WAVE RIPPLES IN MIXTURES OF COHESIVE CLAY AND COHESIONLESS SAND: PRELIMINARY RESULTS @HydralabEu
WAVE RIPPLES IN MIXTURES OF COHESIVE CLAY AND COHESIONLESS SAND: PRELIMINARY RESULTS  @HydralabEu
Uploaded July 2014 | Updated November 2026, 2 minutes ago
Novel large-scale flume experiments show that regular water surface waves require longer to reshape a flat bed into wave ripples if the bed consists of mixed cohesive clay and cohesionless sand than if the bed consists of pure sand. Yet, the equilibrium height and length of these bedforms are not affected by bed clay fraction. The delay in the growth rate of the wave ripples, which increases exponentially with increasing initial bed clay fraction, can be explained by the ability of the cohesive clay to bind sand grains together and thus increase the critical shear stress for bed erosion and decrease the erosion rate of the bed sediment. The constancy of equilibrium ripple height and length is related to the highly efficient entrainment (i.e., winnowing) of clay particles from the clayey sand through wave shear, which eventually produces wave ripples that comprise 100% clean sand and therefore have dynamic similarity to equilibrium ripples in sand that never contained clay. These findings imply that empirical equations for the prediction of the size of wave ripples, which are essential for sediment transport modelling in the marine environment, are valid for mixed sand-clay beds only if it can be proven that these bedforms are at equilibrium with the wave conditions. This requirement needs more awareness amongst scientists and practitioners, given that long delays in the formation of equilibrium wave ripples are associated with sand that contains only 4.6% clay. The highly efficient wave-induced winnowing of clay from the bed may adversely affect water quality, but it may also suspend nutrients to the benefit of marine organisms.
WAVE RIPPLES IN MIXTURES OF COHESIVE CLAY AND COHESIONLESS SAND: PRELIMINARY RESULTSFINDINGS AND LESSONS LEARNED FROM IMPLEMENTING ICE-STRUCTURE IMPACT TESTS IN WATER AND IN AIRICE MODEL TEST OF AN ICEBREAKING TANKER WITH FIXED DRIFT ANGLES IN LEVEL ICEPerforming geomorphological beach surveys using GPS technologyTopographic barriers and warm ocean currents controlling Antarctic ice shelf meltingHow to use Social MediaSmelling vortices: Animal tracking of chemical scents in turbulent, unidirectional flowsSTUDY OF INTERNAL MIXING AND NEAR-BED DYNAMICS INDUCED BY RESTRICTED STRATIFIED EXCHANGE FLOWSExperimental study on wave propagation in ice and the combined action of waves and ice on structuresICE LOAD MEASUREMENT BY TACTILE SENSOR: RUBBLE ICE TRANSPORT ON ARCTIC OFFSHORE STRUCTURESRUBBLE ICE TRANSPORT ON ARCTIC OFFSHORE STRUCTURES, SCALE MODEL INVESTIGATION OF LEVEL ICE ACTIONDeltares Individual Wave Overtopping Tests
Hydralab Project |

WAVE RIPPLES IN MIXTURES OF COHESIVE CLAY AND COHESIONLESS SAND: PRELIMINARY RESULTS

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER