Uploaded April 2023 | Updated September 2026, 2 weeks ago
This is a really quick video to show how to remove the IN and Out bar that will show up sometimes in Davinci Resolve. It has showed up on me several times over the last few years of learning Davinci Resolve and the first time was not pleasant at all. It took me much longer to get the bar removed than it should have. It is really easy to bump the "I" or "O" button on the keyboard and it will insert the bar. Removal of the bar is not as easy sometimes. If you realize it just popped up then easy enough, simply UNDO (CTRL + Z). The problem is of course, the time we don't realize it popped up and we have been making edits for some time. At that point we have to find how to remove it since its not as easy as it should be. Hope you find the video helpful and thanks for watching!
Northridge Fix Affiliate Links. Any purchase you make with below links helps support the channel. Thanks for your support!
NF AMTECH NC-559-V2 Flux 10mL if needed:
northridgefix.com/product/amtech-nc-559-v2-tf-flux-10ml-syringe-plunger-2-needle-sizes/?ref=thriftytoolshed
NF Low Melt Solder PK of 6 sticks if needed:
northridgefix.com/product/low-melt-solder-pack-of-6-sticks/?ref=thriftytoolshed
NF Premium Desolder Braid Wick if needed:
northridgefix.com/product/premium-desolder-braid-wick-10ft-length/?ref=thriftytoolshed
NF Dual Head ESD Safe Hard Cleaning Brush if needed:
northridgefix.com/product/dual-head-esd-safe-hard-cleaning-brush-for-circuit-boards-and-corrosion-removal/?ref=thriftytoolshed
NF Mechanic Tweezers if needed:
northridgefix.com/product/mechanic-diamond-high-precision-tweezer-non-stick-carbon-coating/?ref=thriftytoolshed
northridgefix.com/product/mechanic-king-version-ultra-fine-precision-curved-tweezer-red/?ref=thriftytoolshed
500 Port Charging Port connectors if needed:
northridgefix.com/product/500-charging-port-connectors-box-for-phones-tablets-and-other-electronics-repair/?ref=thriftytoolshed
SMD Capacitors and Resistors Component Binders if needed:
northridgefix.com/product/capacitors-and-resistors-component-binders-up-to-8500pcs-per-book-1206-805-603-402-201/?ref=thriftytoolshed
Solder wire 100g 60/40 if needed:
northridgefix.com/product/best-solder-wire-roll-100g-choose-from-0-3mm-and-0-8mm/?ref=thriftytoolshed
NF.Mini Soldering Pen if needed:
northridgefix.com/product/portable-nf-mini-soldering-pen/?ref=thriftytoolshed
NF V2.3 Microscope if needed:
northridgefix.com/product/microscope-camera-bundle-1080-60fps-180x-lens-ring-adapter-2-barlow-lenses-0-5x-0-75x/?ref=thriftytoolshed
Affiliate Link to NF Microscope Articulating arm if needed:
northridgefix.com/product/northridgefix-microscope-articulating-arm-stand-heavy-duty/?ref=thriftytoolshed
NF Microscope Anti Glare Light if needed:
northridgefix.com/product/microscope-anti-glare-light-heavy-duty/?ref=thriftytoolshed
NF.Short Voltage Injection tool if needed:
northridgefix.com/product/power-supply-short-injection-detector-with-voltage-and-current-control/?ref=thriftytoolshed
NF Universal Board Holder if needed:
northridgefix.com/product/universal-pcb-board-holder-fully-adjustable-jig-fixture/?ref=thriftytoolshed
NF Adjustable Clamp Arm Stand for camera if needed:
northridgefix.com/product/adjustable-clamp-arm-stand-thermal-camera-northridgefix/?ref=thriftytoolshed
NF HEPA Fume Extractor smoke absorber if needed:
northridgefix.com/product/hepa-fume-extractor-smoke-absorber-purifier-nf-fume/?ref=thriftytoolshed
NF Atten ST-862D Hot Air Station if needed:
northridgefix.com/product/atten-st-862d-hot-air-station-with-4-nozzles/?ref=thriftytoolshed
NF Grinding Pen with 7 tips if needed:
northridgefix.com/product/grinding-pen-for-traces-repair-chip-grind-cut-hole-7-tips-battery-operated/?ref=thriftytoolshed
UNI-T UTI260B Thermal Camera if needed:
northridgefix.com/product/uni-t-uti260b-thermal-imager-camera-256px-x-192px/?ref=thriftytoolshed
Amazon Affiliate links to some of my favorite Tools/Items if interested:
Any links you click on helps support the Channel and I greatly appreciate it!
DeWalt Cordless Gyroscopic Screwdriver if needed: amzn.to/3Eevk8f
amzn.to/35TETZB
Aftermarket 8V Battery for DeWalt screwdriver if needed: amzn.to/3Ix4euv
TOMLOV DM202 MAX Microscope if needed: amzn.to/3Uy0RIF
TOMLOV DM201M with built in DMM if needed: amzn.to/3mnLXZz
Cheap Spot Welder Board if needed: amzn.to/3WcRwWA
200MHZ Rigol DS1202Z-E scope if needed: amzn.to/35UVTLI
Weller 200W Iron if needed: amzn.to/30nzhT2
Hakko 888D Iron if needed: amzn.to/36TDWyv
ProStormer Hot Air Station if needed: amzn.to/3XIiKEY
Desoldering Gun if Needed: amzn.to/2SOTVIM
Extra Long Security bits if needed: amzn.to/3KVQNGQ
This is a really quick video to show how to remove the IN and Out bar that will show up sometimes in Davinci Resolve. It has showed up on me several times over the last few years of learning Davinci Resolve and the first time was not pleasant at all. It took me much longer to get the bar removed than it should have. It is really easy to bump the "I" or "O" button on the keyboard and it will insert the bar. Removal of the bar is not as easy sometimes. If you realize it just popped up then easy enough, simply UNDO (CTRL + Z). The problem is of course, the time we don't realize it popped up and we have been making edits for some time. At that point we have to find how to remove it since its not as easy as it should be. Hope you find the video helpful and thanks for watching!
