Uploaded September 2025 | Updated November 2026, 4 days ago
Getting Started Using MPLAB® Harmony in VS Code® (for PIC32C and SAM Development) Playlist:
youtube.com/playlist?list=PLtQdQmNK_0DTGNRV0qKkIEFn2fmrN0q31&si=K9Z9WB0hkz-LrlSh
Building on where we were at the end of the 100 ms Timer video, a SERCOM (Serial Communications Interface) peripheral is now added to the project, which can be configured as USART, SPI or I2C. Here the SERCOM is configured as a UART.
1. A low level, hardware specific function, is used to send "Hello World!", i.e., SERCOM1_USART_Write( ).
2. Then a STDIO binding is added, allowing standard printf, with a count variable.
3. Finally, a USART loopback is implemented, using the context help code snippet. In between, the MPLAB AI Coding Assistant is used, to lend a hand here and there.
In closing, the SYS_CONSOLE is introduced, which offers similar functionality.
Getting Started Using MPLAB® Harmony in VS Code® (for PIC32C and SAM Development) Playlist:
youtube.com/playlist?list=PLtQdQmNK_0DTGNRV0qKkIEFn2fmrN0q31&si=K9Z9WB0hkz-LrlSh
Building on where we were at the end of the 100 ms Timer video, a SERCOM (Serial Communications Interface) peripheral is now added to the project, which can be configured as USART, SPI or I2C. Here the SERCOM is configured as a UART.
1. A low level, hardware specific function, is used to send "Hello World!", i.e., SERCOM1_USART_Write( ).
2. Then a STDIO binding is added, allowing standard printf, with a count variable.
3. Finally, a USART loopback is implemented, using the context help code snippet. In between, the MPLAB AI Coding Assistant is used, to lend a hand here and there.
In closing, the SYS_CONSOLE is introduced, which offers similar functionality.







![Calculating TIE Jitter
This video demonstrates how to measure TIE jitter using a phase noise analyzer; phase noise power spectral density is integrated over a frequency range to derive rms phase noise amplitude.
PLEASE NOTE: The formula for Power[dBm] beginning at 1:38 in brown font is missing a pair of parentheses. In addition to the existing parentheses already in the formula, 50Ω*1mW should have parentheses around it as well so that the formula is Power[dBm]= 10 log10(V^2/(50Ω*1mW)) Calculating TIE Jitter](https://i.ytimg.com/vi/j9B2jJs-9ew/mqdefault.jpg)


