Uploaded January 2026 | Updated November 2026, 13 hours ago
In this video, you will learn how to create your first MPU project using the MPLAB® extension for VS Code®.
• Installation Procedure: developerhelp.microchip.com/xwiki/bin/view/software-tools/ides/extensions/get-started
• SAM9X75 Curiosity Development board:
microchip.com/en-us/development-tool/ev31h43a
• Sample Application Project:
github.com/ReferenceAppsMPU/reference_apps_mpu/tree/main/apps/sam9x75_curiosity_dev_board/sam9x75_cu_mplab_vs_code_getting_started
• Bootstrap Binaries:
developerhelp.microchip.com/xwiki/bin/view/software-tools/32-bit-harmony-v3/sama7d65-curiosity-write-nand
• Post Build Command to build .bin from .elf: cmd.exe /C ""${MP_CC_DIR}/xc32-objcopy" -O binary %{TargetDirRelative}/%{ConfigurationName}.elf %{TargetDirRelative}/harmony.bin"
• Bootstrap Configurations to be added under User Variables: "properties": {
"boot.load_adr": "",
"boot.use": "true",
"boot.entry_adr": "",
"boot.path": "./binaries/at91bootstrap.elf ",
"boot.prj": ""
• Additional YouTube Videos: youtu.be/rNCBxSo60Cc?si=EDUjhbWCsRhsJBYd
0:00 - Introduction
0:08 - VS Code Installation
0:16 - Installing MPLAB extension for VS Code
0:28 - Hardware Prerequisite
0:40 - Hardware Setup
1:01 - Create a new MPLAb project
1:29 - Add MCC Content path
1:50 - MCC Launch
2:13 - Cloning the necessary MCC Content
2:56 - Project Graph Configuration
3:14 - Pin Configuration
3:30 - Clock Configuration
3:45 - Generating Code
3:56 - Add user application code
4:19 - Add Boot Configuration
4:34 - MPLAB Project Configuration
4:49 - Add Bootstrap Binaries to the project framework
4:55- QSPI jumper settings
5:18 - Build the project
5:13 - Debugging the project
5:41 - Additional Resources
In this video, you will learn how to create your first MPU project using the MPLAB® extension for VS Code®.
• Installation Procedure: developerhelp.microchip.com/xwiki/bin/view/software-tools/ides/extensions/get-started
• SAM9X75 Curiosity Development board:
microchip.com/en-us/development-tool/ev31h43a
• Sample Application Project:
github.com/ReferenceAppsMPU/reference_apps_mpu/tree/main/apps/sam9x75_curiosity_dev_board/sam9x75_cu_mplab_vs_code_getting_started
• Bootstrap Binaries:
developerhelp.microchip.com/xwiki/bin/view/software-tools/32-bit-harmony-v3/sama7d65-curiosity-write-nand
• Post Build Command to build .bin from .elf: cmd.exe /C ""${MP_CC_DIR}/xc32-objcopy" -O binary %{TargetDirRelative}/%{ConfigurationName}.elf %{TargetDirRelative}/harmony.bin"
• Bootstrap Configurations to be added under User Variables: "properties": {
"boot.load_adr": "",
"boot.use": "true",
"boot.entry_adr": "",
"boot.path": "./binaries/at91bootstrap.elf ",
"boot.prj": ""
• Additional YouTube Videos: youtu.be/rNCBxSo60Cc?si=EDUjhbWCsRhsJBYd
0:00 - Introduction
0:08 - VS Code Installation
0:16 - Installing MPLAB extension for VS Code
0:28 - Hardware Prerequisite
0:40 - Hardware Setup
1:01 - Create a new MPLAb project
1:29 - Add MCC Content path
1:50 - MCC Launch
2:13 - Cloning the necessary MCC Content
2:56 - Project Graph Configuration
3:14 - Pin Configuration
3:30 - Clock Configuration
3:45 - Generating Code
3:56 - Add user application code
4:19 - Add Boot Configuration
4:34 - MPLAB Project Configuration
4:49 - Add Bootstrap Binaries to the project framework
4:55- QSPI jumper settings
5:18 - Build the project
5:13 - Debugging the project
5:41 - Additional Resources










