Peter Millard | Cutting The (tablesaw) Cord 1 Year Later [video 573] @10MinuteWorkshop | Uploaded 4 months ago | Updated 3 hours ago
I noticed a little bit of scorching on some cuts recently and I realised that I’ve had the little #Festool #cordless #tablesaw for almost exactly 12 months and I’ve never actually cleaned it out, so in this video I’m going to open it up and have a look, give the blade clean and while I’m doing all that we’ll have a chat about how the saw’s done over the last year. Enjoy!
+++++++++
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email to stay in touch.
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
+++++++++
Visit the 10MinuteWorkshop store for 10MW Products and project plans, at www.10minute.shop or in the product shelf directly beneath this video.
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at benchdogs.co.uk/?ref=1x_p0bagtnr
+++++++++
Other videos and playlists of interest:-
Festool’s Big Mistake? - youtu.be/Wc0MOV3HtjI
Why Buy This Saw - youtu.be/u7H5On0j_5c
It’s not good, it’s great! - youtu.be/28mywqdvXq4
Benchdogs CSC SYS Fence System - youtu.be/QmQW4YbCT3I
More Festool Table Saw *plus* a DIY Flip Stop! -
youtu.be/nlFB-7Dx2Qk
Aircraft grade plywood inserts - youtu.be/kA-LswBI_oY
DIY SYS-TOTE - youtu.be/vhW04TJCgMU
DIY Rail Stop - youtu.be/nWpSFoKJXeg
DIY Rail Guiderail Adapter - youtu.be/zzbS0yObBhk
Bargain or Burden; first look at wolfcrafts ‘MFT’ - youtu.be/pqy8IUnLDY4
3 MFT Rail Hinges - youtu.be/ywQoSh7G8KE
DIY Rail Hinge - youtu.be/sHj5G6t1qvY
MFT & MFT-related Playlist - http://bit.ly/MFT-related
Basic Builds Playlist - bit.ly/BasicBuilds
My Last Build & Install - bit.ly/MyLastBuild
Square Cuts: MFT or Rail Square? - youtu.be/3C8XSWliOys
+++++++++
Useful links:
Browse the 10MW Everyday Workshop Essentials list here - amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Trend blade cleaner - amzn.to/3WSSlaM
Benchdogs products gifted without obligation:-
Benchdogs CSC SYS Fence (gifted) - benchdogs.co.uk/collections/csc-fence-and-adaptor-plate/products/csc-fence-and-adaptor-plate?ref=1x_p0bagtnr
Benchdogs precision rulers (Gifted) - benchdogs.co.uk/collections/rulers?ref=1x_p0bagtnr
Benchdogs Precision triangle (Gifted) - benchdogs.co.uk/collections/precision-triangles/products/precision-triangle-bd450pt?ref=1x_p0bagtnr
Benchdogs carpenters square (Gifted) - benchdogs.co.uk/products/175mm-carpenter-square?_pos=1&_sid=4a2a8233f&_ss=r&ref=1x_p0bagtnr
Benchdogs Ultra COMBI Max square - benchdogs.co.uk/products/ultra-combi-max-square-320mm?ref=1x_p0bagtnr
Benchdogs precision rulers (gifted) - benchdogs.co.uk/collections/rulers?ref=1x_p0bagtnr
Benchdogs precision squares (gifted)- benchdogs.co.uk/products/stainless-steel-square-300?ref=1x_p0bagtnr
I noticed a little bit of scorching on some cuts recently and I realised that I’ve had the little #Festool #cordless #tablesaw for almost exactly 12 months and I’ve never actually cleaned it out, so in this video I’m going to open it up and have a look, give the blade clean and while I’m doing all that we’ll have a chat about how the saw’s done over the last year. Enjoy!
+++++++++
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email to stay in touch.
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
+++++++++
Visit the 10MinuteWorkshop store for 10MW Products and project plans, at www.10minute.shop or in the product shelf directly beneath this video.
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at benchdogs.co.uk/?ref=1x_p0bagtnr
+++++++++
Other videos and playlists of interest:-
Festool’s Big Mistake? - youtu.be/Wc0MOV3HtjI
Why Buy This Saw - youtu.be/u7H5On0j_5c
It’s not good, it’s great! - youtu.be/28mywqdvXq4
Benchdogs CSC SYS Fence System - youtu.be/QmQW4YbCT3I
More Festool Table Saw *plus* a DIY Flip Stop! -
youtu.be/nlFB-7Dx2Qk
Aircraft grade plywood inserts - youtu.be/kA-LswBI_oY
DIY SYS-TOTE - youtu.be/vhW04TJCgMU
DIY Rail Stop - youtu.be/nWpSFoKJXeg
DIY Rail Guiderail Adapter - youtu.be/zzbS0yObBhk
Bargain or Burden; first look at wolfcrafts ‘MFT’ - youtu.be/pqy8IUnLDY4
3 MFT Rail Hinges - youtu.be/ywQoSh7G8KE
DIY Rail Hinge - youtu.be/sHj5G6t1qvY
MFT & MFT-related Playlist - http://bit.ly/MFT-related
Basic Builds Playlist - bit.ly/BasicBuilds
My Last Build & Install - bit.ly/MyLastBuild
Square Cuts: MFT or Rail Square? - youtu.be/3C8XSWliOys
+++++++++
Useful links:
Browse the 10MW Everyday Workshop Essentials list here - amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Trend blade cleaner - amzn.to/3WSSlaM
Benchdogs products gifted without obligation:-
Benchdogs CSC SYS Fence (gifted) - benchdogs.co.uk/collections/csc-fence-and-adaptor-plate/products/csc-fence-and-adaptor-plate?ref=1x_p0bagtnr
Benchdogs precision rulers (Gifted) - benchdogs.co.uk/collections/rulers?ref=1x_p0bagtnr
Benchdogs Precision triangle (Gifted) - benchdogs.co.uk/collections/precision-triangles/products/precision-triangle-bd450pt?ref=1x_p0bagtnr
Benchdogs carpenters square (Gifted) - benchdogs.co.uk/products/175mm-carpenter-square?_pos=1&_sid=4a2a8233f&_ss=r&ref=1x_p0bagtnr
Benchdogs Ultra COMBI Max square - benchdogs.co.uk/products/ultra-combi-max-square-320mm?ref=1x_p0bagtnr
Benchdogs precision rulers (gifted) - benchdogs.co.uk/collections/rulers?ref=1x_p0bagtnr
Benchdogs precision squares (gifted)- benchdogs.co.uk/products/stainless-steel-square-300?ref=1x_p0bagtnr
![Cutting The (tablesaw) Cord 1 Year Later [video 573]](https://i.ytimg.com/vi/T5_9DQJC4v8/hqdefault.jpg "Cutting The (tablesaw) Cord 1 Year Later [video 573]
I noticed a little bit of scorching on some cuts recently and I realised that I’ve had the little #Festool #cordless #tablesaw for almost exactly 12 months and I’ve never actually cleaned it out, so in this video I’m going to open it up and have a look, give the blade clean and while I’m doing all that we’ll have a chat about how the saw’s done over the last year. Enjoy!
+++++++++
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email to stay in touch.
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
+++++++++
Visit the 10MinuteWorkshop store for 10MW Products and project plans, at www.10minute.shop or in the product shelf directly beneath this video.
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
+++++++++
Other videos and playlists of interest:-
Festool’s Big Mistake? - https://youtu.be/Wc0MOV3HtjI
Why Buy This Saw - https://youtu.be/u7H5On0j_5c
It’s not good, it’s great! - https://youtu.be/28mywqdvXq4
Benchdogs CSC SYS Fence System - https://youtu.be/QmQW4YbCT3I
More Festool Table Saw *plus* a DIY Flip Stop! -
https://youtu.be/nlFB-7Dx2Qk
Aircraft grade plywood inserts - https://youtu.be/kA-LswBI_oY
DIY SYS-TOTE - https://youtu.be/vhW04TJCgMU
DIY Rail Stop - https://youtu.be/nWpSFoKJXeg
DIY Rail Guiderail Adapter - https://youtu.be/zzbS0yObBhk
Bargain or Burden; first look at wolfcrafts ‘MFT’ - https://youtu.be/pqy8IUnLDY4
3 MFT Rail Hinges - https://youtu.be/ywQoSh7G8KE
DIY Rail Hinge - https://youtu.be/sHj5G6t1qvY
MFT & MFT-related Playlist - http://bit.ly/MFT-related
Basic Builds Playlist - https://bit.ly/BasicBuilds
My Last Build & Install - https://bit.ly/MyLastBuild
Square Cuts: MFT or Rail Square? - https://youtu.be/3C8XSWliOys
+++++++++
Useful links:
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Trend blade cleaner - https://amzn.to/3WSSlaM
Benchdogs products gifted without obligation:-
Benchdogs CSC SYS Fence (gifted) - https://benchdogs.co.uk/collections/csc-fence-and-adaptor-plate/products/csc-fence-and-adaptor-plate?ref=1x_p0bagtnr
Benchdogs precision rulers (Gifted) - https://benchdogs.co.uk/collections/rulers?ref=1x_p0bagtnr
Benchdogs Precision triangle (Gifted) - https://benchdogs.co.uk/collections/precision-triangles/products/precision-triangle-bd450pt?ref=1x_p0bagtnr
Benchdogs carpenters square (Gifted) - https://benchdogs.co.uk/products/175mm-carpenter-square?_pos=1&_sid=4a2a8233f&_ss=r&ref=1x_p0bagtnr
Benchdogs Ultra COMBI Max square - https://benchdogs.co.uk/products/ultra-combi-max-square-320mm?ref=1x_p0bagtnr
Benchdogs precision rulers (gifted) - https://benchdogs.co.uk/collections/rulers?ref=1x_p0bagtnr
Benchdogs precision squares (gifted)- https://benchdogs.co.uk/products/stainless-steel-square-300?ref=1x_p0bagtnr")
![Mirka Sander Giveaway [video 554]](https://i.ytimg.com/vi/TBSviP0F2Lg/hqdefault.jpg "Mirka Sander Giveaway [video 554]
This is the draw for my Mirka Sander giveaway. Thanks so much to everyone who took part, and also to my youtube pals Keith @RagnBoneBrown, Matt @MattEstlea, Aiden @THE-AIDEN-PROJECT and Jacob @Wintertons for their help and patience.
Thanks to Bloqs @bloqsuk for having us, more details of the facilities they offer at buildingbloqs.com
Thanks to @MirkaUK for the additional abrasives!
Congratulations to the winners. Ill be in touch soon.
Best, Peter.
+++++++++
Visit the 10MinuteWorkshop store for the Loose Tenon Jig 30 and ‘Square Enough’ assembly guides at www.10minute.shop
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I may earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Browse the Amazon Black Friday deals - https://www.amazon.co.uk/blackfriday?tag=tracking-21
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos and playlists of interest:-
Sanders Playlist - https://bit.ly/SandersPlaylist
Gift ideas and projects playlist - https://bit.ly/10MWGiftLists
Cabinetry basics playlist - http://bit.ly/CabinetryBasics
Loose tenons playlist - https://bit.ly/LooseTenons
Tracksaw workshop Playlist - http://bit.ly/TracksawWorkshop")
![I make a drilling guide for a router Jig?? [video 575]](https://i.ytimg.com/vi/TglP1kHDjSw/hqdefault.jpg "I make a drilling guide for a router Jig?? [video 575]
In this one I make a drill guide for a router jig, and I do it without a drill press or pillar drill. Enjoy!
+++++++++
This video uses the 10MW Router MultiJig, fll launch video here - https://youtu.be/V-K4rnD085o
You can buy or pre-order the plain jig here - https://10minuteworkshop.myshopify.com/products/router-multijig
You can buy or pre-order the full bundle here - https://10minuteworkshop.myshopify.com/products/router-multijig-full-bundle
There’s a feature-by-feature walkthrough video here - https://youtu.be/j01wYe9mUq0
And a reference guide available here - https://www.dropbox.com/scl/fi/l7c5sjtpjfcthnx96bchq/MultiJig-Reference-Guide-P1.pdf?rlkey=0p80cxbx7czuyvqdjc9h20qp6&st=s62r34d1&dl=0
+++++++++
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email to stay in touch.
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
+++++++++
Visit the 10MinuteWorkshop store for 10MW Products and project plans, at www.10minute.shop or in the product shelf directly beneath this video.
