Uploaded July 2014 | Updated November 2026, 5 days ago
Ice/moored-structure collision tests and drop tests of ice blocks onto stiffened panels were carried out at Aalto University, Finland. In the experiments, focus was placed on simultaneous inelastic deformations of ice and a steel structure. Laboratory-grown freshwater ice blocks were used. During testing, a steel structure was impacted with an approximately one-ton ice block shaped as a truncated cube. A total of 18 impact tests in water and two drop tests in air were conducted. The impact tests in water were performed at speeds of 1 and 2 m/s for structures of different rigidity. In the drop tests, initial impact velocities were 3 m/s and 8m/s. This paper provides main findings and lessons learned from the execution of these tests.
Ice/moored-structure collision tests and drop tests of ice blocks onto stiffened panels were carried out at Aalto University, Finland. In the experiments, focus was placed on simultaneous inelastic deformations of ice and a steel structure. Laboratory-grown freshwater ice blocks were used. During testing, a steel structure was impacted with an approximately one-ton ice block shaped as a truncated cube. A total of 18 impact tests in water and two drop tests in air were conducted. The impact tests in water were performed at speeds of 1 and 2 m/s for structures of different rigidity. In the drop tests, initial impact velocities were 3 m/s and 8m/s. This paper provides main findings and lessons learned from the execution of these tests.










