee.com/Microchip-MPLAB-Harmony/reference_apps
· GitHub link for PIC32CK SG01 Curiosity Ultra Development Board:
· Link to Demo and user guide: Refer to “Software” section on Kit page
· microchip.com/en-us/development-tool/ev33a17a
· MPLAB® X IDE Essentials - 01: Installation and Ecosystem
youtube.com/watch?v=WSePR0jIeKI
· How to Set up the Tools Required to Get Started with MPLAB® Harmony v3 and MCC
youtube.com/watch?v=0rNFSlsVwVw
Timestamps:
0:00 – Introduction
0:13 – Prerequisite - Software
0:39 – Prerequisite - Hardware
1:14 – Project Scope and Steps
2:20 – Step 1: Application overview
5:21 – Step 2: Setup the hardware
5:25 – Step 3: Download the Demo Project
5:41 – Step 4: Open the project and launch MCC
5:48 – Step 6: Check the peripheral configurations in MCC
7:55 – Step 7: Review the Application Code
8:30 – Step 8: Compile the project and see the Output
9:14– More application demos on PIC32CK SG Curiosity Ultra Development Board
9:32 – More information on MPLAB Harmony
This video introduces the PIC32CK SG01 Curiosity Ultra Development Board using MPLAB Harmony and MCC. The project demonstrates TrustZone by separating Secure and Non-Secure applications.
This project highlights TrustZone's security isolation for embedded systems. The Secure application reads room temperature every 500 milliseconds from the I/O1 Xplained Pro Extension Kit, displaying it on a serial console and toggling an LED (LED0). The interval changes with each press of the SW0 switch.
Also, temperature readings are stored in EEPROM. The Non-Secure application requests and displays these readings, toggling a second LED (LED1) when accessing the EEPROM.
Links:
· PIC32CK SG01 Curiosity Ultra Development Board page:
microchip.com/en-us/development-tool/ea14v17a
· Microchip’s Microcontrollers and Microprocessors product page:
microchip.com/en-us/products/microcontrollers-and-microprocessors
· MPLAB Reference Apps GitHub:
github.com/Microchip-MPLAB-Harmony/reference_apps
· MPLAB Reference Apps Gitee:
gitee.com/Microchip-MPLAB-Harmony/reference_apps
· GitHub link for PIC32CK SG01 Curiosity Ultra Development Board:
· Link to Demo and user guide: Refer to “Software” section on Kit page
· microchip.com/en-us/development-tool/ev33a17a
· MPLAB® X IDE Essentials - 01: Installation and Ecosystem
youtube.com/watch?v=WSePR0jIeKI
· How to Set up the Tools Required to Get Started with MPLAB® Harmony v3 and MCC
youtube.com/watch?v=0rNFSlsVwVw
Timestamps:
0:00 – Introduction
0:13 – Prerequisite - Software
0:39 – Prerequisite - Hardware
1:14 – Project Scope and Steps
2:20 – Step 1: Application overview
5:21 – Step 2: Setup the hardware
5:25 – Step 3: Download the Demo Project
5:41 – Step 4: Open the project and launch MCC
5:48 – Step 6: Check the peripheral configurations in MCC
7:55 – Step 7: Review the Application Code
8:30 – Step 8: Compile the project and see the Output
9:14– More application demos on PIC32CK SG Curiosity Ultra Development Board
9:32 – More information on MPLAB Harmony