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
+++++++++
Other videos and playlists of interest:-
10MinuteWorkshop Router MultiJig - https://youtu.be/V-K4rnD085o
6 Top Tapes - https://youtu.be/zj_IKd8XYNI
DIY SYS-TOTE - https://youtu.be/vhW04TJCgMU
Aircraft grade plywood inserts - https://youtu.be/kA-LswBI_oY
Oak and Birch Ply drawers - https://youtu.be/tIbJ-93TMZw
Sharp and a little bit Scary - https://youtu.be/EBJZlI9IVlI
Bargain or Burden; first look at Wolfcraft ‘MFT’ - https://youtu.be/pqy8IUnLDY4
3 Quick Fixes (Wolfcraft ‘MFT’) - https://youtu.be/3qCU8dzIJ_c
+++++++++
Useful links:
Everything in this video on one list here - https://amzn.to/4eaUSn6
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Used in this video:
Trend extra length guide bush - https://amzn.to/3Rcbzo4
Bosch Pro 30mm Forstner bit - https://amzn.to/3VtxM3E
Bosch Pro 20mm Forstner bit - https://amzn.to/4eckb8q
Fisch 5mmm lip & spur / brad point bit - https://amzn.to/4aNq9th
Fisch 8mm lip & spur / brad point bit- https://amzn.to/4e6tKFN
KWB Drillblock - https://amzn.to/3V8IhrW
Sleeve bearings 5 x 8 x 16mm - https://amzn.to/3RakGG3
3M strong double-sided tape - https://amzn.to/3x3MBk0
Thin plywood sheets - https://amzn.to/45e2npm
5mm steel dowel pins - https://amzn.to/3Kru3NQ
Tailors’ awl - https://amzn.to/4aBHCVx
Trend GB/US/30 PorterCable style screw-on guide bush - https://amzn.to/3wOPyo1 (US: https://amzn.to/3ICmDqa)")
![[*Gifted/Ad] Quick & Easy DIY Shelf Pin Router Jig [video 506]](https://i.ytimg.com/vi/ToV8Tu7yB_4/hqdefault.jpg "[*Gifted/Ad] Quick & Easy DIY Shelf Pin Router Jig [video 506]
In this video I make a simple router jig to make shelf pin holes quickly and accurately with any router using a 30mm guide bush. Enjoy!
+++++++++
Become a 10minuteworkshop Plus member - more details at 10minuteworkshop.com, sign up directly at 10minuteworkshop.plus
**Support 10 Minute Workshop as a YouTube Member** http://bit.ly/10minuteMember
**Support 10 Minute Workshop on Patreon** - http://www.patreon.com/10minuteworkshop
**Please note that I am moving away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
Drill Press Table - https://youtu.be/9w-MtpmBUWs
Fencedogs - https://youtu.be/DezSQjhcbbk
Cotton-reel drill jig - https://youtu.be/iueaEE9GSKE
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
+++++++++
*Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs and Rennie Tools affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Note that prices fluctuate - some have risen since I made my purchases.
Used / featured in this video:-
Benchdogs precision rulers (Gifted) - hhttps://benchdogs.co.uk/collections/rulers?ref=1x_p0bagtnr
Benchdogs Precision triangle (Gifted) - https://benchdogs.co.uk/collections/precision-triangles/products/precision-triangle-bd450pt?ref=1x_p0bagtnr
Benchdogs T-square (Gifted) - https://benchdogs.co.uk/collections/t-square/products/t-square?ref=1x_p0bagtnr
Benchdogs carpenters square (Gifted) - https://benchdogs.co.uk/products/175mm-carpenter-square?_pos=1&_sid=4a2a8233f&_ss=r&ref=1x_p0bagtnr
3M 9088 double-sided tape - https://amzn.to/3u2Ekqw
Bosch professional 30mm forester bit - https://amzn.to/3SRIUmS (US: https://amzn.to/3Mf9sfS)
5mm clevis (registration) pins - https://amzn.to/3yhTiMM
5mm shelf pins - https://amzn.to/3MdBqbv
Shelf pin bit (1/4” shank x 4.76mm carbide spiral upcut shelf pin bit) - https://www.rennietool.co.uk/collections/solid-carbide-router-bits/products/solid-carbide-2-flute-spiral-flute-up-cut-router-bits?variant=39632460709975&aff=2
Trend 30mm guide bush - https://amzn.to/3CbcBsl
Trens T18 router - https://amzn.to/3e7aX33
Other handy gear:-
SanderCard - https://amzn.to/3c1yh17 (US - https://amzn.to/3QUvcz2)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
+++++++++")
![The Parallel clamps Have To Go! [video 564]](https://i.ytimg.com/vi/U5ZzlVuQa9g/hqdefault.jpg "The Parallel clamps Have To Go! [video 564]
So I’m probably going to lose my YouTubers licence for this, but I’m afraid my parallel jaw clamps are going to have to go, and in this video I’m just going to explain why that is, and how you can get your hands on them as I’ll be giving these away. Enjoy!