Northridge Fix Affiliate Links. Any purchase you make with below links helps support the channel. Thanks for your support!
NF AMTECH NC-559-V2 Flux 10mL if needed:
northridgefix.com/product/amtech-nc-559-v2-tf-flux-10ml-syringe-plunger-2-needle-sizes/?ref=thriftytoolshed
NF Low Melt Solder PK of 6 sticks if needed:
northridgefix.com/product/low-melt-solder-pack-of-6-sticks/?ref=thriftytoolshed
NF Premium Desolder Braid Wick if needed:
northridgefix.com/product/premium-desolder-braid-wick-10ft-length/?ref=thriftytoolshed
NF Dual Head ESD Safe Hard Cleaning Brush if needed:
northridgefix.com/product/dual-head-esd-safe-hard-cleaning-brush-for-circuit-boards-and-corrosion-removal/?ref=thriftytoolshed
NF Mechanic Tweezers if needed:
northridgefix.com/product/mechanic-diamond-high-precision-tweezer-non-stick-carbon-coating/?ref=thriftytoolshed
northridgefix.com/product/mechanic-king-version-ultra-fine-precision-curved-tweezer-red/?ref=thriftytoolshed
500 Port Charging Port connectors if needed:
northridgefix.com/product/500-charging-port-connectors-box-for-phones-tablets-and-other-electronics-repair/?ref=thriftytoolshed
SMD Capacitors and Resistors Component Binders if needed:
northridgefix.com/product/capacitors-and-resistors-component-binders-up-to-8500pcs-per-book-1206-805-603-402-201/?ref=thriftytoolshed
Solder wire 100g 60/40 if needed:
northridgefix.com/product/best-solder-wire-roll-100g-choose-from-0-3mm-and-0-8mm/?ref=thriftytoolshed
NF.Mini Soldering Pen if needed:
northridgefix.com/product/portable-nf-mini-soldering-pen/?ref=thriftytoolshed
NF V2.3 Microscope if needed:
northridgefix.com/product/microscope-camera-bundle-1080-60fps-180x-lens-ring-adapter-2-barlow-lenses-0-5x-0-75x/?ref=thriftytoolshed
Affiliate Link to NF Microscope Articulating arm if needed:
northridgefix.com/product/northridgefix-microscope-articulating-arm-stand-heavy-duty/?ref=thriftytoolshed
NF Microscope Anti Glare Light if needed:
northridgefix.com/product/microscope-anti-glare-light-heavy-duty/?ref=thriftytoolshed
NF.Short Voltage Injection tool if needed:
northridgefix.com/product/power-supply-short-injection-detector-with-voltage-and-current-control/?ref=thriftytoolshed
NF Universal Board Holder if needed:
northridgefix.com/product/universal-pcb-board-holder-fully-adjustable-jig-fixture/?ref=thriftytoolshed
NF Adjustable Clamp Arm Stand for camera if needed:
northridgefix.com/product/adjustable-clamp-arm-stand-thermal-camera-northridgefix/?ref=thriftytoolshed
NF HEPA Fume Extractor smoke absorber if needed:
northridgefix.com/product/hepa-fume-extractor-smoke-absorber-purifier-nf-fume/?ref=thriftytoolshed
NF Atten ST-862D Hot Air Station if needed:
northridgefix.com/product/atten-st-862d-hot-air-station-with-4-nozzles/?ref=thriftytoolshed
NF Grinding Pen with 7 tips if needed:
northridgefix.com/product/grinding-pen-for-traces-repair-chip-grind-cut-hole-7-tips-battery-operated/?ref=thriftytoolshed
UNI-T UTI260B Thermal Camera if needed:
northridgefix.com/product/uni-t-uti260b-thermal-imager-camera-256px-x-192px/?ref=thriftytoolshed
Amazon Affiliate links to some of my favorite Tools/Items if interested:
Any links you click on helps support the Channel and I greatly appreciate it!
DeWalt Cordless Gyroscopic Screwdriver if needed: amzn.to/3Eevk8f
amzn.to/35TETZB
Aftermarket 8V Battery for DeWalt screwdriver if needed: amzn.to/3Ix4euv
TOMLOV DM202 MAX Microscope if needed: amzn.to/3Uy0RIF
TOMLOV DM201M with built in DMM if needed: amzn.to/3mnLXZz
Cheap Spot Welder Board if needed: amzn.to/3WcRwWA
200MHZ Rigol DS1202Z-E scope if needed: amzn.to/35UVTLI
Weller 200W Iron if needed: amzn.to/30nzhT2
Hakko 888D Iron if needed: amzn.to/36TDWyv
ProStormer Hot Air Station if needed: amzn.to/3XIiKEY
Desoldering Gun if Needed: amzn.to/2SOTVIM
Extra Long Security bits if needed: amzn.to/3KVQNGQ
