Uploaded September 2024 | Updated November 2026, 15 minutes ago
This video introduces ARM Cortex M4 based SAM E54 Xplained Pro Evaluation Kit using MPLAB Code Configurator (MCC). The application reads room temperature from the I/O1 Xplained Pro Extension Kit every 500 milliseconds, displaying it on a serial console and toggling an LED. The sampling interval varies based on each press of the switch SW0. Additionally, the project showcases temperature data using I/O-1 Xplained pro evaluation kit.
Links:
· SAM E54 Xplained Pro Evaluation Kit page
microchip.com/en-us/development-tool/atsame54-xpro
· Microchip's Microcontrollers and Microprocessors product page
microchip.com/en-us/products/microcontrollers-and-microprocessors
· MPLAB Reference Apps GitHub
github.com/Microchip-MPLAB-Harmony/reference_apps
· MPLAB Reference Apps Gitee
gitee.com/Microchip-MPLAB-Harmony/reference_apps
·"Reference Applications for SAM MCU Family:
github.com/Microchip-MPLAB-Harmony/reference_apps_sam_mcu
· Demo Link:
github.com/Microchip-MPLAB-Harmony/reference_apps_sam_mcu/tree/master/apps/sam_e54_xpro/same54_getting_started
· Demo User Guide:
onlinedocs.microchip.com/oxy/GUID-CE82555C-559F-4226-A6DD-961D6B9737DE-en-US-1/GUID-571D07A4-23B1-46B2-974F-F1653CA601BD.html"
· MPLAB® X IDE Essentials - 01: Installation and Ecosystem
youtube.com/watch?v=WSePR0jIeKI
· How to Set up the Tools Required to Get Started with MPLAB® Harmony v3 and MCC
youtu.be/0rNFSlsVwVw
Timestamps:
0:00 – Introduction
0:13 – Prerequisite - Software
0:28 – Prerequisite - Hardware
0:50 – Project Scope and Steps
1:25 – Step 1: Setup the Hardware
1:29 – Step 2: Download the project from the kit page
1:43 – Step 3: Open the project and launch MCC
1:58 – Step 4: Check the peripheral configurations in MCC
2:57 – Step 5: Review Application Code
3:24 – Step 6: Compile the project and see the Output
4:12 – More application demos on SAM E54 Xplained Pro Evaluation Kit
4:25 – More information on MPLAB Harmony
This video introduces ARM Cortex M4 based SAM E54 Xplained Pro Evaluation Kit using MPLAB Code Configurator (MCC). The application reads room temperature from the I/O1 Xplained Pro Extension Kit every 500 milliseconds, displaying it on a serial console and toggling an LED. The sampling interval varies based on each press of the switch SW0. Additionally, the project showcases temperature data using I/O-1 Xplained pro evaluation kit.
Links:
· SAM E54 Xplained Pro Evaluation Kit page
microchip.com/en-us/development-tool/atsame54-xpro
· Microchip's Microcontrollers and Microprocessors product page
microchip.com/en-us/products/microcontrollers-and-microprocessors
· MPLAB Reference Apps GitHub
github.com/Microchip-MPLAB-Harmony/reference_apps
· MPLAB Reference Apps Gitee
gitee.com/Microchip-MPLAB-Harmony/reference_apps
·"Reference Applications for SAM MCU Family:
github.com/Microchip-MPLAB-Harmony/reference_apps_sam_mcu
· Demo Link:
github.com/Microchip-MPLAB-Harmony/reference_apps_sam_mcu/tree/master/apps/sam_e54_xpro/same54_getting_started
· Demo User Guide:
onlinedocs.microchip.com/oxy/GUID-CE82555C-559F-4226-A6DD-961D6B9737DE-en-US-1/GUID-571D07A4-23B1-46B2-974F-F1653CA601BD.html"
· MPLAB® X IDE Essentials - 01: Installation and Ecosystem
youtube.com/watch?v=WSePR0jIeKI
· How to Set up the Tools Required to Get Started with MPLAB® Harmony v3 and MCC
youtu.be/0rNFSlsVwVw
Timestamps:
0:00 – Introduction
0:13 – Prerequisite - Software
0:28 – Prerequisite - Hardware
0:50 – Project Scope and Steps
1:25 – Step 1: Setup the Hardware
1:29 – Step 2: Download the project from the kit page
1:43 – Step 3: Open the project and launch MCC
1:58 – Step 4: Check the peripheral configurations in MCC
2:57 – Step 5: Review Application Code
3:24 – Step 6: Compile the project and see the Output
4:12 – More application demos on SAM E54 Xplained Pro Evaluation Kit
4:25 – More information on MPLAB Harmony










![Calculating TIE Jitter
This video demonstrates how to measure TIE jitter using a phase noise analyzer; phase noise power spectral density is integrated over a frequency range to derive rms phase noise amplitude.
PLEASE NOTE: The formula for Power[dBm] beginning at 1:38 in brown font is missing a pair of parentheses. In addition to the existing parentheses already in the formula, 50Ω*1mW should have parentheses around it as well so that the formula is Power[dBm]= 10 log10(V^2/(50Ω*1mW)) Calculating TIE Jitter](https://i.ytimg.com/vi/j9B2jJs-9ew/mqdefault.jpg)