+++++++++
Join the 10MinuteWorkshop Plus community, more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
+++++++++
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email to stay in touch and get the all the 10MW factsheets, included in the next issue.
Can’t wait? Become a 10minuteworkshop Plus member* and get the factsheets, free plans and other exclusive member content right away - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
*Behind the Scenes, Marking Out and At the Bench members have instant access as part of their subscription
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
+++++++++
Visit the 10MinuteWorkshop store for the Loose Tenon Jig 30 and ‘Square Enough’ assembly guides at www.10minute.shop
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
+++++++++
Other videos and playlists of interest:-
5 Basic Clamps - https://youtu.be/kfWIsh-X8HQ
2 Clamp racks - https://youtu.be/qJ4niRhu4zY
Tracksaw Launchpad - https://youtu.be/z8Jp9oSXGh4
Scary, sharp - https://youtu.be/EBJZlI9IVlI
Tiny 12v tracksaw - https://youtu.be/E6cQbJcjFCg
Sanders Playlist - https://bit.ly/SandersPlaylist
Base cabinet basics - https://bit.ly/BaseCabBasics
My last build & Install - https://bit.ly/MyLastBuild
Festool Domino - http://bit.ly/AllAboutlDomino
+++++++++
Useful links:
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com")
![Tracksaw PictureFrame [video 514]](https://i.ytimg.com/vi/UuWLWT-ZKTg/hqdefault.jpg "Tracksaw PictureFrame [video 514]
In this one I make a #picture #frame using just a #tracksaw. Why? Because I was asked to! Thanks Dafydd @thedeafmaker for asking the question over on 10MW Plus!
.
Follow Dafydd here - https://www.instagram.com/thedeafmaker/
.
Now, to be absolutely clear, I do not recommend this as a method for aspiring picture frame makers to go into production - there’s a reason why commercial framers use cast iron Morso guillotines - but, if you need a quick frame making - or perhaps a last-minute gift - and all you have available is a tracksaw, then yes, it’s absolutely doable. Enjoy!
This is my last scheduled public YouTube video for 2022, thank you so much for watching. Ill be back in 2023, but not until February; I’ve been posted regular videos for six years now, pretty much without missing a beat, and I think it’s time to take a breather. I’ll still be posting regularly to the members at 10MinuteWorkshop Plus and the public YouTube videos will resume in February, but for January I’ll be taking a break and catching up with family, where I can.
My very best wishes for the festivities, and Ill see you next year.
Peter
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
**Support 10 Minute Workshop as a YouTube Member** http://bit.ly/10minuteMember
**Support 10 Minute Workshop on Patreon** - http://www.patreon.com/10minuteworkshop
**Please note that I am moving away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
Cheap & Easy Tracksaw Mitre Jig - https://youtu.be/2SwGl5pzGHY
Mondrian-style table - https://youtu.be/bq7amS5MkPI
3 Drawers, no tape, no ruler - https://youtu.be/ObR9kbXu8PQ
Storage Cubes - https://youtu.be/Gyv-oGKRF30
Plywood shelves - https://youtu.be/gNobuRCBr_Q
Little Plywood Boxes - https://youtu.be/qg1jdYy0QTE
Drill Press Table - https://youtu.be/9w-MtpmBUWs
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
New to track saws? Tracksaw workshop & all tracksaw-related videos in a playlist here - http://bit.ly/TracksawWorkshop
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Handy consumables & gear:-
Note that prices fluctuate - some have risen since I made my purchases.
