Uploaded October 2024 | Updated November 2026, 57 seconds ago
In this final episode of the series, we cover the final project Client device implementation, test the project, and measure the current consumption. We also cover some "gotchas" encountered while building the final project.
00:14 - In the previous video
00:21 - In this video
00:34 - Start new project and include libraries
01:07 - Define number of bytes to receive
01:30 - State machine enum
01:57 - Main function
02:15 - Init State - Initialize Ports
03:20 - Ports ISR and software flag
05:18 - SPI Client init function
05:59 - Sleep State
06:44 - Switch to High Speed Clock State
07:06 - Receive SPI State
08:55 - Switch to Low Power Clock State
09:11 - Write to USART State
10:22 - Testing low power performance
11:06 - Testing project using logic analyzer
11:53 - Loading effect of logic analyzer on low power performance
12:36 - "Gotchas" encountered during the final project and solutions
In this final episode of the series, we cover the final project Client device implementation, test the project, and measure the current consumption. We also cover some "gotchas" encountered while building the final project.
00:14 - In the previous video
00:21 - In this video
00:34 - Start new project and include libraries
01:07 - Define number of bytes to receive
01:30 - State machine enum
01:57 - Main function
02:15 - Init State - Initialize Ports
03:20 - Ports ISR and software flag
05:18 - SPI Client init function
05:59 - Sleep State
06:44 - Switch to High Speed Clock State
07:06 - Receive SPI State
08:55 - Switch to Low Power Clock State
09:11 - Write to USART State
10:22 - Testing low power performance
11:06 - Testing project using logic analyzer
11:53 - Loading effect of logic analyzer on low power performance
12:36 - "Gotchas" encountered during the final project and solutions





![Calculating TIE Jitter
This video demonstrates how to measure TIE jitter using a phase noise analyzer; phase noise power spectral density is integrated over a frequency range to derive rms phase noise amplitude.
PLEASE NOTE: The formula for Power[dBm] beginning at 1:38 in brown font is missing a pair of parentheses. In addition to the existing parentheses already in the formula, 50Ω*1mW should have parentheses around it as well so that the formula is Power[dBm]= 10 log10(V^2/(50Ω*1mW)) Calculating TIE Jitter](https://i.ytimg.com/vi/j9B2jJs-9ew/mqdefault.jpg)




