Uploaded October 2026 | Updated November 2026, 2 days ago
This is a lamp I made back in the mid-2000s, which puts it at or close to 'vintage' by now. This has gone through a few iterations over the years, but the concept remained the same.
It originally used a smaller board on top and a small 12v computer style fan was added to draw the heat from the bulb out the top of the unit. It was used like this for several years. In the early 2010s, I modified the top to be larger, removed the fan, and left the back side open so the heat can escape through convection.
The shade is a simple sheet of wax paper, which is surprisingly effective at making the light soft on the eyes yet still allows a lot of light to diffuse around the room. The light fixture itself is a basic plastic keyless unit with a lamp cord attached. The lamp cord has an in-line switch and a very large plug. I remember putting this together with my grandfather.
I used this lamp in it's current state (it looked better before it sat in the closet for years) for a very long time, well into the mid-2010s. I only stopped using it as my interest in lighting ramped up and I started acquiring some vintage lamps which I wanted to use instead.
When first built, I remember using it with awful "daylight" incandescent bulbs as I thought those were the brightest option at the time (they're not, but I didn't know any better). Towards the end of when I was using this, I switched to regular 43 soft white halogen bulbs.
While the build quality is very sketchy due to not having the correct tools or carpentry knowledge at the time, the concept is excellent and I still really like it to this day. It's brilliant in the sense that it takes up no space on the table -- the space is regained on the top of the lamp. I remember using many different fans on top of it over the years, as well as some cordless phones.
Perhaps some day I will build another one of these, out of nicer materials and a sturdier build.
This is a lamp I made back in the mid-2000s, which puts it at or close to 'vintage' by now. This has gone through a few iterations over the years, but the concept remained the same.
It originally used a smaller board on top and a small 12v computer style fan was added to draw the heat from the bulb out the top of the unit. It was used like this for several years. In the early 2010s, I modified the top to be larger, removed the fan, and left the back side open so the heat can escape through convection.
The shade is a simple sheet of wax paper, which is surprisingly effective at making the light soft on the eyes yet still allows a lot of light to diffuse around the room. The light fixture itself is a basic plastic keyless unit with a lamp cord attached. The lamp cord has an in-line switch and a very large plug. I remember putting this together with my grandfather.
I used this lamp in it's current state (it looked better before it sat in the closet for years) for a very long time, well into the mid-2010s. I only stopped using it as my interest in lighting ramped up and I started acquiring some vintage lamps which I wanted to use instead.
When first built, I remember using it with awful "daylight" incandescent bulbs as I thought those were the brightest option at the time (they're not, but I didn't know any better). Towards the end of when I was using this, I switched to regular 43 soft white halogen bulbs.
While the build quality is very sketchy due to not having the correct tools or carpentry knowledge at the time, the concept is excellent and I still really like it to this day. It's brilliant in the sense that it takes up no space on the table -- the space is regained on the top of the lamp. I remember using many different fans on top of it over the years, as well as some cordless phones.
Perhaps some day I will build another one of these, out of nicer materials and a sturdier build.





![Blade Swap | Lasko B20540 Power Plus Box Fan and Lasko H20301 High Velocity Fan
Blade swap between the Lasko B20540 Power Plus box fan and the Lasko H20301 High Velocity fan. Very interesting results I was not expecting.
The petal blade from the box fan seemed to put more load on the HV fans motor than the default blade. There was enough of an increase in drag to create better speed variance out of the motor. The petal blade was significantly quieter on all speeds, but did result in a slight reduction in air flow. I would consider it overall a better fit, the massive increase in speed variance and significant reduction in noise are both worth a slight reduction in air movement to me. The HV fan was still very powerful with the petal blade.
The box fan didnt change much at all between the two blades in any respect. Im really not sure why this is considering how much of a difference there was on the HV fan. Perhaps the limitation on the box fan is the aerodynamic design, the restrictive plastic guards paired with the round blades being inside a box with varying turbulence. A box fan without a venturi ring really is an aerodynamics disaster.
I think both of these units look pretty cool with the opposite blades, especially the PowerPlus. I think having the metal blade in that unit works very well with the marketing and probably would have had better success than that awful all metal unit Lasko sold in the 2010s for a short period of time.
The specifications recorded during the video are as follows, represented as [Power (watts) / Wind Speed Close (MPH) / Wind Speed from ~5 Away (MPH) / Air Flow (CFM) / Efficiency (CFM/watt)].
Power Plus, default blade:
Low: 71 / 8.2 / 5 / 1,073 / 15.
Medium: 87 / 10.2 / 6 / 1,321 / 15.
High: 100 / 12 / 6 / 1,460 / 14.6.
Power Plus, H20301 blade:
Low: 70 / 9 / 6 / 1,101 / 15.7.
Medium: 86 / 11 / 6 / 1,349 / 15.7.
High: 99 / 11.6 / 7 / 1,514 / 15.3.
H20301, default blade:
Low: 93 / 13 / 8 / 1,509 / 16.2.
Medium: 105 / 15 / 9 / 1,739 / 16.6.
High: 127 / 16.5 / 10 / 1,840 / 14.5.
H20301, Power Plus blade:
Low: 96 / 10 / 6 / 1,293 / 13.5.
Medium: 107 / 11.6 / 7 / 1,432 / 13.4.
High: 130 / 14.5 / 9 / 1,817 / 14. Blade Swap | Lasko B20540 Power Plus Box Fan and Lasko H20301 High Velocity Fan](https://i.ytimg.com/vi/Ga6fcIt14_M/mqdefault.jpg)