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at benchdogs.co.uk
Benchdogs precision rulers (Gifted) - https://benchdogs.co.uk/collections/rulers?ref=1x_p0bagtnr
O3Adhesive CA glue. Use offer code 10MinuteWorkshop at checkout for 10% discount across the board at O3 Adhesives - https://www.o3adhesives.co.uk/?sca_ref=2935180.i6dkKK25CM
03 thick black CA adhesive & activator bundle - https://www.o3adhesives.co.uk/products/o3a-thick-black-50ml-with-o3a-aerosol-activator-200ml-bundle?sca_ref=2935180.i6dkKK25CM
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Stainless steel graphics knife, Olfa SAC-1 - https://amzn.to/3DnWzvJ
Polyvine Polyten PVA - https://amzn.to/2EY9Dgf (US(crazy price, just for reference) https://amzn.to/2Tm7RsC)
Tongue depressors (waxing spatulas) - https://amzn.to/2zpHlp8 (US: similar) https://amzn.to/2S1QLP7)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![10MW Router MultiJig: one jig, many uses... [video 574]](https://i.ytimg.com/vi/V-K4rnD085o/hqdefault.jpg "10MW Router MultiJig: one jig, many uses... [video 574]
In this one it’s my pleasure to formally launch the next 10MinuteWorkshop product, the Router MultiJig. A little like a Swiss army knife of router jigs, it covers seven broad use cases; there are three types of handle cut-outs, four sizes of bar handle fixings positions, there’s a run of five holes on 32mm centres eg for shelf-pins, concealed hinge and hinge plate marking positions, there are offset dog hole extension holes for a traditional 96mm grid MFT top, there are inline dog hole extension for alternative 128mm grid MFT tops, and there are corner radii that’ll give you four different corner sizes.
There’s a feature-by-feature walkthrough video here - https://youtu.be/j01wYe9mUq0
And a free reference guide available here - https://www.dropbox.com/scl/fi/l7c5sjtpjfcthnx96bchq/MultiJig-Reference-Guide-P1.pdf?rlkey=0p80cxbx7czuyvqdjc9h20qp6&st=s62r34d1&dl=0
You can buy or pre-order the plain jig here - https://10minuteworkshop.myshopify.com/products/router-multijig
You can buy or pre-order the full bundle here - https://10minuteworkshop.myshopify.com/products/router-multijig-full-bundle
Makers Central clip courtesy of The Garage Workshop https://www.youtube.com/@thegarageworkshop4791 - thanks Roger!
+++++++++
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email to stay in touch.
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
+++++++++
Visit the 10MinuteWorkshop store for 10MW Products and project plans, at www.10minute.shop or in the product shelf directly beneath this video.
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
+++++++++
Other videos and playlists of interest:-
DIY SYS-TOTE - https://youtu.be/vhW04TJCgMU
Aircraft grade plywood inserts - https://youtu.be/kA-LswBI_oY
Oak and Birch Ply drawers - https://youtu.be/tIbJ-93TMZw
Sharp and a little bit Scary - https://youtu.be/EBJZlI9IVlI
Bargain or Burden; first look at Wolfcraft ‘MFT’ - https://youtu.be/pqy8IUnLDY4
3 Quick Fixes (Wolfcraft ‘MFT’) - https://youtu.be/3qCU8dzIJ_c
+++++++++
Useful links:
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Trend GB/US/30 PorterCable style screw-on guide bush - https://amzn.to/3wOPyo1 (US: https://amzn.to/3ICmDqa)
Rennie tools 5mm & 4.76mm - https://bit.ly/SpiralUpcut
Bench dog collars from SP Wood Creations - https://bit.ly/Benchdog-collars
Trend 20mm MFT bit - https://amzn.to/3R24syI
Tailors’ awl - https://amzn.to/4aBHCVx
Trend blade cleaner - https://amzn.to/3WSSlaM
Bessey DuoKlamp - https://amzn.to/3eDz1Ig
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH
Stainless steel graphics knife, Olfa SAC-1 - https://amzn.to/3DnWzvJ
BicMatic Fine point 0.5mm pencils - https://amzn.to/3uldrlX")
![I Make 5 Fake Plywood Joints [video 540]](https://i.ytimg.com/vi/V1nWpH6EyL4/hqdefault.jpg "I Make 5 Fake Plywood Joints [video 540]
In this one I #fake 5 basic #woodwork joints using just a sheet of #plywood and explain why you might want to do that, and on which projects. Enjoy.
