Uploaded July 2014 | Updated November 2026, 3 hours ago
While moving level ice is crushing against a fixed offshore structure it can evoke severe vibrations, especially if repeating ice crushing events synchronize with a natural frequency of the structure. First the problem was encountered in Cook Inlet, Alaska in 1960's and then ten years later in the Gulf of Bothnia, Finland. Scientific research has been conducted now for 50 years to explain the physical and mechanical background of ice induced frequency lock-in vibrations but still no unanimous understanding exists. Major reasons are due to inadequate data - both in scale model tests and especially in full-scale measurements. To cover pitfalls in scale model tests the Norwegian University of Science and Technology (NTNU) initiated at the beginning of 2011 the DIIV project - Deciphering Ice Induced Vibrations. The planned scale-model tests were accepted as a project in the EU-HYDRALAB IV Transnational Access Program. This paper describes the design of the test set-up, instrumentation and calibration, conducted tests, and the present status of data analysis and planned future work.
While moving level ice is crushing against a fixed offshore structure it can evoke severe vibrations, especially if repeating ice crushing events synchronize with a natural frequency of the structure. First the problem was encountered in Cook Inlet, Alaska in 1960's and then ten years later in the Gulf of Bothnia, Finland. Scientific research has been conducted now for 50 years to explain the physical and mechanical background of ice induced frequency lock-in vibrations but still no unanimous understanding exists. Major reasons are due to inadequate data - both in scale model tests and especially in full-scale measurements. To cover pitfalls in scale model tests the Norwegian University of Science and Technology (NTNU) initiated at the beginning of 2011 the DIIV project - Deciphering Ice Induced Vibrations. The planned scale-model tests were accepted as a project in the EU-HYDRALAB IV Transnational Access Program. This paper describes the design of the test set-up, instrumentation and calibration, conducted tests, and the present status of data analysis and planned future work.