#basicwoodworking
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I may earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
+++++++++
Become a 10minuteworkshop Plus member for additional content and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Sign up for the newsletter at 10minuteworkshop.email or 10MW.email and get the free 5 Glues I use fact sheet; actually, it might be 6... 🤔
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
What’s the Point of a Joint? - https://youtu.be/vGDUBy5mx78
It’s not good - it’s great! - https://youtu.be/28mywqdvXq4
Strong, or Strong enough? - https://youtu.be/6jRqt1HBHsM
Tracksaw Picture Frame - https://youtu.be/UuWLWT-ZKTg
Why Buy This Saw? - https://youtu.be/u7H5On0j_5c
Festool’s Big Mistake? - https://youtu.be/Wc0MOV3HtjI
3 Drawers, no tape, no ruler - https://youtu.be/ObR9kbXu8PQ
Basic Builds playlist - https://bit.ly/BasicBuilds
+++++++++
Useful links:
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Handy consumables & gear:-
Fast grab PVA - https://amzn.to/3Ec0qwX
Festool CSCSYS50 [price hike!!] - https://amzn.to/3X6tnD1
Festool OF1400 - https://amzn.to/3Q7SljY
Festool CTL Midi vac with bluetooth - https://amzn.to/3q9RnZK
Bluetooth button (worth every penny!) - https://amzn.to/3DtSYfZ")
![Plywood shop cabinets, no tape, no rule, no square. [video 555]](https://i.ytimg.com/vi/VVYDTVVZFxg/hqdefault.jpg "Plywood shop cabinets, no tape, no rule, no square. [video 555]
In this one I’m making some simple #plywood wall #cabinets for the #workshop, but without using a tape measure, a rule, or a square, and without nails or screws. I’ll be making housings and rebates (dados and rabbets) but I won’t be using a router or a table saw, just a tracksawsaw, and I’m doing this not to make life difficult for myself, but to remind ourselves that folks have been making nicely turned out bits of woodwork for thousands of years, long before we had fancy tools and that a lot of the time, all you really need is a piece of string or a mark on a stick for the overall dimensions - everything else you can work from those basic measurements. Enjoy!
Stuck for gift ideas? Check out my 2023 Gift List video here - https://youtu.be/cCOUz_tmVeY
Not sure which glue to use? Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email and get the free 5 Glues I use factsheet.
+++++++++
Visit the 10MinuteWorkshop store for the Loose Tenon Jig 30 and ‘Square Enough’ assembly guides at www.10minute.shop
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I may earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Browse the Amazon Black Friday deals - https://www.amazon.co.uk/blackfriday?tag=tracking-21
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
+++++++++
Become a 10minuteworkshop Plus member for exclusive content - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos and playlists of interest:-
5 Fake Joints - https://youtu.be/V1nWpH6EyL4
Plywood reference square - https://youtu.be/aNjO4SBe5kw
Easy accurate repeat cuts - https://youtu.be/vHX5j2820nk
Which glue when? - https://youtu.be/yEQYirGvWCs
Tracksaw workshop Playlist - http://bit.ly/TracksawWorkshop
Base cabinet basics - https://bit.ly/BaseCabBasics
Cabinetry basics playlist - http://bit.ly/CabinetryBasics
+++++++++
Useful links:
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
See the full Gift List 2023 on Amazon here - https://amzn.to/3R6GjHG
Hultafors Talmeter tape measure - https://amzn.to/3rdewuP
Benchdogs precision rulers (Gifted) - https://benchdogs.co.uk/collections/rulers?ref=1x_p0bagtnr
Benchdogs Precision triangle (Gifted) - https://benchdogs.co.uk/collections/precision-triangles/products/precision-triangle-bd450pt?ref=1x_p0bagtnr
Benchdogs carpenters square (Gifted) - https://benchdogs.co.uk/products/175mm-carpenter-square?_pos=1&_sid=4a2a8233f&_ss=r&ref=1x_p0bagtnr")
![Benchdogs Tools Factory Tour [video 585][Ad]](https://i.ytimg.com/vi/VsDaRGE_gko/hqdefault.jpg "Benchdogs Tools Factory Tour [video 585][Ad]
This video is sponsored by Skillshare. The first 500 people to use my link will get a 1 month free trial of Skillshare https://skl.sh/petermillard09241
I know, two Benchdogs videos on the bounce, but I’ve been off helping my daughter move into her new place this week, and this is all I have ready to go.
So, in this one I share a recent - and rare - behind the scenes tour of the 20,000 sq ft Benchdogs Tools factory and testing facility in Somerset, with Benchdogs Tools founder Ralph Mignano. Enjoy!
Table of Contents:
00:00 Introduction
00:55 MFT tops CNC
01:38 Milling section
02:47 New product preview
03:12 Skillshare sponsor read
05:25 Sliders
07:04 Flattening machine
08:01 Custom packaging
09:27 Laser room
11:00 Shipping & handling
11:38 Anodising plant
13:06 Outro
Related content:
Benchdogs Big Base - https://youtu.be/QqBN26Q67kM
Benchdogs Ultra MFT Workstation First Look - https://youtu.be/qZK7BWI-PH0
Square Cuts: MFT or Rail Square? - https://youtu.be/3C8XSWliOys
Portable Bench Build - https://youtu.be/7OqrljJHOaw
Ultralight Portable Bench - https://youtu.be/oEiiVAiBvt0
Metabos £200/$250 MFT - https://youtu.be/aWozkUUDdc8
MFT & MFT-related Playlist - http://bit.ly/MFT-related
Bargain or Burden; first look at Wolfcraft ‘MFT’ - https://youtu.be/pqy8IUnLDY4
3 Quick Fixes (Wolfcraft ‘MFT’) - https://youtu.be/3qCU8dzIJ_c
3 MFT Rail Hinges - https://youtu.be/ywQoSh7G8KE
DIY Rail Hinge - https://youtu.be/sHj5G6t1qvY
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
Backyard, Budget DIY MFT -https://youtu.be/xIi-I04ocVM
No going back (Our Big Build primer) - https://youtu.be/eULepp_7CIM
Making Plans (Our Big Build 2) - https://youtu.be/Gd9RVXruLbk
One Smaller Stool [video 576] - https://youtu.be/KDe7ZQO83mE
Newsletter and memberships:
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email to stay in touch.
Join the conversation as a 10minuteworkshop Plus member and get the factsheets, free plans* and other exclusive member content right away - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
*Behind the Scenes, Marking Out and At the Bench members have instant access as part of their subscription
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Store:
Visit the 10MinuteWorkshop store for 10MW Products and project plans, at www.10minute.shop or in the product shelf directly beneath this video.
Affiliate Links:
As an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Portable workbenches - https://amzn.to/4csRhOW
See the tech specs of the Ultra MFT Workstation here - https://benchdogs.co.uk/collections/ultra-mft-workstation?ref=1x_p0bagtnr
View the full Benchdogs Fence systems here - https://benchdogs.co.uk/collections/fence-systems-1?ref=1x_p0bagtnr
Benchdogs Quad rail hinge here - https://benchdogs.co.uk/collections/hinge-system?ref=1x_p0bagtnrsystem")
![An £85,000 saw? I take you on a tour of my local timberyard for a closer look. [video 447]](https://i.ytimg.com/vi/W66tCi3KT3s/hqdefault.jpg "An £85,000 saw? I take you on a tour of my local timberyard for a closer look. [video 447]
A slightly different vlog-style video for you this week as Im given a tour of my local timberyard, and take a closer look at their new £85k (~$118k) beam saw. Enjoy!
Thanks so much to Jarlath at Fergusons timber yard for taking the time to show mw the new setup - check them out at ajferguson.co.uk and on Instagram @ajfergusontimber
Take a look at Daves instagram @hamadryad527
NB; the video was shot under ‘challenging’ conditions with high levels of background noise, so please excuse the sub-par audio at times.
++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Handy gear to have:-
This is the first video I’ve shot completely on a GoPro Hero 9, which is excellent - https://amzn.to/3cR1Ekk (US: https://amzn.to/3fJ8cmE)
Rode wireless go (newer better model just announced) - https://amzn.to/3woBJZ3 (US(new model):https://amzn.to/2R7bZjE)
Rode lavalier Go mic - https://amzn.to/39JyqSm (US: https://amzn.to/3wqPRkh)
Audio recorder, Zoom H1n - https://amzn.to/2OJ7CFh (US: https://amzn.to/2NuFrgX)
Other handy gear:-
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++
cabinets, casings, carcass, Routing, router, MFT, Workshop shelves, shop cabinets, plywood, redwood, Birch ply, drawers, boxes, storage, shop storage, shelves, pine,
.")
